perl-XML-SAX failed on noarch dockyard-devel (c64.arklinux.org)

arklinux <[email protected]>
Newsgroups gmane.linux.arklinux.arkwatch
Message-ID <[email protected]> 
perl-XML-SAX failed to build on noarch for dockyard-devel.
Last 250 lines of build log:

Installing perl-XML-SAX-0.16-1ark.src.rpm
Building target platforms: noarch
Building for target noarch
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.91232
+ umask 022
+ cd /build-perl-XML-SAX-noarch/BUILD
+ cd /build-perl-XML-SAX-noarch/BUILD
+ rm -rf XML-SAX-0.16
+ tar -xf /usr/src/ark/SOURCES/XML-SAX-0.16.tar.lz
+ cd XML-SAX-0.16
++ /usr/bin/id -u
+ '[' 0 = 0 ']'
+ /bin/chown -Rhf root .
++ /usr/bin/id -u
+ '[' 0 = 0 ']'
+ /bin/chgrp -Rhf root .
+ /bin/chmod -Rf a+rX,g-w,o-w .
+ exit 0
Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.91232
+ umask 022
+ cd /build-perl-XML-SAX-noarch/BUILD
+ cd XML-SAX-0.16
+ echo y
+ perl Makefile.PL INSTALLDIRS=vendor
Checking if your kit is complete...
Looks good
Writing Makefile for XML::SAX::Base
Writing Makefile for XML::SAX
+ make
cp SAX/PurePerl/Exception.pm blib/lib/XML/SAX/PurePerl/Exception.pm
cp SAX/PurePerl/UnicodeExt.pm blib/lib/XML/SAX/PurePerl/UnicodeExt.pm
cp SAX/ParserFactory.pm blib/lib/XML/SAX/ParserFactory.pm
cp SAX/PurePerl/DocType.pm blib/lib/XML/SAX/PurePerl/DocType.pm
cp SAX/PurePerl/NoUnicodeExt.pm blib/lib/XML/SAX/PurePerl/NoUnicodeExt.pm
cp SAX/PurePerl/Reader/UnicodeExt.pm blib/lib/XML/SAX/PurePerl/Reader/UnicodeExt.pm
cp SAX/DocumentLocator.pm blib/lib/XML/SAX/DocumentLocator.pm
cp SAX/PurePerl/Reader/Stream.pm blib/lib/XML/SAX/PurePerl/Reader/Stream.pm
cp SAX/PurePerl/EncodingDetect.pm blib/lib/XML/SAX/PurePerl/EncodingDetect.pm
cp SAX.pm blib/lib/XML/SAX.pm
cp SAX/PurePerl/DebugHandler.pm blib/lib/XML/SAX/PurePerl/DebugHandler.pm
cp SAX/PurePerl/XMLDecl.pm blib/lib/XML/SAX/PurePerl/XMLDecl.pm
cp SAX/PurePerl/Productions.pm blib/lib/XML/SAX/PurePerl/Productions.pm
cp SAX/PurePerl/Reader/NoUnicodeExt.pm blib/lib/XML/SAX/PurePerl/Reader/NoUnicodeExt.pm
cp SAX/PurePerl/Reader/String.pm blib/lib/XML/SAX/PurePerl/Reader/String.pm
cp SAX/PurePerl/Reader/URI.pm blib/lib/XML/SAX/PurePerl/Reader/URI.pm
cp SAX/PurePerl/DTDDecls.pm blib/lib/XML/SAX/PurePerl/DTDDecls.pm
cp SAX/PurePerl.pm blib/lib/XML/SAX/PurePerl.pm
cp SAX/Intro.pod blib/lib/XML/SAX/Intro.pod
cp SAX/PurePerl/Reader.pm blib/lib/XML/SAX/PurePerl/Reader.pm
make[1]: Entering directory `/build-perl-XML-SAX-noarch/BUILD/XML-SAX-0.16/XML-SAX-Base'
cp lib/XML/SAX/placeholder.pl ../blib/lib/XML/SAX/placeholder.pl
cp lib/XML/SAX/Base.pm ../blib/lib/XML/SAX/Base.pm
cp lib/XML/SAX/Exception.pm ../blib/lib/XML/SAX/Exception.pm
Manifying ../blib/man3/XML::SAX::Base.3pm
Manifying ../blib/man3/XML::SAX::Exception.3pm
make[1]: Leaving directory `/build-perl-XML-SAX-noarch/BUILD/XML-SAX-0.16/XML-SAX-Base'
Manifying blib/man3/XML::SAX::DocumentLocator.3pm
Manifying blib/man3/XML::SAX.3pm
Manifying blib/man3/XML::SAX::PurePerl.3pm
Manifying blib/man3/XML::SAX::Intro.3pm
Manifying blib/man3/XML::SAX::ParserFactory.3pm
Manifying blib/man3/XML::SAX::PurePerl::Reader.3pm
+ make test
make[1]: Entering directory `/build-perl-XML-SAX-noarch/BUILD/XML-SAX-0.16/XML-SAX-Base'
Manifying ../blib/man3/XML::SAX::Base.3pm
Manifying ../blib/man3/XML::SAX::Exception.3pm
make[1]: Leaving directory `/build-perl-XML-SAX-noarch/BUILD/XML-SAX-0.16/XML-SAX-Base'
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00basic........ok
t/01known........ok
t/10xmldecl1.....ok
t/11xmldecl2.....ok
t/12miscstart....ok
t/13int_ent......ok
t/14encoding.....ok
t/15element......ok
t/16large........parsed 80085 bytes in 1 seconds
ok
t/20factory......ok
t/21saxini.......ok
t/40cdata........ok
t/42entities.....ok
t/99cleanup......ok
All tests successful.
