Re: Play tone and signal on inactive terminations?

Is it applicable to ephemeral termination also?

________________________________

From: Kevin Boyle [mailto:[email protected]] 
Sent: Friday, March 28, 2008 12:05 PM
To: Suchi Sahoo (suchis); [email protected]
Subject: RE: [Megaco] Play tone and signal on inactive terminations?


Per H.248.1, the Mode Property does not affect Signals.  See clause
7.1.11.
 
Per H.248.1, Properties are returned to their default value upon
Subtract, unless overridden by provisioning.  If overridden, they return
to their provisioned value.  See clause 7.2.3.  For the Mode Property,
the default is "Inactive".  See clause 7.1.7.1.1.
 
Kevin

________________________________

From: [email protected] [mailto:[email protected]] On Behalf
Of Suchi Sahoo (suchis)
Sent: Friday, March 28, 2008 12:31 PM
To: [email protected]
Subject: [Megaco] Play tone and signal on inactive terminations?


Hi,
  I want to know if we can play tone or signal on a termination which is
in INACTIVE mode. Let's say initially the physical terminations are in
NULL context. That time the default mode is INACTIVE. Can we play dial
tone when the mode of the physical termination is INACTIVE? 
 
If a termination is in SEND_RECV mode and we subtract that termination,
what will be the new mode of this termination in NULL context after it
is subtracted by gateway? Will it be INACTIVE or SEND_RECV? 
 
Thanks,
Suchi

_______________________________________________
Megaco mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/megaco