Re: [ACPI-sppt] help needed with acpi on tecra s1

Hi
On Sun, 2003-08-31 at 18:05, dus wrote:
>  
> 
> I can't use the standard processor module, as my laptop hangs during boot if I do. 

For me me its new way to resolve the problem, may be I will try to :) 

> I'd be happy to use the intel binary but there are unresolved symbols.

you have cpu-freq on kernel 2.4.22-ac1

you can try disassemble your DSDT, Correct and override the bios also.
with iasl - ACPI CA 
(http://developer.intel.com/technology/iapc/acpi/downloads.htm)

salut

> Here is /var/log/dmesg when booting without the processor module (note that battery status doesn't work either):
> ACPI: Subsystem revision 20030813
> ACPI: Interpreter enabled
> ACPI: Using PIC for interrupt routing
> ACPI: System [ACPI] (supports S0 S3 S4 S5)
>     ACPI-1121: *** Error: Method execution failed [\_SB_.BAT0._STA] (Node c1859b40), AE_NOT_EXIST
> 
>     ACPI-1121: *** Error: Method execution failed [\_SB_.BAT1._STA] (Node c1859dc0), AE_NOT_EXIST
> 
> ACPI: PCI Root Bridge [PCI0] (00:00) 
> PCI: Probing PCI hardware (bus 00) 
> PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 
> Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge 
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] 
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] 
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 7 *10 11) 
> ACPI: PCI Interrupt Link [LNKB] (IRQs 6, enabled at IRQ 10) 
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 7 10 *11) 
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 7 10 *11) 
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 *11 14 15) 
> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 5 7 10 11, disabled) 
> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15, disabled) 
> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 5 7 10 11, disabled) 
> ACPI: Embedded Controller [EC0] (gpe 16) 
> ACPI: Power Resource [PUT2] (on) 
> ACPI: Power Resource [PFA1] (off) 
> ACPI: Power Resource [PFA0] (off) 
> PCI: Probing PCI hardware
> 
> ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5 
> ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 
> ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 
> ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5 
> ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 
> ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 
> PCI: Using ACPI for IRQ routing 
> PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' 

> ACPI: AC Adapter [AC] (on-line) 
> ACPI: Power Button (FF) [PWRF] 
> ACPI: Lid Switch [LID] 
> ACPI: Fan [FAN0] (off) 
> ACPI: Fan [FAN1] (off) 

-- 
SérgioMB
email: [email protected]

Who gives me one shell, give me everything.



-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf