Re: [ACPI-sppt] [Q] M2N : DSDT : unable to use a tweak my own DSDT or a provided one

oli <[email protected]> 15 Aug 2003 16:01:47 +0200
Newsgroups	gmane.linux.acpi.support
Message-ID	<[email protected]>
Mads Paulin <[email protected]> writes:

> Hi,
> 
> Have you tried compiling the DSDT with the -on option for iasl ??
> 
> I have and M2400N laptop and acpi works (not 100% but better than yours
> :-) ) 
> 
> Mads
> 


May I ask you somme questions :

Did you use the initrd technics or include de dsdt in the kernel ?

What distrib of linux did you use ?

What kernel version ?

Did you use your own modified dsdt or the custom one provided by the
dsdt database ?

Did you succeed to get the internal modem to work ? (which possibly
has nothing to do with the ACPI ... but tht's not sure to me)

Thanx in advance for your answers ?



> 
> On Fri, 2003-08-15 at 10:09, oli wrote:
> > 
> > Hi !
> > 
> > I have a M2N with a linux 2.4.22 (under distrib mdk9.1-cooker) !
> > 
> > Without doing anything I have the kevent overload Pb, has anybody with
> > such a laptop may have without tweaking his dsdt.
> > 
> > So a tried to use my own DSDT table.
> > 
> > *  I first tried to use the custum one available on the repository of
> > acpi4linux
> > 
> > http://acpi.sourceforge.net/dsdt/tables/ASUS/M2400N/ASUS-M2400N-0206-custom.asl.gz
> > 
> > I recompile this dsdt table ... put the .hex file for inclusion the kernel
> > I recompile the kernel 2.4.22 with the TWEAK-DSTD option on.
> > 
> > But  the result is that it seems that this dsdt is not understood by
> > the kernel.
> > 
> > dmesg gives this output :
> > 
> >     ACPI-0292: *** Info: Table [DSDT] replaced by host OS
> >     ACPI-1121: *** Error: Method execution failed [\_SB_.LNKA._STA] (Node cf6b6e20), AE_AML_REGION_LIMIT
> >     ACPI-0098: *** Error: Method execution failed [\_SB_.LNKA._STA] (Node cf6b6e20), AE_AML_REGION_LIMIT
> >     ACPI-1121: *** Error: Method execution failed [\_SB_.LNKB._STA] (Node cf6b6f20), AE_AML_REGION_LIMIT
> >     ACPI-0098: *** Error: Method execution failed [\_SB_.LNKB._STA] (Node cf6b6f20), AE_AML_REGION_LIMIT
> >     ACPI-1121: *** Error: Method execution failed [\_SB_.LNKC._STA] (Node cf6b4200), AE_AML_REGION_LIMIT
> >     ACPI-0098: *** Error: Method execution failed [\_SB_.LNKC._STA] (Node cf6b4200), AE_AML_REGION_LIMIT
> >     ACPI-1121: *** Error: Method execution failed [\_SB_.LNKD._STA] (Node cf6b4300), AE_AML_REGION_LIMIT
> >     ACPI-0098: *** Error: Method execution failed [\_SB_.LNKD._STA] (Node cf6b4300), AE_AML_REGION_LIMIT
> >     ACPI-1121: *** Error: Method execution failed [\_SB_.LNKE._STA] (Node cf6b4400), AE_AML_REGION_LIMIT
> >     ACPI-0098: *** Error: Method execution failed [\_SB_.LNKE._STA] (Node cf6b4400), AE_AML_REGION_LIMIT
> >     ACPI-1121: *** Error: Method execution failed [\_SB_.LNKF._STA] (Node cf6b4500), AE_AML_REGION_LIMIT
> >     ACPI-0098: *** Error: Method execution failed [\_SB_.LNKF._STA] (Node cf6b4500), AE_AML_REGION_LIMIT
> >     ACPI-1121: *** Error: Method execution failed [\_SB_.LNKG._STA] (Node cf6b4600), AE_AML_REGION_LIMIT
> >     ACPI-0098: *** Error: Method execution failed [\_SB_.LNKG._STA] (Node cf6b4600), AE_AML_REGION_LIMIT
> >     ACPI-1121: *** Error: Method execution failed [\_SB_.LNKH._STA] (Node cf6b4700), AE_AML_REGION_LIMIT
> >     ACPI-0098: *** Error: Method execution failed [\_SB_.LNKH._STA] (Node cf6b4700), AE_AML_REGION_LIMIT
> > ACPI: Interpreter enabled
> > ACPI: Using PIC for interrupt routing
> > ACPI: System [ACPI] (supports S0 S1 S3 (swsusp) S4 S5)
> > ACPI: PCI Root Bridge [PCI0] (00:00)
> > PCI: Probing PCI hardware (bus 00)
> > PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
> > Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge
> > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
> > ACPI: Embedded Controller [EC0] (gpe 28)
> > schedule_task(): keventd has not started
> >     ACPI-1121: *** Error: Method execution failed [\_SB_.LNKA._STA] (Node cf6b6e20), AE_AML_REGION_LIMIT
> >     ACPI-1121: *** Error: Method execution failed [\_SB_.LNKB._STA] (Node cf6b6f20), AE_AML_REGION_LIMIT
> >     ACPI-1121: *** Error: Method execution failed [\_SB_.LNKC._STA] (Node cf6b4200), AE_AML_REGION_LIMIT
> >     ACPI-1121: *** Error: Method execution failed [\_SB_.LNKD._STA] (Node cf6b4300), AE_AML_REGION_LIMIT
> >     ACPI-1121: *** Error: Method execution failed [\_SB_.LNKE._STA] (Node cf6b4400), AE_AML_REGION_LIMIT
> >     ACPI-1121: *** Error: Method execution failed [\_SB_.LNKF._STA] (Node cf6b4500), AE_AML_REGION_LIMIT
