I-D ACTION:draft-stiemerling-midcom-simco-05.txt (fwd)

Martin Stiemerling <[email protected]>
Newsgroups gmane.ietf.midcom
Message-ID <2147483647.1081249759@[10.1.1.109]>
Hi all,

Please find below the announcement for a new version of the MIDCOM-type 
protocol called SIMCO (SImple Middlebox COnfiguration) Protocol. This 
protocol implements all semantics defined in 
draft-ietf-midcom-semantics-07.txt in a binary encoding.

Regards,

  Martin

------------ Forwarded Message ------------
Date: Montag, 5. April 2004 10:41 Uhr -0400
From: [email protected]
To: [email protected]
Subject: I-D ACTION:draft-stiemerling-midcom-simco-05.txt

A New Internet-Draft is available from the on-line Internet-Drafts
directories.


	Title		: Simple Middlebox Configuration (SIMCO) Protocol
			  Version 3.0
	Author(s)	: M. Stiemerling, et al.
	Filename	: draft-stiemerling-midcom-simco-05.txt
	Pages		: 62
	Date		: 2004-4-2
	
This document describes a protocol for controlling middleboxes such
   as firewalls and network address translators.  It is a fully
   compliant implementation of the MIDCOM semantics described in
   [RFCXXXX].  Compared to earlier experimental versions of the SIMCO
   protocol, this version 3 uses binary message encodings in order to
   reduce resource requirements.

A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-stiemerling-midcom-simco-05.txt

To remove yourself from the I-D Announcement list, send a message to
[email protected] with the word unsubscribe in the body of the
message.   You can also visit
https://www1.ietf.org/mailman/listinfo/I-D-announce  to change your
subscription settings.


Internet-Drafts are also available by anonymous FTP. Login with the username
"anonymous" and a password of your e-mail address. After logging in,
type "cd internet-drafts" and then
	"get draft-stiemerling-midcom-simco-05.txt".

A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt


Internet-Drafts can also be obtained by e-mail.

Send a message to:
	[email protected].
In the body type:
	"FILE /internet-drafts/draft-stiemerling-midcom-simco-05.txt".
	
NOTE:	The mail server at ietf.org can return the document in
	MIME-encoded form by using the "mpack" utility.  To use this
	feature, insert the command "ENCODING mime" before the "FILE"
	command.  To decode the response(s), you will need "munpack" or
	a MIME-compliant mail reader.  Different MIME-compliant mail readers
	exhibit different behavior, especially when dealing with
	"multipart" MIME messages (i.e. documents which have been split
	up into multiple messages), so check your local documentation on
	how to manipulate these messages.
		
		
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.

