gcc failed on x86_64 dockyard-devel (c64.arklinux.org)

gcc failed to build on x86_64 for dockyard-devel.
Last 250 lines of build log:

	    cat ../../gcc/limitx.h ../../gcc/glimits.h ../../gcc/limity.h > tmp-xlimits.h; \
	  else \
	    cat ../../gcc/glimits.h > tmp-xlimits.h; \
	  fi; \
	  /bin/sh ../../gcc/../mkinstalldirs ${fix_dir}; \
	  chmod a+rx ${fix_dir} || true; \
	  rm -f ${fix_dir}/limits.h; \
	  mv tmp-xlimits.h ${fix_dir}/limits.h; \
	  chmod a+r ${fix_dir}/limits.h; \
	done
rm -f include-fixed/README
cp ../../gcc/../fixincludes/README-fixinc include-fixed/README
chmod a+r include-fixed/README
echo timestamp > stmp-int-hdrs
TARGET_CPU_DEFAULT="" \
	HEADERS="auto-host.h ansidecl.h" DEFINES="USED_FOR_TARGET " \
	/bin/sh ../../gcc/mkconfig.sh tconfig.h
cp ../../gcc/config/i386/sfp-machine.h sfp-machine.h
(echo "@set version-GCC 4.3.0"; \
	 if [ "experimental" = "experimental" ]; \
	 then echo "@set DEVELOPMENT"; \
	 else echo "@clear DEVELOPMENT"; \
	 fi) > gcc-vers.texiT
echo "@set srcdir ../../gcc" >> gcc-vers.texiT
if [ -n "(GCC) " ]; then \
	  echo "@set VERSION_PACKAGE (GCC) " >> gcc-vers.texiT; \
	fi
echo "@set BUGURL @uref{http://gcc.gnu.org/bugs.html}" >> gcc-vers.texiT; \
	mv -f gcc-vers.texiT gcc-vers.texi
if [ xinfo = xinfo ]; then \
		makeinfo --split-size=5000000 --split-size=5000000 --split-size=5000000 --no-split -I . -I ../../gcc/doc \
			-I ../../gcc/doc/include -o doc/cpp.info ../../gcc/doc/cpp.texi; \
	fi
if [ xinfo = xinfo ]; then \
		makeinfo --split-size=5000000 --split-size=5000000 --split-size=5000000 --no-split -I . -I ../../gcc/doc \
			-I ../../gcc/doc/include -o doc/gcc.info ../../gcc/doc/gcc.texi; \
	fi
if [ xinfo = xinfo ]; then \
		makeinfo --split-size=5000000 --split-size=5000000 --split-size=5000000 --no-split -I . -I ../../gcc/doc \
			-I ../../gcc/doc/include -o doc/gccint.info ../../gcc/doc/gccint.texi; \
	fi
if [ xinfo = xinfo ]; then \
		makeinfo --split-size=5000000 --split-size=5000000 --split-size=5000000 --no-split -I ../../gcc/doc \
			-I ../../gcc/doc/include -o doc/gccinstall.info ../../gcc/doc/install.texi; \
	fi
if [ xinfo = xinfo ]; then \
		makeinfo --split-size=5000000 --split-size=5000000 --split-size=5000000 --no-split -I . -I ../../gcc/doc \
			-I ../../gcc/doc/include -o doc/cppinternals.info ../../gcc/doc/cppinternals.texi; \
	fi
make ada/doctools/xgnatugn
make[4]: Entering directory `/build-gcc-x86_64/BUILD/gcc-4.3.0/build/gcc'
mkdir -p ada/doctools
cp -p ../../gcc/ada/xgnatugn.adb ada/doctools
cd ada/doctools && gnatmake -q xgnatugn
make[4]: Leaving directory `/build-gcc-x86_64/BUILD/gcc-4.3.0/build/gcc'
ada/doctools/xgnatugn unw ../../gcc/ada/gnat_ugn.texi \
	   ../../gcc/ada/ug_words doc/gnat_ugn_unw.texi

 NO Warnings
 NO Errors
if [ xinfo = xinfo ]; then \
	  rm -f doc/gnat_ugn_unw.info*; \