> >     ACPI-1121: *** Error: Method execution failed [\_SB_.LNKG._STA] (Node cf6b4600), AE_AML_REGION_LIMIT
> >     ACPI-1121: *** Error: Method execution failed [\_SB_.LNKH._STA] (Node cf6b4700), AE_AML_REGION_LIMIT
> > ACPI: Power Resource [GFAN] (off)
> > PCI: Probing PCI hardware
> > PCI: No IRQ known for interrupt pin A of device 00:02.0
> > PCI: No IRQ known for interrupt pin A of device 00:1d.0
> > PCI: No IRQ known for interrupt pin B of device 00:1d.1
> > PCI: No IRQ known for interrupt pin C of device 00:1d.2
> > PCI: No IRQ known for interrupt pin D of device 00:1d.7
> > PCI: No IRQ known for interrupt pin A of device 00:1f.1
> > PCI: No IRQ known for interrupt pin B of device 00:1f.5
> > PCI: No IRQ known for interrupt pin B of device 00:1f.6
> > PCI: No IRQ known for interrupt pin A of device 01:03.0
> > PCI: No IRQ known for interrupt pin B of device 01:03.1
> > PCI: No IRQ known for interrupt pin C of device 01:03.2
> > PCI: No IRQ known for interrupt pin A of device 01:04.0
> > PCI: No IRQ known for interrupt pin A of device 01:05.0
> > PCI: Using ACPI for IRQ routing
> > 
> > 
> > *  Then I tried to get the dsdt file from cat /proc/acpi/dsdt with a
> > kernel without my tweak_dsdt but with acpi=on
> > 
> > I decompile it with either pacpidump or isal but the output was not
> > recompilable, even when I do not change anything !!!!
> > 
> > Here is what I have done :
> > 
> > ** I first try to decompile with acpidump ....
> > 
> > Prompt# acpidump -f dsdt.original.dat > dsdt.original.asl
> > 
> > Prompt#  iasl -tc dsdt.original.asl
> > 
> > Intel ACPI Component Architecture
> > ASL Optimizing Compiler / AML Disassembler version 20030522 [May 23 2003]
> > Copyright (C) 2000 - 2003 Intel Corporation
> > Supports ACPI Specification Revision 2.0b
> > 
> > dsdt.original.asl   645:                 Subtract(FindSetRightBit(IO11, Zero), 0x1, Local0)
> > Error    1037 -        parse error, unexpected PARSEOP_ZERO, expecting ')' ^ 
> > 
> > dsdt.original.asl  5075: If(SS1_) {
> > Error    1037 -           ^ parse error, unexpected PARSEOP_IF
> > 
> > ASL Input:  dsdt.original.asl - 5083 lines, 180744 bytes, 3170 keywords
> > Compilation complete. 2 Errors, 0 Warnings, 0 Remarks, 0 Optimizations
> > 
> > ** So I try next to decompile with iasl
> > 
> > prompt# iasl -d dsdt.original.dat
> > 
> > Intel ACPI Component Architecture
> > ASL Optimizing Compiler / AML Disassembler version 20030522 [May 23 2003]
> > Copyright (C) 2000 - 2003 Intel Corporation
> > Supports ACPI Specification Revision 2.0b
> > 
> > Loading Acpi table from file dsdt.original.dat
> > Acpi table [DSDT] successfully installed and loaded
> > Pass 1 parse of [DSDT]
> > Pass 2 parse of [DSDT]
> > Parsing Deferred Opcodes (Methods/Buffers/Packages/Regions)
> > ...................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
> > Parsing completed
> > Disassembly completed, written to "dsdt.original.dsl"
> > 
> > Prompt$ iasl -tc dsdt.original.dsl
> > 
> > Intel ACPI Component Architecture
> > ASL Optimizing Compiler / AML Disassembler version 20030522 [May 23 2003]
> > Copyright (C) 2000 - 2003 Intel Corporation
> > Supports ACPI Specification Revision 2.0b
> > 
> > dsdt.original.dsl  7237:     If (SS1)
> > Error    1037 -               ^ parse error, unexpected PARSEOP_IF
> > 
> > ASL Input:  dsdt.original.dsl - 7247 lines, 247148 bytes, 3170 keywords
> > Compilation complete. 1 Errors, 0 Warnings, 0 Remarks, 0 Optimizations
> > 
> > ########################################################################
> > 
> > 
> > So ... I'm wrong somewhere ... but where ... can anybody give me a
> > clue ?
> > 
> > 
> > -- 
> >  Oli
> > 
> > 
> > -------------------------------------------------------
> > This SF.Net email sponsored by: Free pre-built ASP.NET sites including
> > Data Reports, E-commerce, Portals, and Forums are available now.
> > Download today and enter to win an XBOX or Visual Studio .NET.
> > http://aspnet.click-url.com/go/psa00100003ave/direct;at.aspnet_072303_01/01
> > _______________________________________________
> > ACPI-support mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/acpi-support
> 
> 
> 

-- 
 Oli


-------------------------------------------------------
This SF.Net email sponsored by: Free pre-built ASP.NET sites including
Data Reports, E-commerce, Portals, and Forums are available now.
Download today and enter to win an XBOX or Visual Studio .NET.
http://aspnet.click-url.com/go/psa00100003ave/direct;at.aspnet_072303_01/01