Files=14, Tests=103,  3 wallclock secs ( 2.08 cusr +  0.20 csys =  2.28 CPU)
make[1]: Entering directory `/build-perl-XML-SAX-noarch/BUILD/XML-SAX-0.16/XML-SAX-Base'
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, '../blib/lib', '../blib/arch')" t/*.t
t/00basic...............ok
t/01exception...........ok
t/01simpledriver........ok
t/02simplefilter........ok
t/03chdriver............ok
t/04chfilter............ok
t/05dtdhdriver..........ok
t/06lexhdriver..........ok
t/07declhdriver.........ok
t/08errorhdriver........ok
t/09resoldriver.........ok
t/10dochdriver..........ok
t/11sax1multiclass......ok
t/12sax2multiclass......ok
t/13handlerswitch.......ok
t/14downstreamswitch....ok
t/15parentswitch........ok
t/16gethandlers.........ok
All tests successful.
Files=18, Tests=137,  1 wallclock secs ( 0.67 cusr +  0.16 csys =  0.83 CPU)
make[1]: Leaving directory `/build-perl-XML-SAX-noarch/BUILD/XML-SAX-0.16/XML-SAX-Base'
+ exit 0
Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.13113
+ umask 022
+ cd /build-perl-XML-SAX-noarch/BUILD
+ cd XML-SAX-0.16
+ rm -rf /var/tmp/perl-XML-SAX-root
+ make install INSTALLDIRS=vendor DESTDIR=/var/tmp/perl-XML-SAX-root
make[1]: Entering directory `/build-perl-XML-SAX-noarch/BUILD/XML-SAX-0.16/XML-SAX-Base'
make[1]: Leaving directory `/build-perl-XML-SAX-noarch/BUILD/XML-SAX-0.16/XML-SAX-Base'
Manifying blib/man3/XML::SAX::DocumentLocator.3pm
Manifying blib/man3/XML::SAX.3pm
Manifying blib/man3/XML::SAX::PurePerl.3pm
Manifying blib/man3/XML::SAX::Intro.3pm
Manifying blib/man3/XML::SAX::ParserFactory.3pm
Manifying blib/man3/XML::SAX::PurePerl::Reader.3pm
Installing /var/tmp/perl-XML-SAX-root/usr/lib/perl5/vendor_perl/5.8.8/XML/SAX.pm
Installing /var/tmp/perl-XML-SAX-root/usr/lib/perl5/vendor_perl/5.8.8/XML/SAX/Exception.pm
Installing /var/tmp/perl-XML-SAX-root/usr/lib/perl5/vendor_perl/5.8.8/XML/SAX/DocumentLocator.pm
Installing /var/tmp/perl-XML-SAX-root/usr/lib/perl5/vendor_perl/5.8.8/XML/SAX/Intro.pod
Installing /var/tmp/perl-XML-SAX-root/usr/lib/perl5/vendor_perl/5.8.8/XML/SAX/PurePerl.pm
Installing /var/tmp/perl-XML-SAX-root/usr/lib/perl5/vendor_perl/5.8.8/XML/SAX/ParserFactory.pm
Installing /var/tmp/perl-XML-SAX-root/usr/lib/perl5/vendor_perl/5.8.8/XML/SAX/Base.pm
Installing /var/tmp/perl-XML-SAX-root/usr/lib/perl5/vendor_perl/5.8.8/XML/SAX/placeholder.pl
Installing /var/tmp/perl-XML-SAX-root/usr/lib/perl5/vendor_perl/5.8.8/XML/SAX/PurePerl/Exception.pm
Installing /var/tmp/perl-XML-SAX-root/usr/lib/perl5/vendor_perl/5.8.8/XML/SAX/PurePerl/Reader.pm
Installing /var/tmp/perl-XML-SAX-root/usr/lib/perl5/vendor_perl/5.8.8/XML/SAX/PurePerl/DocType.pm
Installing /var/tmp/perl-XML-SAX-root/usr/lib/perl5/vendor_perl/5.8.8/XML/SAX/PurePerl/NoUnicodeExt.pm
Installing /var/tmp/perl-XML-SAX-root/usr/lib/perl5/vendor_perl/5.8.8/XML/SAX/PurePerl/DTDDecls.pm
