RE: Questions about draft-stokes-vkompella-ppvpn-hvpls-oam-01.txt
Olen Stokes <[email protected]> Tue, 20 May 2003 14:47:31 -0700
| Newsgroups | gmane.ietf.ppvpn |
|---|---|
| Message-ID | <82F679A6A377F84B8F665D8F90D12B8DD8F35A__34948.3629841872$1053468665@sc-msexch-05.extremenetworks.com> |
It was simply set up that way to allow for future flexibility. Cheers, Olen > -----Original Message----- > From: lidefeng [mailto:[email protected]] > Sent: Monday, May 19, 2003 10:02 PM > To: [email protected] > Cc: [email protected]; [email protected] > Subject: Questions about draft-stokes-vkompella-ppvpn-hvpls-oam-01.txt > > > Some questions about draft-stokes-vkompella-ppvpn-hvpls-oam-01.txt > > In 8.1.1 Hierarchical L2 Circuit FEC Stack Sub-Type ,there are > "Encapsulation Type" field and " L2 specific Sub-TLV > (Optional)" field in > the proposed Hierarchical L2 Circuit,while,in the "L2 > specific Sub-TLV > (Optional)" field, there is "Type (0x000B)" field in it,I want to know > what's the difference between the "Encapsulation Type" in the > Hierarchical > L2 Circuit and the "Type" in "L2 specific Sub-TLV (Optional)" > ? If they are > both used,isn't one of them is redundant? Isn't reasonable > use only one of > them? > > The relevant format is copied to the following. > > Hierarchical L2 Circuit: > 0 1 2 3 > 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 > > +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ > | VC ID > | > > +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ > | Encapsulation Type | Must Be Zero > | > > +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ > | L2 specific Sub-TLV (Optional) > | > > +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ > > L2 specific Sub-TLV : > 0 1 2 3 > 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 > > +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ > | Type (0x000B) | Length > | > > +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ > | Target Ethernet MAC address > | > > +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ > | | 802.1Q Tag > | > > +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ > | Sender Ethernet MAC address > | > > +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ > | | 802.1Q Tag > | > > +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ > > > >