lirc failed on i586 dockyard-devel (fastbuild.arklinux.org)

arklinux <[email protected]>
Newsgroups gmane.linux.arklinux.build-watch
Message-ID <[email protected]> 
lirc failed to build on i586 for dockyard-devel.
Last 250 lines of build log:

checking for ifc... no
checking for efc... no
checking for pgf95... no
checking for lf95... no
checking for gfortran... gfortran
checking whether we are using the GNU Fortran 77 compiler... yes
checking whether gfortran accepts -g... yes
checking the maximum length of command line arguments... 32768
checking command to parse nm output from gcc object... ok
checking for objdir... .libs
checking for i686-pc-linux-gnu-ar... no
checking for ar... ar
checking for i686-pc-linux-gnu-ranlib... no
checking for ranlib... ranlib
checking for i686-pc-linux-gnu-strip... no
checking for strip... strip
checking if gcc static flag  works... yes
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
appending configuration tag "F77" to libtool
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for gfortran option to produce PIC... -fPIC
checking if gfortran PIC flag -fPIC works... yes
checking if gfortran supports -c -o file.o... yes
checking whether the gfortran linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking for ANSI C header files... (cached) yes
checking whether time.h and sys/time.h may both be included... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking syslog.h usability... yes
checking syslog.h presence... yes
checking for syslog.h... yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for off_t... yes
checking for pid_t... yes
checking for size_t... yes
checking whether struct tm is in sys/time.h or time.h... time.h
checking return type of signal handlers... void
checking for vprintf... yes
checking for _doprnt... no
checking for gethostname... yes
checking for gettimeofday... yes
checking for mkfifo... yes
checking for select... yes
checking for socket... yes
checking for strdup... yes
checking for strerror... yes
checking for strtoul... yes
checking for snprintf... yes
checking for strsep... yes
checking for vsyslog... yes
checking for daemon... yes
checking for forkpty... no
checking for forkpty in -lutil... yes
checking vga.h usability... no
checking vga.h presence... no
checking for vga.h... no
checking for X... libraries , headers in standard search path
checking for gethostbyname... yes
checking for connect... yes
checking for remove... yes
checking for shmat... yes
checking for IceConnectionNumber in -lICE... yes
checking for getopt_long... yes
checking for mktemp... yes
checking for Linux kernel sources... /usr/src/linux/
checking for which drivers can be installed on this system... 
checking for caraca_init in -lcaraca_client... no
checking iguanaIR.h usability... no
checking iguanaIR.h presence... no
checking for iguanaIR.h... no
checking for ir_strerror in -lirman... no
checking for ir_strerror in -lirman_sw... no
checking portaudio.h usability... yes
checking portaudio.h presence... yes
checking for portaudio.h... yes
checking for Pa_Initialize in -lportaudio... yes
checking alsa/asoundlib.h usability... yes
checking alsa/asoundlib.h presence... yes
checking for alsa/asoundlib.h... yes
checking for snd_pcm_open in -lasound... yes
checking for ALSA SB RC hwdep support... yes
checking scsi/sg.h usability... yes
checking scsi/sg.h presence... yes
checking for scsi/sg.h... yes
checking linux/input.h usability... yes
checking linux/input.h presence... yes
checking for linux/input.h... yes
checking sys/soundcard.h usability... yes
checking sys/soundcard.h presence... yes
checking for sys/soundcard.h... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating drivers/Makefile
config.status: creating drivers/lirc_atiusb/Makefile
config.status: creating drivers/lirc_bt829/Makefile
config.status: creating drivers/lirc_cmdir/Makefile
config.status: creating drivers/lirc_dev/Makefile
config.status: creating drivers/lirc_gpio/Makefile
config.status: creating drivers/lirc_i2c/Makefile
config.status: creating drivers/lirc_igorplugusb/Makefile
config.status: creating drivers/lirc_ttusbir/Makefile
config.status: creating drivers/lirc_imon/Makefile
config.status: creating drivers/lirc_it87/Makefile
config.status: creating drivers/lirc_mceusb/Makefile
config.status: creating drivers/lirc_mceusb2/Makefile
config.status: creating drivers/lirc_parallel/Makefile
config.status: creating drivers/lirc_sasem/Makefile
config.status: creating drivers/lirc_serial/Makefile
config.status: creating drivers/lirc_sir/Makefile
config.status: creating drivers/lirc_streamzap/Makefile
config.status: creating daemons/Makefile
config.status: creating tools/Makefile
config.status: creating doc/Makefile
config.status: creating doc/man/Makefile
config.status: creating config.h
config.status: executing depfiles commands

Your hardware does not require a special LIRC kernel module.