	  makeinfo --split-size=5000000 --split-size=5000000 --split-size=5000000 --no-split -I../../gcc/doc/include \
            -I../../gcc/ada -o doc/gnat_ugn_unw.info doc/gnat_ugn_unw.texi; \
	else true; fi
if [ xinfo = xinfo ]; then \
	  rm -f doc/gnat_rm.info*; \
	  makeinfo --split-size=5000000 --split-size=5000000 --split-size=5000000 --no-split -I../../gcc/doc/include \
            -I../../gcc/ada -o doc/gnat_rm.info ../../gcc/ada/gnat_rm.texi; \
	else true; fi
if [ xinfo = xinfo ]; then \
	  rm -f doc/gnat-style.info*; \
	  makeinfo --split-size=5000000 --split-size=5000000 --split-size=5000000 --no-split -I../../gcc/doc/include \
            -I../../gcc/ada -o doc/gnat-style.info ../../gcc/ada/gnat-style.texi; \
	else true; fi
echo timestamp > gcov.pod
perl ../../gcc/../contrib/texi2pod.pl -DBUGURL="@uref{http://gcc.gnu.org/bugs.html}" ../../gcc/doc/gcov.texi > gcov.pod
echo timestamp > doc/gcov.1
(pod2man --center="GNU" --release="gcc-4.3.0" --section=1 gcov.pod > doc/gcov.1.T$$ && \
		mv -f doc/gcov.1.T$$ doc/gcov.1) || \
		(rm -f doc/gcov.1.T$$ && exit 1)
echo timestamp > cpp.pod
perl ../../gcc/../contrib/texi2pod.pl -DBUGURL="@uref{http://gcc.gnu.org/bugs.html}" ../../gcc/doc/cpp.texi > cpp.pod
echo timestamp > doc/cpp.1
(pod2man --center="GNU" --release="gcc-4.3.0" --section=1 cpp.pod > doc/cpp.1.T$$ && \
		mv -f doc/cpp.1.T$$ doc/cpp.1) || \
		(rm -f doc/cpp.1.T$$ && exit 1)
echo timestamp > gcc.pod
perl ../../gcc/../contrib/texi2pod.pl ../../gcc/doc/invoke.texi > gcc.pod
echo timestamp > doc/gcc.1
(pod2man --center="GNU" --release="gcc-4.3.0" --section=1 gcc.pod > doc/gcc.1.T$$ && \
		mv -f doc/gcc.1.T$$ doc/gcc.1) || \
		(rm -f doc/gcc.1.T$$ && exit 1)
echo timestamp > gfdl.pod
perl ../../gcc/../contrib/texi2pod.pl ../../gcc/doc/include/fdl.texi > gfdl.pod
echo timestamp > doc/gfdl.7
(pod2man --center="GNU" --release="gcc-4.3.0" --section=7 gfdl.pod > doc/gfdl.7.T$$ && \
		mv -f doc/gfdl.7.T$$ doc/gfdl.7) || \
		(rm -f doc/gfdl.7.T$$ && exit 1)
echo timestamp > gpl.pod
perl ../../gcc/../contrib/texi2pod.pl -DBUGURL="@uref{http://gcc.gnu.org/bugs.html}" ../../gcc/doc/include/gpl.texi > gpl.pod
echo timestamp > doc/gpl.7
(pod2man --center="GNU" --release="gcc-4.3.0" --section=7 gpl.pod > doc/gpl.7.T$$ && \
		mv -f doc/gpl.7.T$$ doc/gpl.7) || \
		(rm -f doc/gpl.7.T$$ && exit 1)
echo timestamp > fsf-funding.pod
perl ../../gcc/../contrib/texi2pod.pl ../../gcc/doc/include/funding.texi > fsf-funding.pod
echo timestamp > doc/fsf-funding.7
(pod2man --center="GNU" --release="gcc-4.3.0" --section=7 fsf-funding.pod > doc/fsf-funding.7.T$$ && \
		mv -f doc/fsf-funding.7.T$$ doc/fsf-funding.7) || \
		(rm -f doc/fsf-funding.7.T$$ && exit 1)
rm gcov.pod fsf-funding.pod gfdl.pod gpl.pod cpp.pod gcc.pod
make[3]: Leaving directory `/build-gcc-x86_64/BUILD/gcc-4.3.0/build/gcc'
mkdir -p -- x86_64-ark-linux/libgcc
Checking multilib configuration for libgcc...
