Re: [ACPI-sppt] [Q] M2N : DSDT : unable to use a tweak my own DSDT or a provided one

Mads Paulin <[email protected]> 15 Aug 2003 17:02:31 +0200
Newsgroups	gmane.linux.acpi.support
Message-ID	<1060959752.1709.23.camel@Home>
On Fri, 2003-08-15 at 16:01, oli wrote:
> Mads Paulin <[email protected]> writes:
> 
> > Hi,
> > 
> > Have you tried compiling the DSDT with the -on option for iasl ??
> > 
> > I have and M2400N laptop and acpi works (not 100% but better than yours
> > :-) ) 
> > 
> > Mads
> > 
> 
> 
> May I ask you somme questions :

Yes ofcourse :-)
> 
> Did you use the initrd technics or include de dsdt in the kernel ?

In the kernel.
> 
> What distrib of linux did you use ?

Mdk9.1
> 
> What kernel version ?
2.4.22pre6-ac1
> 
> Did you use your own modified dsdt or the custom one provided by the
> dsdt database ?

206-custom from acpi.sf.net
> 
> Did you succeed to get the internal modem to work ? (which possibly
> has nothing to do with the ACPI ... but tht's not sure to me)

No - never tried - I got LAN connection

I think the modem is some unsupproted win-modem but I am not sure..
> 
> Thanx in advance for your answers ?

