[ACPI-sppt] ACPI on IBM ThinkPad G40 update

[email protected] Mon, 22 Sep 2003 19:03:44 +0200 (CEST)
Newsgroups gmane.linux.acpi.support
Message-ID <[email protected]>
Hello,

I've compiled ACPI 20030916 with debug info into 2.4.22 kernel
on Debian Sid. After boot ACPI isn't functional even with
parameters acpi=force and/or pci=noacpi.

Here's dmesg | grep ACPI output:

 BIOS-e820: 000000002f6f0000 - 000000002f6f8000 (ACPI data)
 BIOS-e820: 000000002f6f8000 - 000000002f6fa000 (ACPI NVS)
ACPI: have wakeup address 0xc0001000
ACPI: RSDP (v002 IBM                                       ) @
0x000f7330 ACPI: XSDT (v001 IBM    TP-1T    0x00001042  LTP
0x00000000) @ 0x2f6f2447 ACPI: FADT (v002 IBM    TP-1T   
0x00001042 IBM  0x00000001) @ 0x2f6f248b ACPI: SSDT (v001 IBM   
TP-1T    0x00001042 MSFT 0x0100000d) @ 0x2f6f253f ACPI: ECDT
(v001 IBM    TP-1T    0x00001042 IBM  0x00000001) @ 0x2f6f7f87
ACPI: BOOT (v001 IBM    TP-1T    0x00001042  LTP 0x00000001) @
0x2f6f7fd8 ACPI: DSDT (v001 IBM    TP-1T    0x00001042 MSFT
0x0100000d) @ 0x00000000 ACPI: Subsystem revision 20030916
 tbxface-0117 [03] acpi_load_tables      : ACPI Tables
successfully acquired ACPI Namespace successfully loaded at root
c02f1b1c
evxfevnt-0093 [04] acpi_enable           : Transition to ACPI
mode successful ACPI: Found ECDT
ACPI: Could not use ECDT
evxfevnt-0139 [06] acpi_disable          : ACPI mode disabled
PCI: ACPI tables contain no PCI IRQ routing entries

Thanks for any help


-- 

Martin Perina



-- 
Potrebujete vice prostoru pro vase stranky?
Ptejte se na http://sluzby.volny.cz/cs/product/ftp_paid




-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf