Re: Trouble with VSCs

Hi John,
The guy who specializes in the VSC here would like you to try out the
latest drop and see if you have the same problems. The VSC code has come a
long way.
     Mez





"Samanick, John" <[email protected]>@imc.org on 02/24/99 03:40:37 PM

Sent by:  [email protected]


To:   "'[email protected]'" <[email protected]>
cc:

Subject:  Trouble with VSCs



Hello Everyone

I'm having a bit of trouble getting the Jonah RI fully operational due to
problems generating the required VSCs. I had gone thru the sequence
initially with the CA, RA, EE and thought I had generated the VSCs for all.
In subsequent configuration work, I found that only the CA VSC (the first
one generated) had valid data within. The other two had gibberish. Deleting
all 3 files, I tryed again this time getting a system error message
paraphrased below:

"Instruction at 0x015b12b7 referenced memory at 0x015b12b7, memory could
not
be read"

Obviously not a good thing for an instruction to reference its own
location.

This is occurring towards the end of the VSC generation process after the
message "PKCSMSM - DLL_PROCESS_DETACH". The system error only occurs when
scinit is used with either the 'C' or 'R' argument. Used without the
argument, scinit runs its course, but the resulting .fil contains only
gibberish.

Anyone have any ideas what went wrong?


Thanks for any help.


John Samanick
Computer Scientist
DoD Defense Information Systems Agency