New Device: TASCAM DR Series (DR-05XP)

alsa-project/alsa-ucm-conf issue #819 was opened from robobenklein:

I'm not quite familiar enough here to add these devices since they all have different capabilities (channels/streams/etc). I only have the DR-05XP but was able to get it working in pipewire with just a rudimentary HiFi config.

The DR-05XP is 2-channel stereo input, however there are some other DR series devices that have more inputs and the USB identifier is not enough on it's own to know which device it is.

alsa-info: https://alsa-project.org/db/?f=92aab8003f13685db869a948e85b8b9809d1f9d8

udev USB info: (some unrelated lines omitted)

```
E: SUBSYSTEM=sound
E: SOUND_INITIALIZED=1
E: ID_VENDOR_FROM_DATABASE=TEAC Corp.
E: ID_BUS=usb
E: ID_MODEL=TASCAM_DR_Series
E: ID_MODEL_ENC=TASCAM\x20DR\x20Series
E: ID_MODEL_ID=8065
E: ID_SERIAL=TEAC_Corporation_TASCAM_DR_Series
E: ID_VENDOR=TEAC_Corporation
E: ID_VENDOR_ENC=TEAC\x20Corporation
E: ID_VENDOR_ID=0644
E: ID_REVISION=0121
E: ID_TYPE=audio
E: ID_USB_MODEL=TASCAM_DR_Series
E: ID_USB_MODEL_ENC=TASCAM\x20DR\x20Series
E: ID_USB_MODEL_ID=8065
E: ID_USB_SERIAL=TEAC_Corporation_TASCAM_DR_Series
E: ID_USB_VENDOR=TEAC_Corporation
E: ID_USB_VENDOR_ENC=TEAC\x20Corporation
E: ID_USB_VENDOR_ID=0644
E: ID_USB_REVISION=0121
E: ID_USB_TYPE=audio
E: ID_USB_INTERFACES=:010100:010200:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=snd-usb-audio
E: ID_ID=usb-TEAC_Corporation_TASCAM_DR_Series-00
```

I can't even assume that the devices are all stereo channels either, like the DR-10L Pro is probably mono (lav mic). Any assistance/advice on getting this added would be appreciated.

Issue URL     : https://github.com/alsa-project/alsa-ucm-conf/issues/819
Repository URL: https://github.com/alsa-project/alsa-ucm-conf