Re: [ACPI-sppt] ASUS M2400N update > ASUS Centrino update

Ducrot Bruno <[email protected]> Sat, 20 Sep 2003 13:16:09 +0200
Newsgroups gmane.linux.acpi.support
Message-ID <[email protected]>
On Sat, Sep 20, 2003 at 01:02:47PM +0100, Luca Capello wrote:
> Hello, I think Robert's patch solved the problem for all Centrino, at
> least on mine (M3N). This evening I'm going to add the original DSDT and 
> this new one to the ACPI DSDT database. After the quotation, the results 
> w/ the 'thermal' module on Linux kernel 2.4.21 and DSDT loaded from initrd.
> 
> on 19/09/2003 23.33, Robert Vollmert wrote:
> >Hello,
> >
> >here's as small patch to the custom DSDT from acpi.sf.net. The address
> >TSAD that was supposed to be read somewhere from system memory is now
> >hard-coded to a value obtained from the official L3800C DSDT.
> >
> >With this DSDT, I get sensible temperature readings. Also, the
> >definition of _L00 could be replaced without causing keventd to take
> >the CPU hostage.
> >

Unfortunately this was the easy part.  You still have trouble with other
component of the thermal zone.

-- 
Ducrot Bruno

--  Which is worse:  ignorance or apathy?
--  Don't know.  Don't care.


-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf