Re: [saag] [Fwd: I-D ACTION:draft-turner-md2-to-historic-00.txt]

"Santosh Chokhani" <[email protected]>
Newsgroups gmane.ietf.x509,gmane.ietf.saag,gmane.ietf.smime,gmane.ietf.irtf.cfrg
Message-ID <[email protected]>
Sean,

It may be worth discussing DSSC (RFC 5698) from LTANS WG that provides a
capability to specify suitable crypto algorithms.

> -----Original Message-----
> From: [email protected] [mailto:[email protected]] On Behalf
Of
> Sean Turner
> Sent: Tuesday, July 06, 2010 12:40 PM
> To: [email protected]; [email protected]; [email protected]; [email protected]
> Subject: Re: [saag] [Fwd: I-D ACTION:draft-turner-md2-to-historic-
> 00.txt]
> 
> To summarize the comments I received on this I-D:
> 
> 1) Finally!
> 
> 2) Is there any precedent with moving informational to historic.
> 
> Russ suggested I ask Scott Bradner what he thought about this.  His
> response (repeated here with permission):
> 
> "1/ my personal view is that historic should be only used for
>   cases where we want to say 'do not use'
> 
>   2/ seems like a reasonable thing to do in this case
> 
>   fwiw, I have always felt that it is important to document
>   any such move that is done for a real reason (not just because
>   people think it is not used) with a RFC"
> 
> I'd consider this support for moving informational RFCs to historic.
> 
> 3) Why target MD2?
> 
> This was really a trial balloon.  I'm planning on doing something with
> MD4 and MD5 too ;)
> 
> 4) It's better to have a security algorithms roadmap.
> 
> I tend to agree, but I thought I was shooting for the low hanging
> fruit.
> 
> 5) Remove keywords and delete obsolete references.
> 
> Anything to track less references is a good thing!
> 
> 6) Do an updates document instead, because there might still be other
> uses for MD2/MD4/MD5 that don't require collision resistance (e.g.,
> HMAC).
> 
> I'd like to treat MD2/MD4/MD5 the same, but some HMAC uses are
> probably still okay for a little while (at least that what's I'm
> turning up through research). But, I can't really see us saying that
> HAMC-MD2 and HMAC-MD4 are okay to keep using in the mid/long term.  I
> think we ought to be saying "jump off the sinking ship now" because it
> takes a while for crypto to go away just like it does to get fielded.
>   Luckily, there are only a few places where HMAC-MD2 or HMAC-MD4 are
> specified.  MD5/HMAC-MD5 is another story.  I like the idea of just
> updating MD5's security considerations to say don't use MD5 if you
> need collision resistance and that it is (or is probably) okay for
> HMAC.
> 
> I updated the md2-to-historic I-D
> (http://datatracker.ietf.org/doc/draft-turner-md2-to-historic/) to
> actually talk about attacks against MD2 and submitted a similar draft
> for MD4 (http://datatracker.ietf.org/doc/draft-turner-md4-to-
> historic/).
>   I also submitted one that updates the MD5 security considerations
> (http://datatracker.ietf.org/doc/draft-turner-md5-seccon-update/).
> Comments on all are welcome.
> 
> spt
> 
> Sean Turner wrote:
> > (apologies if you get this multiple times)
> >
> > I'm looking for feedback on this draft that proposes moving MD2 to
> > historic status.
> >
> > Thanks,
> >
> > spt
> >
> >
---------------------------------------------------------------------
> ---
> >
> > Subject:
> > I-D ACTION:draft-turner-md2-to-historic-00.txt
> > From:
> > [email protected]
> > Date:
> > Wed, 9 Jun 2010 15:00:02 -0700 (PDT)
> > To:
> > [email protected]
> >
> > To:
> > [email protected]
> >
> >
> > A New Internet-Draft is available from the on-line Internet-Drafts
> > directories.
> >
> >
> > 	Title		: MD2 to Historic Status
> > 	Author(s)	: S. Turner
> > 	Filename	: draft-turner-md2-to-historic-00.txt
> > 	Pages		: 6
> > 	Date		: 2010-6-8
> >
> >    This document recommends the retirement of MD2 and discusses the
> >    reasons for doing so.  This document recommends RFC 1319 be moved
> to
> >    Historic status.
> >
> >
> > A URL for this Internet-Draft is:
> > http://www.ietf.org/internet-drafts/draft-turner-md2-to-historic-
> 00.txt
> >
> > Internet-Drafts are also available by anonymous FTP at:
> > ftp://ftp.ietf.org/internet-drafts/
> >
> > Below is the data which will enable a MIME compliant mail reader
> > implementation to automatically retrieve the ASCII version of the
> > Internet-Draft.
> >
> >
> >
---------------------------------------------------------------------
> ---
> >
> > _______________________________________________
> > I-D-Announce mailing list
> > [email protected]
> > https://www.ietf.org/mailman/listinfo/i-d-announce
> > Internet-Draft directories: http://www.ietf.org/shadow.html
> > or ftp://ftp.ietf.org/ietf/1shadow-sites.txt
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> _______________________________________________
> saag mailing list
> [email protected]
> https://www.ietf.org/mailman/listinfo/saag
_______________________________________________
pkix mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/pkix
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.