Re: ICMP Router Discovery
Greg Daley <[email protected]> Mon, 20 Oct 2003 09:49:53 +1000
| Newsgroups | gmane.ietf.mobileip |
|---|---|
| Organization | Monash University |
| Message-ID | <[email protected]> |
Hi Yohannes, We're using Linux boxes with (slightly modified) RADVD. Greg Yohannes wrote: > Hi Greg, > > Thanks for your help. My DUT is the MN. Do you know which Routers > support Mobile-ip Protocols? > > Yohannes > ----- Original Message ----- > From: "Greg Daley" <[email protected]> > To: "Yohannes" <[email protected]> > Cc: <[email protected]> > Sent: Thursday, October 16, 2003 7:24 PM > Subject: Re: [mobile-ip] ICMP Router Discovery > > > >>G'day Johannes, >> >>Yohannes wrote: >> >>>Hi all, >>> >>> I am trying to test ICMP Router Discovery protocol that I have >>>written. Is there a way to test if the implementation of the >>>protocol is functioning? If you can give me a hint on the scenario I >>>need to set up before I can test it. >> >>You'll need a host and a router for basic router >>discovery. >> >>If you're interested in movement detection/detecting >>network attachment, you'll need a couple of network >>segments with routers on them to switch between. >> >>Also, you may want to test multiple routers on one >>subnet with a common set of prefixes, or multiple >>routers on a subnet where the prefixes overlap, >>but aren't common, or multiple routers with >>disjoint prefixes on one link-instance. >> >>I'm not sure which device is your DUT, (I'm >>guessing the MN) but I'd guess that there >>are conformance test tools (TAHI? UNH?) which >>cover this stuff. >> >>Greg Daley >> >> >> > > >