[ACPI-sppt] Asus A7N8X and Wake up on Lan

Hi everyone,

I recently bought a A7N8X motherboard with integrated LAN functionality.

I want to be able to use the Wake-on-Lan functions of the Motherboard.
From all the docs I've read I understand that the way of powering down is 
essential to this function.

My machine is a dual boot (Windows and Gentoo Linux).
If I shutdown the machine from Windows, the Wake up function works properly, 
but from Linux, nothing happens.
So I guess Linux shuts the system down improperly for Wake on Lan.

Anyone knows what I should do?

Here's the output from dmesg: 
( I noticed the ACPI errors, but I don't know what to do about it...)

Thanks for your input!

Elton

Linux version 2.4.20-gentoo-r5 (root@cdimage) (gcc version 3.2.3 20030422 
(Gentoo Linux 1.4 3.2.3-r1, propolice)) #4 Sun Aug 3 18:29:11 CEST 2003
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
 BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
 BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 Nvidia                     ) @ 0x000f75c0
ACPI: RSDT (v001 Nvidia AWRDACPI 16944.11825) @ 0x1fff3000
ACPI: FADT (v001 Nvidia AWRDACPI 16944.11825) @ 0x1fff3040
ACPI: MADT (v001 Nvidia AWRDACPI 16944.11825) @ 0x1fff74c0
ACPI: DSDT (v001 NVIDIA AWRDACPI 00000.04096) @ 0x00000000
ACPI: BIOS passes blacklist
Kernel command line: auto BOOT_IMAGE=Gentoo ro root=307 hdc=ide-scsi
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 2171.423 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 4292.60 BogoMIPS
Memory: 512068k/524224k available (1884k kernel code, 9592k reserved, -2212k 
data, 132k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
Proc Config support by [email protected]
proc config counted 2329 bytes in names
proc config counted 265 bytes in value handles
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU:             Common caps: 0383fbff c1c3fbff 00000000 00000000
CPU: AMD Athlon(tm) XP 3000+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([email protected])
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20021122
PCI: PCI BIOS revision 2.10 entry at 0xfb4a0, last bus=2
PCI: Using configuration type 1
    ACPI-0511: *** Info: GPE Block0 defined as GPE0 to GPE31
    ACPI-0511: *** Info: GPE Block1 defined as GPE32 to GPE95
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S3 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [LSMB] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [APC1] (IRQs 16, disabled)
ACPI: PCI Interrupt Link [APC2] (IRQs 17, disabled)
ACPI: PCI Interrupt Link [APC3] (IRQs 18, disabled)
ACPI: PCI Interrupt Link [APC4] (IRQs *19)
ACPI: PCI Interrupt Link [APC5] (IRQs 16, disabled)
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22, disabled)
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22, disabled)
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22, disabled)
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22, disabled)
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22, disabled)
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22, disabled)
ACPI: PCI Interrupt Link [APCS] (IRQs *23)
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22, disabled)
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22, disabled)
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22, disabled)
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22, disabled)
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 10
ACPI: PCI Interrupt Link [LAPU] enabled at IRQ 5
ACPI: PCI Interrupt Link [LMCI] enabled at IRQ 11
ACPI: PCI Interrupt Link [LFIR] enabled at IRQ 10
ACPI: PCI Interrupt Link [L3CM] enabled at IRQ 5
ACPI: PCI Interrupt Link [LIDE] enabled at IRQ 11
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
    ACPI-1103: *** Error: Method execution failed, AE_AML_BUFFER_LIMIT
    ACPI-1103: *** Error: Method execution failed, AE_AML_BUFFER_LIMIT
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 0
    ACPI-1103: *** Error: Method execution failed, AE_AML_BUFFER_LIMIT
    ACPI-1103: *** Error: Method execution failed, AE_AML_BUFFER_LIMIT
ACPI: PCI Interrupt Link [APCG] enabled at IRQ 0
    ACPI-1103: *** Error: Method execution failed, AE_AML_BUFFER_LIMIT
    ACPI-1103: *** Error: Method execution failed, AE_AML_BUFFER_LIMIT
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 0
    ACPI-1103: *** Error: Method execution failed, AE_AML_BUFFER_LIMIT
    ACPI-1103: *** Error: Method execution failed, AE_AML_BUFFER_LIMIT
ACPI: PCI Interrupt Link [APCI] enabled at IRQ 0
    ACPI-1103: *** Error: Method execution failed, AE_AML_BUFFER_LIMIT
    ACPI-1103: *** Error: Method execution failed, AE_AML_BUFFER_LIMIT
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 0
    ACPI-1103: *** Error: Method execution failed, AE_AML_BUFFER_LIMIT
    ACPI-1103: *** Error: Method execution failed, AE_AML_BUFFER_LIMIT
ACPI: PCI Interrupt Link [APCK] enabled at IRQ 0
    ACPI-1103: *** Error: Method execution failed, AE_AML_BUFFER_LIMIT
    ACPI-1103: *** Error: Method execution failed, AE_AML_BUFFER_LIMIT
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 0
    ACPI-1103: *** Error: Method execution failed, AE_AML_BUFFER_LIMIT
    ACPI-1103: *** Error: Method execution failed, AE_AML_BUFFER_LIMIT
ACPI: PCI Interrupt Link [APCM] enabled at IRQ 0
    ACPI-1103: *** Error: Method execution failed, AE_AML_BUFFER_LIMIT
    ACPI-1103: *** Error: Method execution failed, AE_AML_BUFFER_LIMIT
ACPI: PCI Interrupt Link [AP3C] enabled at IRQ 0
    ACPI-1103: *** Error: Method execution failed, AE_AML_BUFFER_LIMIT
    ACPI-1103: *** Error: Method execution failed, AE_AML_BUFFER_LIMIT
ACPI: PCI Interrupt Link [APCZ] enabled at IRQ 0
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 
'acpi=off'
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
IA-32 Microcode Update Driver: v1.11 <[email protected]>
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch ([email protected])
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 [email protected]).
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI 
ISAPNP enabled
Real Time Clock Driver v1.10e
Non-volatile memory driver v1.2
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller on PCI bus 00 dev 48
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
AMD_IDE: Bios didn't set cable bits corectly. Enabling workaround.
AMD_IDE: PCI device 10de:0065 (nVidia Corporation) (rev a2) UDMA100 controller 
on pci00:09.0
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 6Y080P0, ATA DISK drive
hdc: PCRW804, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c017a524, I/O limit 4095Mb (mask 0xffffffff)
hda: 160086528 sectors (81964 MB) w/7936KiB Cache, CHS=9964/255/63, UDMA(100)
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 p9 >
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: unsupported bridge
agpgart: no supported devices found.
[drm:drm_init] *ERROR* Cannot initialize the agpgart module.
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
es1371: version v0.30 time 18:30:50 Aug  3 2003
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 132k freed
Adding Swap: 594364k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal
PCI: Setting latency timer of device 00:04.0 to 64
nvnet: selecting duplex setting as auto duplex mode.
nvnet: selecting speed settings as auto-negotiation.
nvnet: Optimizing driver for CPU
reiserfs: checking transaction log (device 03:06) ...
Using r5 hash to sort names
ReiserFS version 3.6.25



-------------------------------------------------------
This SF.Net email sponsored by: Free pre-built ASP.NET sites including
Data Reports, E-commerce, Portals, and Forums are available now.
Download today and enter to win an XBOX or Visual Studio .NET.
http://aspnet.click-url.com/go/psa00100003ave/direct;at.aspnet_072303_01/01