Re: target/initiator device
"Eddy Quicksall" <[email protected]>
| Newsgroups | gmane.ietf.ips |
|---|---|
| Message-ID | <[email protected]> |
Thanks, my error. I re-read it and it does not require the target and initiator ports to have identical names. ----- Original Message ----- From: Julian Satran To: Eddy Quicksall Cc: [email protected] Sent: Saturday, July 02, 2005 3:26 AM Subject: Re: [Ips] target/initiator device Eddy, Bassically iSCSI is using SAM2 as reference. However the name types for iSCSI initiator and target are not different. And since SAM3 has separate initiator port and target port in a combined device the same iSCSI name CAN be used for naming both ports using the iSCSI naming conventions for ports. Julo "Eddy Quicksall" <[email protected]> Sent by: [email protected] 01/07/2005 21:43 To <[email protected]> cc Subject [Ips] target/initiator device How does iSCSI work as a target/initiator device? i.e., iSCSI has different types of names for the initiator and target names but paragraph 4.7.3 in SAM 3 appears to need a common name between the two. Eddy_______________________________________________ Ips mailing list [email protected] https://www1.ietf.org/mailman/listinfo/ips _______________________________________________ Ips mailing list [email protected] https://www1.ietf.org/mailman/listinfo/ips