Now enter 'make' and 'make install' to compile and install the package.

+ exit 0
Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.62844
+ umask 022
+ cd /build-lirc-i586/BUILD
+ cd lirc-0.8.2
+ make
make  all-recursive
make[1]: Entering directory `/build-lirc-i586/BUILD/lirc-0.8.2'
Making all in drivers
make[2]: Entering directory `/build-lirc-i586/BUILD/lirc-0.8.2/drivers'
make[3]: Entering directory `/build-lirc-i586/BUILD/lirc-0.8.2/drivers'
make[3]: Nothing to be done for `all-am'.
make[3]: Leaving directory `/build-lirc-i586/BUILD/lirc-0.8.2/drivers'
make[2]: Leaving directory `/build-lirc-i586/BUILD/lirc-0.8.2/drivers'
Making all in daemons
make[2]: Entering directory `/build-lirc-i586/BUILD/lirc-0.8.2/daemons'
source='irrecord.c' object='irrecord.o' libtool=no \
	depfile='.deps/irrecord.Po' tmpdepfile='.deps/irrecord.TPo' \
	depmode=gcc3 /bin/sh ../depcomp \
	gcc -DHAVE_CONFIG_H -I. -I. -I..     -O2 -march=i586 -mtune=i686 -fomit-frame-pointer -fweb -frename-registers  -c `test -f 'irrecord.c' || echo './'`irrecord.c
source='dump_config.c' object='dump_config.o' libtool=no \
	depfile='.deps/dump_config.Po' tmpdepfile='.deps/dump_config.TPo' \
	depmode=gcc3 /bin/sh ../depcomp \
	gcc -DHAVE_CONFIG_H -I. -I. -I..     -O2 -march=i586 -mtune=i686 -fomit-frame-pointer -fweb -frename-registers  -c `test -f 'dump_config.c' || echo './'`dump_config.c
source='config_file.c' object='config_file.o' libtool=no \
	depfile='.deps/config_file.Po' tmpdepfile='.deps/config_file.TPo' \
	depmode=gcc3 /bin/sh ../depcomp \
	gcc -DHAVE_CONFIG_H -I. -I. -I..     -O2 -march=i586 -mtune=i686 -fomit-frame-pointer -fweb -frename-registers  -c `test -f 'config_file.c' || echo './'`config_file.c
source='ir_remote.c' object='ir_remote.o' libtool=no \
	depfile='.deps/ir_remote.Po' tmpdepfile='.deps/ir_remote.TPo' \
	depmode=gcc3 /bin/sh ../depcomp \
	gcc -DHAVE_CONFIG_H -I. -I. -I..     -O2 -march=i586 -mtune=i686 -fomit-frame-pointer -fweb -frename-registers  -c `test -f 'ir_remote.c' || echo './'`ir_remote.c
source='hw-types.c' object='hw-types.o' libtool=no \
	depfile='.deps/hw-types.Po' tmpdepfile='.deps/hw-types.TPo' \
	depmode=gcc3 /bin/sh ../depcomp \
	gcc -DHAVE_CONFIG_H -I. -I. -I..     -O2 -march=i586 -mtune=i686 -fomit-frame-pointer -fweb -frename-registers  -c `test -f 'hw-types.c' || echo './'`hw-types.c
source='release.c' object='release.o' libtool=no \
	depfile='.deps/release.Po' tmpdepfile='.deps/release.TPo' \
	depmode=gcc3 /bin/sh ../depcomp \
	gcc -DHAVE_CONFIG_H -I. -I. -I..     -O2 -march=i586 -mtune=i686 -fomit-frame-pointer -fweb -frename-registers  -c `test -f 'release.c' || echo './'`release.c
source='hw_accent.c' object='hw_accent.o' libtool=no \
	depfile='.deps/hw_accent.Po' tmpdepfile='.deps/hw_accent.TPo' \
	depmode=gcc3 /bin/sh ../depcomp \
	gcc -DHAVE_CONFIG_H -I. -I. -I..     -O2 -march=i586 -mtune=i686 -fomit-frame-pointer -fweb -frename-registers  -c `test -f 'hw_accent.c' || echo './'`hw_accent.c
