Re: Clarification required

--------------090500040404020005030307
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit

Rajiv,

        My query continues below:

Rajiv Raghunarayan wrote:

>Hi Sam,
>
>The natConfAddrMapTable only represents the NAT configuration. The entry
>
If the natConfAddrMapTable only represents the existing configuration, 
doesn't this mean that the entire table will be a read-only table. (i.e) 
there would not be the possibility for a row to be added or deleted. But 
this seems difficult to follow. Can you please describe how a typical 
mapping would be added statically and the result on the different 
configuration table. Should not the configuration tables be used for 
configuring NAT.

Here is a scenario I could describe:

This table can be used to create a range of Addrmap by specifying the 
bare minimum information required; viz the Range of Local, Global, 
Ports, Protocol. following these inputs the static mappings over the 
range could be created.


>
>in the Bind tables is created either 'statically' or 'dynamically', and
>this property is represented by natConfMapEntryType.
>
>Hope this clarifies.
>
>-Rajiv.
>
>On Fri, 29 Nov 2002, Sam K. Sankoorikal wrote:
>
>>Hi Rajiv,
>>
>>        There is a clarification in the NAT-MIB which I need. Should not
>>the natConfMapEntryType be read-only? If the row of  natConfAddrMapTable
>>is created by SNMP then the row is Static; however if the row is created
>>by the NAT protocol dynamically then the entry is dynamic. It is not
>>possible to set the value to dynamic and create the entry. Please let me
>>know your opinion.
>>
>>Thanks and Regards,
>>Sam.
>>--
>>  Sam K. Sankoorikal.
>>  Home Net Solutions <http://www.wipro.com/homenet> ,
>>  Wipro Technologies <http://www.wipro.com>
>>  Ganapa Complex,
>>  #53/1 Hosur Rd Madivala,
>>  Bangalore, India 560068
>>  PBX:     +91 80 5502001 extn 3114
>>  [email protected]
>>
>>
>>
>>
>
>


-- 
  Sam K. Sankoorikal.
  Home Net Solutions <http://www.wipro.com/homenet> ,
  Wipro Technologies <http://www.wipro.com>
  Ganapa Complex,
  #53/1 Hosur Rd Madivala,
  Bangalore, India 560068
  PBX:     +91 80 5502001 extn 3114
  [email protected]




--------------090500040404020005030307--