Re: Stupid question on flow use in outbound

Hi, 

>>It doesn't have to be a B2BUA. It can be any kind of "gate control
node"
>>which will not allow media to pass unless there is an associated SIP
session.
>
>then it is the problem with that "gate control node".  of course, it
must be possible to use different ip address for sip and media.

I was referring to the case when signalling and media is transported on
completely different access networks, via different B2BUA/gates/etc.

If signalling and media is transported on the same access networks, they
can in many cases have different IP address and/or port.

Regards,

Christer

_______________________________________________
Sip mailing list  https://www.ietf.org/mailman/listinfo/sip
This list is for NEW development of the core SIP Protocol
Use [email protected] for questions on current sip
Use [email protected] for new developments on the application of sip