I-D ACTION:draft-ietf-udlr-dvmrp-conf-03.txt

--0__=OfSbdFtXjQuMjFESaQ1YvA4KNxW9wpARBjrWOBRMTl7GlncxoFnnBJf0
Content-type: text/plain; charset=iso-8859-1
Content-Disposition: inline
Content-transfer-encoding: quoted-printable



Hello,

We have submitted a new version of the draft "Configuration of DVMRP v3=
 over a
UniDirectional Link".

The main changes are
* Addition of a section about the DVMRPv3 implementation used in our ex=
periment
(section 2.2) : mrouted 3.9b3 on freeBSD3.4-RELEASE.
* In the section about the passive mode on receiver (section 2.4 et 2.4=
.2): we
explained that a new paramater has to be added to the standard implemen=
tation.
* The section 2.5 is renamed "when and how to switch between the active=
 and
passive mode" : the first part describes when it is necessary to switch=
 the
receiver from passive to active and the second part describes how it mu=
st be
done.
* In the section 3.1 "Application using a Reliable Multicast Transport =
Protocol"
we added that NACK messages are sent in multicast.
* in section 4.0 : an introduction is added to explain the two suggeste=
d network
architecture:
The first one (a receiver on the same lan as the feed) enables an opera=
tor of a
UDL link to have an active receiver under its control,
The second one (the feed and a receiver have an access to the Mbone) ex=
plains
how to configure this receiver to send multicast message through the Mb=
one
instead of using the GRE tunnel.

Moreover we changed the abstract and the introduction to explain that w=
e propose
a configuration of DVMRP more adapted to a UniDirectional Link.

Do not hesitate to ask questions or send comments on this draft.

C=E9line


---------------------- Envoy=E9 par Celine Benassy/ALCATEL-SPACE le 01/=
07/2002
14:49 ---------------------------


[email protected] on 01/07/2002 12:39:07

Veuillez r=E9pondre =E0 [email protected]

Pour :    IETF-Announce: ;
cc :  [email protected] (ccc : Celine Benassy/ALCATEL-SPACE)
Objet :   I-D ACTION:draft-ietf-udlr-dvmrp-conf-03.txt


=

--0__=OfSbdFtXjQuMjFESaQ1YvA4KNxW9wpARBjrWOBRMTl7GlncxoFnnBJf0
Content-type: text/plain; charset=us-ascii
Content-Disposition: inline


A New Internet-Draft is available from the on-line Internet-Drafts directories.
This draft is a work item of the UniDirectional Link Routing Working Group of
the IETF.

     Title          : Configuration of DVMRP over a UniDirectional Link
     Author(s) : C. Benassy-Foch, P. Charron, Y. Guinamand
     Filename  : draft-ietf-udlr-dvmrp-conf-03.txt
     Pages          : 14
     Date      : 28-Jun-02

Routers connected to a UniDirectional Link (UDL) such as a
satellite network, implement a link layer tunneling mechanism, as
defined in the RFC 3077 [UDLR]. These routers could exchange
multicast routing information. This document describes how DVMRPv3
works on this network architecture and suggests a different
configuration of DVMRPv3 on routers connected to the UDL more
adapted and optimized to this network architecture.

A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-ietf-udlr-dvmrp-conf-03.txt

To remove yourself from the IETF Announcement list, send a message to
ietf-announce-request with the word unsubscribe in the body of the message.

Internet-Drafts are also available by anonymous FTP. Login with the username
"anonymous" and a password of your e-mail address. After logging in,
type "cd internet-drafts" and then
     "get draft-ietf-udlr-dvmrp-conf-03.txt".

A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt


Internet-Drafts can also be obtained by e-mail.

Send a message to:
     [email protected].
In the body type:
     "FILE /internet-drafts/draft-ietf-udlr-dvmrp-conf-03.txt".

NOTE:     The mail server at ietf.org can return the document in
     MIME-encoded form by using the "mpack" utility.  To use this
     feature, insert the command "ENCODING mime" before the "FILE"
     command.  To decode the response(s), you will need "munpack" or
     a MIME-compliant mail reader.  Different MIME-compliant mail readers
     exhibit different behavior, especially when dealing with
     "multipart" MIME messages (i.e. documents which have been split
     up into multiple messages), so check your local documentation on
     how to manipulate these messages.


Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.

mailto:[email protected]
ftp://ftp.ietf.org/internet-drafts/draft-ietf-udlr-dvmrp-conf-03.txt




      ALCATEL SPACE INDUSTRIES
      DSR/RE/A Network Engineer
      Tel : (33) 5 34 35 39 34  /  Fax : (33) 5 34 35 65 06
      E-Mail : [email protected]

--0__=OfSbdFtXjQuMjFESaQ1YvA4KNxW9wpARBjrWOBRMTl7GlncxoFnnBJf0--