---------- End Forwarded Message ----------
I-D ACTION:draft-stiemerling-midcom-simco-05.txt (message/rfc822, 4.8 KB)
Return-Path: <[email protected]>
X-Sieve: cmu-sieve 2.0
Received: from yamato.ccrle.nec.de (neptune.office [10.1.1.83])
	by venus.office (Postfix on SuSE Linux eMail Server 3.0) with ESMTP
	id 46C19104290; Mon,  5 Apr 2004 17:09:46 +0200 (CEST)
Received: from optimus.ietf.org (optimus22.ietf.org [132.151.6.22])
	by yamato.ccrle.nec.de (8.12.10/8.12.9) with ESMTP id i35F9hfl005030;
	Mon, 5 Apr 2004 17:09:44 +0200 (CEST)
Received: from localhost.localdomain ([127.0.0.1] helo=www1.ietf.org)
	by optimus.ietf.org with esmtp (Exim 4.20)
	id 1BAVJn-0003zq-AY; Mon, 05 Apr 2004 10:43:19 -0400
Received: from odin.ietf.org ([132.151.1.176] helo=ietf.org)
	by optimus.ietf.org with esmtp (Exim 4.20)
	id 1BAVI7-0003ju-RF
	for [email protected]; Mon, 05 Apr 2004 10:41:35 -0400
Received: from CNRI.Reston.VA.US (localhost [127.0.0.1])
	by ietf.org (8.9.1a/8.9.1a) with ESMTP id KAA04631
	for <[email protected]>; Mon, 5 Apr 2004 10:41:30 -0400 (EDT)
Message-Id: <[email protected]>
Mime-Version: 1.0
Content-Type: Multipart/Mixed; Boundary="NextPart"
To: [email protected]
From: [email protected]
Subject: I-D ACTION:draft-stiemerling-midcom-simco-05.txt
Date: Mon, 05 Apr 2004 10:41:29 -0400
Sender: [email protected]
Errors-To: [email protected]
X-BeenThere: [email protected]
X-Mailman-Version: 2.0.12
Precedence: bulk
Reply-To: [email protected]
List-Unsubscribe: <https://www.ietf.org/mailman/listinfo/i-d-announce>,
	<mailto:[email protected]?subject=unsubscribe>
List-Id: <i-d-announce.ietf.org>
List-Post: <mailto:[email protected]>
List-Help: <mailto:[email protected]?subject=help>
List-Subscribe: <https://www.ietf.org/mailman/listinfo/i-d-announce>,
	<mailto:[email protected]?subject=subscribe>
X-Scanned-By: MIMEDefang 2.35

--NextPart

A New Internet-Draft is available from the on-line Internet-Drafts directories.


	Title		: Simple Middlebox Configuration (SIMCO) Protocol 
			  Version 3.0
	Author(s)	: M. Stiemerling, et al.
	Filename	: draft-stiemerling-midcom-simco-05.txt
	Pages		: 62
	Date		: 2004-4-2
	
This document describes a protocol for controlling middleboxes such
   as firewalls and network address translators.  It is a fully
   compliant implementation of the MIDCOM semantics described in
   [RFCXXXX].  Compared to earlier experimental versions of the SIMCO
   protocol, this version 3 uses binary message encodings in order to
   reduce resource requirements.

A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-stiemerling-midcom-simco-05.txt

To remove yourself from the I-D Announcement list, send a message to 
[email protected] with the word unsubscribe in the body of the message.  
You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce 
to change your subscription settings.


Internet-Drafts are also available by anonymous FTP. Login with the username
"anonymous" and a password of your e-mail address. After logging in,
type "cd internet-drafts" and then
	"get draft-stiemerling-midcom-simco-05.txt".

A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html 
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt


Internet-Drafts can also be obtained by e-mail.

Send a message to:
	[email protected].
In the body type:
	"FILE /internet-drafts/draft-stiemerling-midcom-simco-05.txt".
	
NOTE:	The mail server at ietf.org can return the document in
	MIME-encoded form by using the "mpack" utility.  To use this
	feature, insert the command "ENCODING mime" before the "FILE"
	command.  To decode the response(s), you will need "munpack" or
	a MIME-compliant mail reader.  Different MIME-compliant mail readers
	exhibit different behavior, especially when dealing with
	"multipart" MIME messages (i.e. documents which have been split
	up into multiple messages), so check your local documentation on
	how to manipulate these messages.
		
		
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.

--NextPart
Content-Type: Multipart/Alternative; Boundary="OtherAccess"

--OtherAccess
Content-Type: Message/External-body;
	access-type="mail-server";
	server="[email protected]"

Content-Type: text/plain
Content-ID:	<[email protected]>

ENCODING mime
FILE /internet-drafts/draft-stiemerling-midcom-simco-05.txt

--OtherAccess
Content-Type: Message/External-body;
	name="draft-stiemerling-midcom-simco-05.txt";
	site="ftp.ietf.org";
	access-type="anon-ftp";
	directory="internet-drafts"

Content-Type: text/plain
Content-ID:	<[email protected]>

--OtherAccess--

--NextPart--



_______________________________________________
I-D-Announce mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/i-d-announce
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.