Configuring stage 1 in x86_64-ark-linux/libgcc
configure: creating cache ./config.cache
checking for --enable-version-specific-runtime-libs... no
checking for a BSD-compatible install... /usr/bin/install -c
checking for gawk... gawk
checking build system type... x86_64-ark-linux-gnu
checking host system type... x86_64-ark-linux-gnu
checking for x86_64-ark-linux-ar... x86_64-ark-linux-ar
checking for x86_64-ark-linux-lipo... lipo
checking for x86_64-ark-linux-nm... /build-gcc-x86_64/BUILD/gcc-4.3.0/build/./gcc/nm
checking for x86_64-ark-linux-ranlib... x86_64-ark-linux-ranlib
checking for x86_64-ark-linux-strip... x86_64-ark-linux-strip
checking whether ln -s works... yes
checking for x86_64-ark-linux-gcc... /build-gcc-x86_64/BUILD/gcc-4.3.0/build/./gcc/xgcc -B/build-gcc-x86_64/BUILD/gcc-4.3.0/build/./gcc/ -B/usr/x86_64-ark-linux/bin/ -B/usr/x86_64-ark-linux/lib/ -isystem /usr/x86_64-ark-linux/include -isystem /usr/x86_64-ark-linux/sys-include
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether /build-gcc-x86_64/BUILD/gcc-4.3.0/build/./gcc/xgcc -B/build-gcc-x86_64/BUILD/gcc-4.3.0/build/./gcc/ -B/usr/x86_64-ark-linux/bin/ -B/usr/x86_64-ark-linux/lib/ -isystem /usr/x86_64-ark-linux/include -isystem /usr/x86_64-ark-linux/sys-include accepts -g... yes
checking for /build-gcc-x86_64/BUILD/gcc-4.3.0/build/./gcc/xgcc -B/build-gcc-x86_64/BUILD/gcc-4.3.0/build/./gcc/ -B/usr/x86_64-ark-linux/bin/ -B/usr/x86_64-ark-linux/lib/ -isystem /usr/x86_64-ark-linux/include -isystem /usr/x86_64-ark-linux/sys-include option to accept ANSI C... none needed
checking how to run the C preprocessor... /build-gcc-x86_64/BUILD/gcc-4.3.0/build/./gcc/xgcc -B/build-gcc-x86_64/BUILD/gcc-4.3.0/build/./gcc/ -B/usr/x86_64-ark-linux/bin/ -B/usr/x86_64-ark-linux/lib/ -isystem /usr/x86_64-ark-linux/include -isystem /usr/x86_64-ark-linux/sys-include -E
checking whether decimal floating point is supported... yes
checking for __attribute__((visibility("hidden")))... yes
checking whether the target asssembler upports thread-local storage... yes
updating cache ./config.cache
configure: creating ./config.status
config.status: creating Makefile
config.status: executing default commands
Adding multilib support to Makefile in ../../../libgcc
multidirs=32
with_multisubdir=
Running configure in multilib subdirs 32
pwd: /build-gcc-x86_64/BUILD/gcc-4.3.0/build/x86_64-ark-linux/libgcc
Running configure in multilib subdir 32
pwd: /build-gcc-x86_64/BUILD/gcc-4.3.0/build/x86_64-ark-linux
mkdir 32
configure: creating cache ./config.cache
checking for --enable-version-specific-runtime-libs... no
checking for a BSD-compatible install... /usr/bin/install -c
checking for gawk... gawk
checking build system type... x86_64-ark-linux-gnu
checking host system type... x86_64-ark-linux-gnu
checking for x86_64-ark-linux-ar... x86_64-ark-linux-ar
checking for x86_64-ark-linux-lipo... lipo