Installing /var/tmp/perl-XML-SAX-root/usr/lib/perl5/vendor_perl/5.8.8/XML/SAX/PurePerl/EncodingDetect.pm
Installing /var/tmp/perl-XML-SAX-root/usr/lib/perl5/vendor_perl/5.8.8/XML/SAX/PurePerl/XMLDecl.pm
Installing /var/tmp/perl-XML-SAX-root/usr/lib/perl5/vendor_perl/5.8.8/XML/SAX/PurePerl/Productions.pm
Installing /var/tmp/perl-XML-SAX-root/usr/lib/perl5/vendor_perl/5.8.8/XML/SAX/PurePerl/DebugHandler.pm
Installing /var/tmp/perl-XML-SAX-root/usr/lib/perl5/vendor_perl/5.8.8/XML/SAX/PurePerl/UnicodeExt.pm
Installing /var/tmp/perl-XML-SAX-root/usr/lib/perl5/vendor_perl/5.8.8/XML/SAX/PurePerl/Reader/Stream.pm
Installing /var/tmp/perl-XML-SAX-root/usr/lib/perl5/vendor_perl/5.8.8/XML/SAX/PurePerl/Reader/String.pm
Installing /var/tmp/perl-XML-SAX-root/usr/lib/perl5/vendor_perl/5.8.8/XML/SAX/PurePerl/Reader/NoUnicodeExt.pm
Installing /var/tmp/perl-XML-SAX-root/usr/lib/perl5/vendor_perl/5.8.8/XML/SAX/PurePerl/Reader/URI.pm
Installing /var/tmp/perl-XML-SAX-root/usr/lib/perl5/vendor_perl/5.8.8/XML/SAX/PurePerl/Reader/UnicodeExt.pm
Installing /var/tmp/perl-XML-SAX-root/usr/share/man/man3/XML::SAX::Intro.3pm
Installing /var/tmp/perl-XML-SAX-root/usr/share/man/man3/XML::SAX::ParserFactory.3pm
Installing /var/tmp/perl-XML-SAX-root/usr/share/man/man3/XML::SAX::PurePerl.3pm
Installing /var/tmp/perl-XML-SAX-root/usr/share/man/man3/XML::SAX::Base.3pm
Installing /var/tmp/perl-XML-SAX-root/usr/share/man/man3/XML::SAX::DocumentLocator.3pm
Installing /var/tmp/perl-XML-SAX-root/usr/share/man/man3/XML::SAX::Exception.3pm
Installing /var/tmp/perl-XML-SAX-root/usr/share/man/man3/XML::SAX::PurePerl::Reader.3pm
Installing /var/tmp/perl-XML-SAX-root/usr/share/man/man3/XML::SAX.3pm
Writing /var/tmp/perl-XML-SAX-root/usr/lib64/perl5/vendor_perl/5.8.8/x86_64-linux-thread-multi/auto/XML/SAX/.packlist
Appending installation info to /var/tmp/perl-XML-SAX-root/usr/lib64/perl5/5.8.8/x86_64-linux-thread-multi/perllocal.pod
Can't locate XML/SAX.pm in @INC (@INC contains: /usr/lib64/perl5/site_perl/5.8.8/x86_64-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7 /usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl/5.8.4 /usr/lib/perl5/site_perl/5.8.3 /usr/lib/perl5/site_perl /usr/lib64/perl5/vendor_perl/5.8.8/x86_64-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7 /usr/lib/perl5/vendor_perl/5.8.6 /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl/5.8.4 /usr/lib/perl5/vendor_perl/5.8.3 /usr/lib/perl5/vendor_perl /usr/lib64/perl5/5.8.8/x86_64-linux-thread-multi /usr/lib/perl5/5.8.8 .).
BEGIN failed--compilation aborted.
make: *** [install_sax_pureperl] Error 2
error: Bad exit status from /var/tmp/rpm-tmp.13113 (%install)


RPM build errors:
    Bad exit status from /var/tmp/rpm-tmp.13113 (%install)
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.