Re: rfc3261: default contact q-value

Thanks for the responses, especially the reference to RFC 3841.

I guess the working group agreed to remove it from being "0.5" (or documented within the rfc2543bis) when creating draft-ietf-sip-rfc2543bis-05 and agreed to start documenting it as "1.0" within draft-ietf-sip-callerprefs-06.

Including the default value for "q" within the base specification sounds better to me; however documenting the default within RFC 3841 (or non SIP RFCs as some have indicated) might be adequate.


> -----Original Message-----
> From: [email protected] [mailto:[email protected]] On Behalf Of
> Brett Tate
> Sent: Wednesday, February 11, 2009 7:00 PM
> To: SIP
> Subject: [Sip] rfc3261: default contact q-value
> 
> Greetings,
> 
> Within RFC 3261, I was unable to find a default q-value for Contact.
> 
> Versions 2 through 4 of draft-ietf-sip-rfc2543bis indicated 0.5 as
> default.  It looks like it was unintentionally removed; however I'm not
> certain.
> 
> What is the default Contact q-value and where is it documented?
> 
> Thanks,
> Brett
> 

_______________________________________________
Sip mailing list  https://www.ietf.org/mailman/listinfo/sip
This list is for NEW development of the core SIP Protocol
Use [email protected] for questions on current sip
Use [email protected] for new developments on the application of sip