checking for x86_64-ark-linux-nm... /build-gcc-x86_64/BUILD/gcc-4.3.0/build/./gcc/nm
checking for x86_64-ark-linux-ranlib... x86_64-ark-linux-ranlib
checking for x86_64-ark-linux-strip... x86_64-ark-linux-strip
checking whether ln -s works... yes
checking for x86_64-ark-linux-gcc... /build-gcc-x86_64/BUILD/gcc-4.3.0/build/./gcc/xgcc -B/build-gcc-x86_64/BUILD/gcc-4.3.0/build/./gcc/ -B/usr/x86_64-ark-linux/bin/ -B/usr/x86_64-ark-linux/lib/ -isystem /usr/x86_64-ark-linux/include -isystem /usr/x86_64-ark-linux/sys-include  -m32
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether /build-gcc-x86_64/BUILD/gcc-4.3.0/build/./gcc/xgcc -B/build-gcc-x86_64/BUILD/gcc-4.3.0/build/./gcc/ -B/usr/x86_64-ark-linux/bin/ -B/usr/x86_64-ark-linux/lib/ -isystem /usr/x86_64-ark-linux/include -isystem /usr/x86_64-ark-linux/sys-include  -m32 accepts -g... yes
checking for /build-gcc-x86_64/BUILD/gcc-4.3.0/build/./gcc/xgcc -B/build-gcc-x86_64/BUILD/gcc-4.3.0/build/./gcc/ -B/usr/x86_64-ark-linux/bin/ -B/usr/x86_64-ark-linux/lib/ -isystem /usr/x86_64-ark-linux/include -isystem /usr/x86_64-ark-linux/sys-include  -m32 option to accept ANSI C... none needed
checking how to run the C preprocessor... /lib/cpp
checking whether decimal floating point is supported... yes
checking for __attribute__((visibility("hidden")))... yes
checking whether the target asssembler upports thread-local storage... yes
updating cache ./config.cache
configure: creating ./config.status
config.status: creating Makefile
config.status: executing default commands
Adding multilib support to Makefile in ../../../../libgcc
with_multisubdir=32
make[3]: Entering directory `/build-gcc-x86_64/BUILD/gcc-4.3.0/build/x86_64-ark-linux/libgcc'
# If this is the top-level multilib, build all the other
# multilibs.
make[4]: Entering directory `/build-gcc-x86_64/BUILD/gcc-4.3.0/build/x86_64-ark-linux/libgcc'
if [ -z "32" ]; then \
	  true; \
	else \
	  rootpre=`${PWDCMD-pwd}`/; export rootpre; \
	  srcrootpre=`cd ../../../libgcc; ${PWDCMD-pwd}`/; export srcrootpre; \
	  lib=`echo ${rootpre} | sed -e 's,^.*/\([^/][^/]*\)/$,\1,'`; \
	  compiler="/build-gcc-x86_64/BUILD/gcc-4.3.0/build/./gcc/xgcc -B/build-gcc-x86_64/BUILD/gcc-4.3.0/build/./gcc/ -B/usr/x86_64-ark-linux/bin/ -B/usr/x86_64-ark-linux/lib/ -isystem /usr/x86_64-ark-linux/include -isystem /usr/x86_64-ark-linux/sys-include"; \
	  for i in `${compiler} --print-multi-lib 2>/dev/null`; do \
	    dir=`echo $i | sed -e 's/;.*$//'`; \
	    if [ "${dir}" = "." ]; then \
	      true; \
	    else \
	      if [ -d ../${dir}/${lib} ]; then \
		flags=`echo $i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
