Re: IP 0.0.0.0 In remote descriptor

Setting IP in c line to 0.0.0.0 is one of the ways of putting call on Hold.

Receiving c=IN IP4 0.0.0.0 in remote descriptor can inform the receiving party that the call has been put on hold by the remote party.


With Regards,

Divij Agarwal
Senior Software Engineer
A R I C E N T


-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Tom Taylor
Sent: Wednesday, September 03, 2008 5:59 AM
To: megaco ietf
Cc: BEHAR ALDANA RONALD
Subject: [Megaco] IP 0.0.0.0 In remote descriptor

For some reason the following message was bounced from the list. I am forwarding
it on, copy the originator.

Tom Taylor

> ------------------------------------------------------------------------
>
> Subject:
> IP 0.0.0.0 In remote descriptor
> From:
> "BEHAR ALDANA RONALD" <[email protected]>
> Date:
> Tue, 2 Sep 2008 11:56:22 +0200
> To:
> <[email protected]>
>
> To:
> <[email protected]>
>
>
> Hi to all
>
> Is IP 0.0.0.0 valid as a connection information in a remote descriptor.
>
> c= IN IP4 0.0.0.0
>
> regards
>
> CTAC Engineer
> Madrid/Spain
>
>



-------- Original Message --------
Subject: Uncaught bounce notification
Date: Tue, 02 Sep 2008 02:56:24 -0700
From: [email protected]
To: [email protected]

The attached message was received as a bounce, but either the bounce
format was not recognized, or no member addresses could be extracted
from it.  This mailing list has been configured to send all
unrecognized bounce messages to the list administrator(s).

For more information see:
https://www.ietf.org/mailman/admin/megaco/bounce



"DISCLAIMER: This message is proprietary to Aricent and is intended solely for the use of the individual to whom it is addressed. It may contain privileged or confidential information and should not be circulated or used for any purpose other than for what it is intended. If you have received this message in error,please notify the originator immediately. If you are not the intended recipient, you are notified that you are strictly prohibited from using, copying, altering, or disclosing the contents of this message. Aricent accepts no responsibility forloss or damage arising from the use of the information transmitted by this email including damage from virus."