source='hw_alsa_usb.c' object='hw_alsa_usb.o' libtool=no \
	depfile='.deps/hw_alsa_usb.Po' tmpdepfile='.deps/hw_alsa_usb.TPo' \
	depmode=gcc3 /bin/sh ../depcomp \
	gcc -DHAVE_CONFIG_H -I. -I. -I..     -O2 -march=i586 -mtune=i686 -fomit-frame-pointer -fweb -frename-registers  -c `test -f 'hw_alsa_usb.c' || echo './'`hw_alsa_usb.c
source='hw_atilibusb.c' object='hw_atilibusb.o' libtool=no \
	depfile='.deps/hw_atilibusb.Po' tmpdepfile='.deps/hw_atilibusb.TPo' \
	depmode=gcc3 /bin/sh ../depcomp \
	gcc -DHAVE_CONFIG_H -I. -I. -I..     -O2 -march=i586 -mtune=i686 -fomit-frame-pointer -fweb -frename-registers  -c `test -f 'hw_atilibusb.c' || echo './'`hw_atilibusb.c
source='hw_audio.c' object='hw_audio.o' libtool=no \
	depfile='.deps/hw_audio.Po' tmpdepfile='.deps/hw_audio.TPo' \
	depmode=gcc3 /bin/sh ../depcomp \
	gcc -DHAVE_CONFIG_H -I. -I. -I..     -O2 -march=i586 -mtune=i686 -fomit-frame-pointer -fweb -frename-registers  -c `test -f 'hw_audio.c' || echo './'`hw_audio.c
hw_audio.c:69: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
hw_audio.c:93: error: expected declaration specifiers or '...' before 'PaTimestamp'
hw_audio.c: In function 'recordCallback':
hw_audio.c:106: error: 'outTime' undeclared (first use in this function)
hw_audio.c:106: error: (Each undeclared identifier is reported only once
hw_audio.c:106: error: for each function it appears in.)
hw_audio.c: In function 'audio_init':
hw_audio.c:243: error: 'stream' undeclared (first use in this function)
hw_audio.c:257: warning: passing argument 2 of 'Pa_OpenStream' makes pointer from integer without a cast
hw_audio.c:257: warning: passing argument 3 of 'Pa_OpenStream' makes pointer from integer without a cast
hw_audio.c:257: warning: passing argument 5 of 'Pa_OpenStream' makes integer from pointer without a cast
hw_audio.c:257: warning: passing argument 8 of 'Pa_OpenStream' makes pointer from integer without a cast
hw_audio.c:257: error: too many arguments to function 'Pa_OpenStream'
hw_audio.c: In function 'audio_deinit':
hw_audio.c:314: error: 'stream' undeclared (first use in this function)
make[2]: *** [hw_audio.o] Error 1
make[2]: Leaving directory `/build-lirc-i586/BUILD/lirc-0.8.2/daemons'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/build-lirc-i586/BUILD/lirc-0.8.2'
make: *** [all] Error 2
error: Bad exit status from /var/tmp/rpm-tmp.62844 (%build)


RPM build errors:
    user arklinux does not exist - using root
    group arklinux does not exist - using root
    user arklinux does not exist - using root
    group arklinux does not exist - using root
    user arklinux does not exist - using root
    group arklinux does not exist - using root
    user arklinux does not exist - using root
    group arklinux does not exist - using root
    Bad exit status from /var/tmp/rpm-tmp.62844 (%build)
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.