k9copy failed on x86_64 dockyard-devel (c64.arklinux.org)

arklinux <[email protected]>
Newsgroups gmane.linux.arklinux.build-watch
Message-ID <[email protected]>
k9copy failed to build on x86_64 for dockyard-devel.
Last 250 lines of build log:

Installing k9copy-1.1.3-1ark.src.rpm
Building target platforms: x86_64
Building for target x86_64
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.69819
+ umask 022
+ cd /build-k9copy-x86_64/BUILD
+ cd /build-k9copy-x86_64/BUILD
+ rm -rf k9copy-1.1.3
+ tar -xf /usr/src/ark/SOURCES/k9copy-1.1.3.tar.lz
+ cd k9copy-1.1.3
+ tar -xf /usr/src/ark/SOURCES/vamps-0.99.2.tar.lz
++ /usr/bin/id -u
+ '[' 0 = 0 ']'
+ /bin/chown -Rhf root .
++ /usr/bin/id -u
+ '[' 0 = 0 ']'
+ /bin/chgrp -Rhf root .
+ /bin/chmod -Rf a+rX,g-w,o-w .
+ rm -rf admin
+ cp -a /usr/share/autoconf/kde admin
+ '[' -e Makefile.cvs ']'
+ make -f Makefile.cvs
This Makefile is only for the CVS repository
This will be deleted before making the distribution

*** YOU'RE USING UNSERMAKE.
*** GOOD LUCK!! :)
*** Creating acinclude.m4
make[2]: Entering directory `/build-k9copy-x86_64/BUILD/k9copy-1.1.3'
make[2]: Leaving directory `/build-k9copy-x86_64/BUILD/k9copy-1.1.3'
*** Creating list of subdirectories
make[2]: Entering directory `/build-k9copy-x86_64/BUILD/k9copy-1.1.3'
cd . && make -f admin/Makefile.common subdirs
make[3]: Entering directory `/build-k9copy-x86_64/BUILD/k9copy-1.1.3'
make[3]: Leaving directory `/build-k9copy-x86_64/BUILD/k9copy-1.1.3'
make[2]: Leaving directory `/build-k9copy-x86_64/BUILD/k9copy-1.1.3'
*** Creating configure.files
*** Creating configure.in
make[2]: Entering directory `/build-k9copy-x86_64/BUILD/k9copy-1.1.3'
cd . && make -f admin/Makefile.common configure.in ;
make[3]: Entering directory `/build-k9copy-x86_64/BUILD/k9copy-1.1.3'
make[3]: Leaving directory `/build-k9copy-x86_64/BUILD/k9copy-1.1.3'
make[2]: Leaving directory `/build-k9copy-x86_64/BUILD/k9copy-1.1.3'
*** Creating aclocal.m4
acinclude.m4:3706: the serial number must appear before any macro definition
acinclude.m4:3751: the serial number must appear before any macro definition
acinclude.m4:3796: the serial number must appear before any macro definition
acinclude.m4:6005: the serial number must appear before any macro definition
/usr/share/aclocal/smpeg.m4:13: warning: underquoted definition of AM_PATH_SMPEG
/usr/share/aclocal/smpeg.m4:13:   run info '(automake)Extending aclocal'
/usr/share/aclocal/smpeg.m4:13:   or see http://sources.redhat.com/automake/automake.html#Extending-aclocal
*** Creating configure
*** Creating config.h template
*** Creating Makefile templates
ERROR:src/Makefile.am: unknown source extension .png for k9copy
make[1]: *** [cvs] Error 1
make: *** [all] Error 2
error: Bad exit status from /var/tmp/rpm-tmp.69819 (%prep)


RPM build errors:
    Bad exit status from /var/tmp/rpm-tmp.69819 (%prep)
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.