You are welcome


Mads
> 
> 
> 
> > 
> > On Fri, 2003-08-15 at 10:09, oli wrote:
> > > 
> > > Hi !
> > > 
> > > I have a M2N with a linux 2.4.22 (under distrib mdk9.1-cooker) !
> > > 
> > > Without doing anything I have the kevent overload Pb, has anybody with
> > > such a laptop may have without tweaking his dsdt.
> > > 
> > > So a tried to use my own DSDT table.
> > > 
> > > *  I first tried to use the custum one available on the repository of
> > > acpi4linux
> > > 
> > > http://acpi.sourceforge.net/dsdt/tables/ASUS/M2400N/ASUS-M2400N-0206-custom.asl.gz
> > > 
> > > I recompile this dsdt table ... put the .hex file for inclusion the kernel
> > > I recompile the kernel 2.4.22 with the TWEAK-DSTD option on.
> > > 
> > > But  the result is that it seems that this dsdt is not understood by
> > > the kernel.
> > > 
> > > dmesg gives this output :
> > > 
> > >     ACPI-0292: *** Info: Table [DSDT] replaced by host OS
> > >     ACPI-1121: *** Error: Method execution failed [\_SB_.LNKA._STA] (Node cf6b6e20), AE_AML_REGION_LIMIT
> > >     ACPI-0098: *** Error: Method execution failed [\_SB_.LNKA._STA] (Node cf6b6e20), AE_AML_REGION_LIMIT
> > >     ACPI-1121: *** Error: Method execution failed [\_SB_.LNKB._STA] (Node cf6b6f20), AE_AML_REGION_LIMIT
> > >     ACPI-0098: *** Error: Method execution failed [\_SB_.LNKB._STA] (Node cf6b6f20), AE_AML_REGION_LIMIT
> > >     ACPI-1121: *** Error: Method execution failed [\_SB_.LNKC._STA] (Node cf6b4200), AE_AML_REGION_LIMIT
> > >     ACPI-0098: *** Error: Method execution failed [\_SB_.LNKC._STA] (Node cf6b4200), AE_AML_REGION_LIMIT
> > >     ACPI-1121: *** Error: Method execution failed [\_SB_.LNKD._STA] (Node cf6b4300), AE_AML_REGION_LIMIT
> > >     ACPI-0098: *** Error: Method execution failed [\_SB_.LNKD._STA] (Node cf6b4300), AE_AML_REGION_LIMIT
> > >     ACPI-1121: *** Error: Method execution failed [\_SB_.LNKE._STA] (Node cf6b4400), AE_AML_REGION_LIMIT
> > >     ACPI-0098: *** Error: Method execution failed [\_SB_.LNKE._STA] (Node cf6b4400), AE_AML_REGION_LIMIT
> > >     ACPI-1121: *** Error: Method execution failed [\_SB_.LNKF._STA] (Node cf6b4500), AE_AML_REGION_LIMIT
> > >     ACPI-0098: *** Error: Method execution failed [\_SB_.LNKF._STA] (Node cf6b4500), AE_AML_REGION_LIMIT
> > >     ACPI-1121: *** Error: Method execution failed [\_SB_.LNKG._STA] (Node cf6b4600), AE_AML_REGION_LIMIT
> > >     ACPI-0098: *** Error: Method execution failed [\_SB_.LNKG._STA] (Node cf6b4600), AE_AML_REGION_LIMIT
> > >     ACPI-1121: *** Error: Method execution failed [\_SB_.LNKH._STA] (Node cf6b4700), AE_AML_REGION_LIMIT
> > >     ACPI-0098: *** Error: Method execution failed [\_SB_.LNKH._STA] (Node cf6b4700), AE_AML_REGION_LIMIT
> > > ACPI: Interpreter enabled
> > > ACPI: Using PIC for interrupt routing
> > > ACPI: System [ACPI] (supports S0 S1 S3 (swsusp) S4 S5)
> > > ACPI: PCI Root Bridge [PCI0] (00:00)
> > > PCI: Probing PCI hardware (bus 00)
> > > PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
> > > Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge
> > > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> > > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
> > > ACPI: Embedded Controller [EC0] (gpe 28)
> > > schedule_task(): keventd has not started
> > >     ACPI-1121: *** Error: Method execution failed [\_SB_.LNKA._STA] (Node cf6b6e20), AE_AML_REGION_LIMIT
> > >     ACPI-1121: *** Error: Method execution failed [\_SB_.LNKB._STA] (Node cf6b6f20), AE_AML_REGION_LIMIT
> > >     ACPI-1121: *** Error: Method execution failed [\_SB_.LNKC._STA] (Node cf6b4200), AE_AML_REGION_LIMIT
> > >     ACPI-1121: *** Error: Method execution failed [\_SB_.LNKD._STA] (Node cf6b4300), AE_AML_REGION_LIMIT
> > >     ACPI-1121: *** Error: Method execution failed [\_SB_.LNKE._STA] (Node cf6b4400), AE_AML_REGION_LIMIT
> > >     ACPI-1121: *** Error: Method execution failed [\_SB_.LNKF._STA] (Node cf6b4500), AE_AML_REGION_LIMIT
> > >     ACPI-1121: *** Error: Method execution failed [\_SB_.LNKG._STA] (Node cf6b4600), AE_AML_REGION_LIMIT
> > >     ACPI-1121: *** Error: Method execution failed [\_SB_.LNKH._STA] (Node cf6b4700), AE_AML_REGION_LIMIT
> > > ACPI: Power Resource [GFAN] (off)
> > > PCI: Probing PCI hardware
> > > PCI: No IRQ known for interrupt pin A of device 00:02.0
> > > PCI: No IRQ known for interrupt pin A of device 00:1d.0
> > > PCI: No IRQ known for interrupt pin B of device 00:1d.1
> > > PCI: No IRQ known for interrupt pin C of device 00:1d.2
> > > PCI: No IRQ known for interrupt pin D of device 00:1d.7
> > > PCI: No IRQ known for interrupt pin A of device 00:1f.1
