[ACPI-sppt] Problems with ACPI on SiS-powered laptop

Hi!

I'm having difficulties with ACPI on my laptop; here's the excerpt from
dmesg that is relevant to ACPI:

 BIOS-e820: 000000000dff0000 - 000000000dffffc0 (ACPI data)
 BIOS-e820: 000000000dffffc0 - 000000000e000000 (ACPI NVS)
ACPI: have wakeup address 0xc0001000
ACPI: RSDP (v000 OID_00                                    ) @ 0x000e5010
ACPI: RSDT (v001 INSYDE RSDT_000 0x00000001 =90& 0x00010007) @ 0x0dfffbc0
ACPI: FADT (v001 INSYDE FACP_000 0x00000100 =90& 0x00010007) @ 0x0dfffac0
ACPI: BOOT (v001 INSYDE ISC_BOOT 0x00000100 =90& 0x00010007) @ 0x0dfffb50
ACPI: DBGP (v001 INSYDE DBGP_000 0x00000001 =90& 0x00010007) @ 0x0dfffb80
ACPI: DSDT (v001 INSYDE     8575 0x00001002 INTL 0x02002025) @ 0x00000000
ACPI: Subsystem revision 20040116
ACPI: IRQ9 SCI: Edge set to Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S3 S4 (swsusp) S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC0] (gpe 25)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11)
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 6
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
PCI: Using ACPI for IRQ routing
ACPI: Processor [CPU0] (supports C1, 8 throttling states)
ACPI: AC Adapter [AC] (on-line)
    ACPI-0352: *** Error: Looking up [ACST] in namespace, AE_NOT_FOUND
    ACPI-1120: *** Error: Method execution failed [\_SB_.BAT0._BTP] (Node c=
df39500), AE_NOT_FOUND
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SBTN]
ACPI: Lid Switch [LID]

Shutting the machine down works, but restarting hangs it; I already
reported this problem awhile ago (along with acpi dump). Any idea how (and
if at all) to get rid of this problem?

I'm running kernel 2.4.24 along with ACPI patch 20040116.

Thanks,

Andrej


-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn