Re: [ACPI-sppt] Re: Problems with ASUS M2400N
Bernhard Sadlowski <[email protected]>
| Newsgroups | gmane.linux.acpi.support |
|---|---|
| Message-ID | <[email protected]> |
On 02 Jul 2003 01:12, Rainer M. <[email protected]> wrote: > > However, if the AC power is plugged in when the notebook is started, > > the CPU is running at 1300MHz but the harddisk is very slow (~2 MB) - > > and yes, DMA etc. is turned on (at least hdparm says so). > > I'm using the same machine and had the very same problem (harddisk gets slow > despite dma and there's a process "keventd" taking 100% cpu performance). > I'm using gentoo kernel 2.4.20 with acpi patch from 2002???? (so it's not the > most recent one). > > The problem occured when I had all acpi features compiled into my kernel (i.e. > ). > But when only compiling ac-adapter, battery and cpu support, this phenomenon > does not occur any longer. So I suppose the reason is to be sought within the > other modules, wich I did not try. > > But I think for most users, these three modules suffice to use your laptop > normally. If not, just try to gradually add the other's one by one and look > whether things keep working well...... This did not work for me. Could you send me your .config for 2.4.21 + acpi-20030619-2.4.21? asus:/usr/src/linux# egrep -i 'acpi|apm' .config # CONFIG_HOTPLUG_PCI_ACPI is not set # CONFIG_APM is not set # ACPI Support CONFIG_ACPI=y # CONFIG_ACPI_HT_ONLY is not set CONFIG_ACPI_BOOT=y CONFIG_ACPI_BUS=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_SYSTEM=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y # CONFIG_ACPI_BUTTON is not set # CONFIG_ACPI_FAN is not set CONFIG_ACPI_PROCESSOR=y # CONFIG_ACPI_THERMAL is not set # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_TOSHIBA is not set # CONFIG_ACPI_DEBUG is not set From "make menuconfig": [*] ACPI Support [ ] CPU Enumeration Only <*> AC Adapter <*> Battery < > Button < > Fan <*> Processor < > Thermal Zone < > ASUS Laptop Extras < > Toshiba Laptop Extras [ ] Debug Statements asus:~# hdparm -tT /dev/hda /dev/hda: Timing buffer-cache reads: 128 MB in 0.92 seconds =139.13 MB/sec Timing buffered disk reads: 64 MB in 23.06 seconds = 2.78 MB/sec /etc/lilo.conf: image=/vmlinuz-2.4.21-p2 label=LinuxP2 initrd=/initrd.img-2.4.21-p2 read-only Bernhard ------------------------------------------------------- This SF.Net email sponsored by: Free pre-built ASP.NET sites including Data Reports, E-commerce, Portals, and Forums are available now. Download today and enter to win an XBOX or Visual Studio .NET. http://aspnet.click-url.com/go/psa00100006ave/direct;at.asp_061203_01/01