> > > PCI: No IRQ known for interrupt pin B of device 00:1f.5
> > > PCI: No IRQ known for interrupt pin B of device 00:1f.6
> > > PCI: No IRQ known for interrupt pin A of device 01:03.0
> > > PCI: No IRQ known for interrupt pin B of device 01:03.1
> > > PCI: No IRQ known for interrupt pin C of device 01:03.2
> > > PCI: No IRQ known for interrupt pin A of device 01:04.0
> > > PCI: No IRQ known for interrupt pin A of device 01:05.0
> > > PCI: Using ACPI for IRQ routing
> > > 
> > > 
> > > *  Then I tried to get the dsdt file from cat /proc/acpi/dsdt with a
> > > kernel without my tweak_dsdt but with acpi=on
> > > 
> > > I decompile it with either pacpidump or isal but the output was not
> > > recompilable, even when I do not change anything !!!!
> > > 
> > > Here is what I have done :
> > > 
> > > ** I first try to decompile with acpidump ....
> > > 
> > > Prompt# acpidump -f dsdt.original.dat > dsdt.original.asl
> > > 
> > > Prompt#  iasl -tc dsdt.original.asl
> > > 
> > > Intel ACPI Component Architecture
> > > ASL Optimizing Compiler / AML Disassembler version 20030522 [May 23 2003]
> > > Copyright (C) 2000 - 2003 Intel Corporation
> > > Supports ACPI Specification Revision 2.0b
> > > 
> > > dsdt.original.asl   645:                 Subtract(FindSetRightBit(IO11, Zero), 0x1, Local0)
> > > Error    1037 -        parse error, unexpected PARSEOP_ZERO, expecting ')' ^ 
> > > 
> > > dsdt.original.asl  5075: If(SS1_) {
> > > Error    1037 -           ^ parse error, unexpected PARSEOP_IF
> > > 
> > > ASL Input:  dsdt.original.asl - 5083 lines, 180744 bytes, 3170 keywords
> > > Compilation complete. 2 Errors, 0 Warnings, 0 Remarks, 0 Optimizations
> > > 
> > > ** So I try next to decompile with iasl
> > > 
> > > prompt# iasl -d dsdt.original.dat
> > > 
> > > Intel ACPI Component Architecture
> > > ASL Optimizing Compiler / AML Disassembler version 20030522 [May 23 2003]
> > > Copyright (C) 2000 - 2003 Intel Corporation
> > > Supports ACPI Specification Revision 2.0b
> > > 
> > > Loading Acpi table from file dsdt.original.dat
> > > Acpi table [DSDT] successfully installed and loaded
> > > Pass 1 parse of [DSDT]
> > > Pass 2 parse of [DSDT]
> > > Parsing Deferred Opcodes (Methods/Buffers/Packages/Regions)
> > > ...................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
> > > Parsing completed
> > > Disassembly completed, written to "dsdt.original.dsl"
> > > 
> > > Prompt$ iasl -tc dsdt.original.dsl
> > > 
> > > Intel ACPI Component Architecture
> > > ASL Optimizing Compiler / AML Disassembler version 20030522 [May 23 2003]
> > > Copyright (C) 2000 - 2003 Intel Corporation
> > > Supports ACPI Specification Revision 2.0b
> > > 
> > > dsdt.original.dsl  7237:     If (SS1)
> > > Error    1037 -               ^ parse error, unexpected PARSEOP_IF
> > > 
> > > ASL Input:  dsdt.original.dsl - 7247 lines, 247148 bytes, 3170 keywords
> > > Compilation complete. 1 Errors, 0 Warnings, 0 Remarks, 0 Optimizations
> > > 
> > > ########################################################################
> > > 
> > > 
> > > So ... I'm wrong somewhere ... but where ... can anybody give me a
> > > clue ?
> > > 
> > > 
> > > -- 
> > >  Oli
> > > 
> > > 
> > > -------------------------------------------------------
> > > This SF.Net email sponsored by: Free pre-built ASP.NET sites including
> > > Data Reports, E-commerce, Portals, and Forums are available now.
> > > Download today and enter to win an XBOX or Visual Studio .NET.
> > > http://aspnet.click-url.com/go/psa00100003ave/direct;at.aspnet_072303_01/01
> > > _______________________________________________
> > > ACPI-support mailing list
> > > [email protected]
> > > https://lists.sourceforge.net/lists/listinfo/acpi-support
> > 
> > 
> > 
> 
> -- 
>  Oli
> 
> 
> -------------------------------------------------------
> This SF.Net email sponsored by: Free pre-built ASP.NET sites including
> Data Reports, E-commerce, Portals, and Forums are available now.
> Download today and enter to win an XBOX or Visual Studio .NET.
> http://aspnet.click-url.com/go/psa00100003ave/direct;at.aspnet_072303_01/01
> _______________________________________________
> ACPI-support mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/acpi-support




-------------------------------------------------------
This SF.Net email sponsored by: Free pre-built ASP.NET sites including
Data Reports, E-commerce, Portals, and Forums are available now.
Download today and enter to win an XBOX or Visual Studio .NET.
http://aspnet.click-url.com/go/psa00100003ave/direct;at.aspnet_072303_01/01