Re: No sound on internal speaker

Nicolas Martin <[email protected]>
Newsgroups gmane.linux.alsa.user
Message-ID <CA+=StNyWtGW2ZKm6B=P-UzxyHk6UgFqPi2PtVWX=xvMZzj9+rw@mail.gmail.com>
Card 1 is a Nvidia graphic card; it does not allow to play sound on the
internal speaker.

I found the solution. The Lenovo P520 is a dual codec workstation; ALC662
(hw:0,0) drives the rear audio plugs; ALC233 (hw:0,4) drives the front
audio plugs and the internal speaker.
So hw:0,4 should be used for playback.

Hope it will help other people.

NM

On Thu, Jul 30, 2020 at 1:16 AM Alan Corey <[email protected]> wrote:

> Try using card 1.  Look at amixer -c 1
>
> On 7/29/20, Nicolas Martin <[email protected]> wrote:
> > Hi,
> >
> > I have a Lenovo P520 workstation with an internal speaker on which I'd
> like
> > to play sound.
> > OS installed is RHEL 7U6 with alsa 1.1.6
> >
> > the internal speaker is enabled in BIOS; however I don't have any sound
> > output on it.
> >
> > The only way to have sound is to plug an external speaker.
> >
> > If I load the module snd-pcsp, there is an additional card that appears
> > that I can use to play sound on the internal speaker, although the sound
> > quality is very poor (crackling).
> >
> > I don't really know where to dig concerning this issue; whether it's a
> bug
> > with the kernel module or alsa; I'd appreciate some guidance.
> >
> > The audio chipset (not using the Nvidia output):
> >  # lspci -v | grep -i audio
> > 00:1f.3 Audio device: Intel Corporation 200 Series PCH HD Audio
> > 65:00.1 Audio device: NVIDIA Corporation GP107GL High Definition Audio
> > Controller (rev a1)
> >
> > Below the output of aplay -l and aplay -L:
> > # aplay -l
> > **** List of PLAYBACK Hardware Devices ****
> > card 0: PCH [HDA Intel PCH], device 0: ALC662 rev3 Analog [ALC662 rev3
> > Analog]
> >   Subdevices: 1/1
> >   Subdevice #0: subdevice #0
> > card 0: PCH [HDA Intel PCH], device 4: ALC233 Analog [ALC233 Analog]
> >   Subdevices: 1/1
> >   Subdevice #0: subdevice #0
> > card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
> >   Subdevices: 1/1
> >   Subdevice #0: subdevice #0
> > card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
> >   Subdevices: 1/1
> >   Subdevice #0: subdevice #0
> > card 1: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
> >   Subdevices: 1/1
> >   Subdevice #0: subdevice #0
> > card 1: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
> >   Subdevices: 1/1
> >   Subdevice #0: subdevice #0
> >
> > # aplay -L
> > null
> >     Discard all samples (playback) or generate zero samples (capture)
> > pulse
> >     PulseAudio Sound Server
> > default:CARD=PCH
> >     HDA Intel PCH, ALC662 rev3 Analog
> >     Default Audio Device
> > sysdefault:CARD=PCH
> >     HDA Intel PCH, ALC662 rev3 Analog
> >     Default Audio Device
> > front:CARD=PCH,DEV=0
> >     HDA Intel PCH, ALC662 rev3 Analog
> >     Front speakers
> > surround21:CARD=PCH,DEV=0
> >     HDA Intel PCH, ALC662 rev3 Analog
> >     2.1 Surround output to Front and Subwoofer speakers
> > surround40:CARD=PCH,DEV=0
> >     HDA Intel PCH, ALC662 rev3 Analog
> >     4.0 Surround output to Front and Rear speakers
> > surround41:CARD=PCH,DEV=0
> >     HDA Intel PCH, ALC662 rev3 Analog
> >     4.1 Surround output to Front, Rear and Subwoofer speakers
> > surround50:CARD=PCH,DEV=0
> >     HDA Intel PCH, ALC662 rev3 Analog
> >     5.0 Surround output to Front, Center and Rear speakers
> > surround51:CARD=PCH,DEV=0
> >     HDA Intel PCH, ALC662 rev3 Analog
> >     5.1 Surround output to Front, Center, Rear and Subwoofer speakers
> > surround71:CARD=PCH,DEV=0
> >     HDA Intel PCH, ALC662 rev3 Analog
> >     7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
> > hdmi:CARD=NVidia,DEV=0
> >     HDA NVidia, HDMI 0
> >     HDMI Audio Output
> > hdmi:CARD=NVidia,DEV=1
> >     HDA NVidia, HDMI 1
> >     HDMI Audio Output
> > hdmi:CARD=NVidia,DEV=2
> >     HDA NVidia, HDMI 2
> >     HDMI Audio Output
> > hdmi:CARD=NVidia,DEV=3
> >     HDA NVidia, HDMI 3
> >     HDMI Audio Output
> >
>
>
> --
> -------------
> No, I won't  call it "climate change", do you have a "reality problem"? -
> AB1JX
> Cities are cages built to contain excess people and keep them from
> cluttering up nature.
> Impeach  Impeach  Impeach  Impeach  Impeach  Impeach  Impeach  Impeach
>

_______________________________________________
Alsa-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-user
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.