Wrong Message Length Field.

Aditya <[email protected]>
Newsgroups gmane.ietf.sigtran
Message-ID <[email protected]>
Hi all,
If a M3ua Peer receive a M3UA message with message length (in Header) less than the actual length (but a multiple of 4) [say for example; ASP Active Ack message received with Length in the Header field as 8; whereas the actual length is 16.]; then does RFC 3332 mandate sending an error message. The missing 8 bytes are not padding bytes (can't be). 

My question is also for the reverse case : actual message len is 8 but the length field in the header specify it as 16.

All I could find was 

Section 3.8.1
   The "Parameter Field Error" would be sent if a message is received
   with a parameter having a wrong length field.


but this talks about "parameter" and not the header.

Appreciate your help,

Aditya


---------------------------------------------------------------------------X----------------------------------------------------
 
Don't take life too seriously...
Nobody comes out alive anyway




 		
---------------------------------
How low will we go? Check out Yahoo! Messenger’s low  PC-to-Phone call rates.

_______________________________________________
Sigtran mailing list
[email protected]
https://www1.ietf.org/mailman/listinfo/sigtran
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.