Re: [M3UA]Broadcast Mode in M3UA

A case would be to propagate Destination Unavailable message for a
particular SS7 destination to all the ACTIVE ASP's of an AS in Broadcast
mode. And as for handling of duplicate messages I think it will be taken
care by SCTP.

Thanks
aamir
 

-----Original Message-----
From: Kuldeep Janjua [mailto:[email protected]] 
Sent: Tuesday, July 07, 2009 6:21 PM
To: Khan, Amir [NETPWR/INDIA/HYDE]
Cc: [email protected]; [email protected]
Subject: Re: [Sigtran] [M3UA]Broadcast Mode in M3UA

Hi Amir,

But Why would I require all ASPs to process the same message, can you
give some practical example, and in that case how to ensure that only
one single message should be delivered to the user not the duplicate
copies.M3UA rfc does not talk about handling duplicated messages as
such.

Regards,
Kuldeep

On 7/7/09, [email protected] <[email protected]> wrote:
>
> Hi Kuldeep
>
> In a AS there can be multiple ACTIVE ASP's, but not all ACTIVE ASP's 
> might be processing the incoming traffic for that AS (Loadsharing or 
> Override mode) but if you want all the ACTIVE ASP's for that AS to 
> process the traffic you need to set the AS in Broadcast mode.
>
> Thanks
> aamir
>
>
> -----Original Message-----
> From: [email protected] [mailto:[email protected]] On 
> Behalf Of Kuldeep Janjua
> Sent: Tuesday, July 07, 2009 5:23 PM
> To: [email protected]; [email protected]
> Subject: [Sigtran] [M3UA]Broadcast Mode in M3UA
>
> Hi All,
>
> Why do we require BroadCast Mode in M3UA ? What is the practical 
> scenario when AS at M3UA will be configured in BroadCast Mode. What 
> exactly is the meaning of configuring local AS in BroadCast mode.
>
> Thanks,
> Kuldeep
> _______________________________________________
> Sigtran mailing list
> [email protected]
> https://www.ietf.org/mailman/listinfo/sigtran
>