Re: IGMPv3 EXCLUDE filter Source problem

you asked "how you would translate an EXCLUDE to a PIM join/prune message"
with the non-binding caveat "IGMPv3 deployment is for SSM"... according to
the contents of the table in section 6.3 of RFC 3376, an EXCLUDE'd source is
translated by the IGMP module as a suggestion to the multicast router to
"not forward traffic from the source". i wasn't commenting on any other
suggestion(s).\

On 6/5/07, John Zwiebel <[email protected]> wrote:
>
>
> On Jun 5, 2007, at 2:28 PM, mighty wrote:
>
> section 6.3 of RFC 3376, "IGMPv3 Source-Specific Forwarding Rules",
> outlines the forwarding suggestions the IGMP module should make to the
> multicast router. in the case of EXCLUDE group record with source records,
> the table reads:
>
>
> So???
>
> That has nothing to do with the questions I asked nor with
> the suggestion that tech engineer might want to talk to someone
> other than the folks on this list.
>
> You can prove whatever you like on this list, but that isn't going to get
> anything changed
> nor is it going to make "tech engr"'s testing results change.
>

_______________________________________________
magma mailing list
[email protected]
https://www1.ietf.org/mailman/listinfo/magma