		if (cd ../${dir}/${lib}; make "AR=x86_64-ark-linux-ar" "AR_FLAGS=rc" "CC=/build-gcc-x86_64/BUILD/gcc-4.3.0/build/./gcc/xgcc -B/build-gcc-x86_64/BUILD/gcc-4.3.0/build/./gcc/ -B/usr/x86_64-ark-linux/bin/ -B/usr/x86_64-ark-linux/lib/ -isystem /usr/x86_64-ark-linux/include -isystem /usr/x86_64-ark-linux/sys-include" "CFLAGS=-g -fkeep-inline-functions" "DESTDIR=" "EXTRA_OFILES=" "HDEFINES=" "INSTALL=/usr/bin/install -c" "INSTALL_DATA=/usr/bin/install -c -m 644" "INSTALL_PROGRAM=/usr/bin/install -c" "LDFLAGS=" "LOADLIBES=" "RANLIB=x86_64-ark-linux-ranlib" "SHELL=/bin/sh" "prefix=/usr" "exec_prefix=/usr" "libdir=/usr/lib64" "libsubdir=/usr/lib64/gcc/x86_64-ark-linux/4.3.0" "tooldir=/usr/x86_64-ark-linux" \
				CFLAGS="-g -fkeep-inline-functions ${flags}" \
				CCASFLAGS=" ${flags}" \
				FCFLAGS=" ${flags}" \
				FFLAGS=" ${flags}" \
				ADAFLAGS=" ${flags}" \
				prefix="/usr" \
				exec_prefix="/usr" \
				GCJFLAGS=" ${flags}" \
				CXXFLAGS="-O2  -fweb -frename-registers -fno-strict-aliasing   -D_GNU_SOURCE ${flags}" \
				LIBCFLAGS="-g -fkeep-inline-functions ${flags}" \
				LIBCXXFLAGS="-O2  -fweb -frename-registers -fno-strict-aliasing   -D_GNU_SOURCE -fno-implicit-templates ${flags}" \
				LDFLAGS=" ${flags}" \
				MULTIFLAGS="${flags}" \
				DESTDIR="" \
				INSTALL="/usr/bin/install -c" \
				INSTALL_DATA="/usr/bin/install -c -m 644" \
				INSTALL_PROGRAM="/usr/bin/install -c" \
				INSTALL_SCRIPT="/usr/bin/install -c" \
				all); then \
		  true; \
		else \
		  exit 1; \
		fi; \
	      else true; \
	      fi; \
	    fi; \
	  done; \
	fi
make[5]: Entering directory `/build-gcc-x86_64/BUILD/gcc-4.3.0/build/x86_64-ark-linux/32/libgcc'
# If this is the top-level multilib, build all the other
# multilibs.
/build-gcc-x86_64/BUILD/gcc-4.3.0/build/./gcc/xgcc -B/build-gcc-x86_64/BUILD/gcc-4.3.0/build/./gcc/ -B/usr/x86_64-ark-linux/bin/ -B/usr/x86_64-ark-linux/lib/ -isystem /usr/x86_64-ark-linux/include -isystem /usr/x86_64-ark-linux/sys-include -g -fkeep-inline-functions -m32 -O2  -O2 -O2  -fweb -frename-registers -fno-strict-aliasing   -DIN_GCC    -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition  -isystem ./include  -fPIC -g -DHAVE_GTHR_DEFAULT -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED   -I. -I. -I../../.././gcc -I../../../../libgcc -I../../../../libgcc/. -I../../../../libgcc/../gcc -I../../../../libgcc/../include -I../../../../libgcc/config/libbid -DENABLE_DECIMAL_BID_FORMAT -DHAVE_CC_TLS -DUSE_TLS -o _muldi3.o -MT _muldi3.o -MD -MP -MF _muldi3.dep -DL_muld
 i3 -c ../../../../libgcc/../gcc/libgcc2.c \
	  -fvisibility=hidden -DHIDE_EXPORTS
In file included from /build-gcc-x86_64/BUILD/gcc-4.3.0/build/./gcc/include-fixed/features.h:354,
                 from /usr/include/stdio.h:28,
                 from ../../../../libgcc/../gcc/tsystem.h:90,
                 from ../../../../libgcc/../gcc/libgcc2.c:33:
/usr/include/gnu/stubs.h:7:27: error: gnu/stubs-32.h: No such file or directory
make[5]: *** [_muldi3.o] Error 1
make[5]: Leaving directory `/build-gcc-x86_64/BUILD/gcc-4.3.0/build/x86_64-ark-linux/32/libgcc'
make[4]: *** [multi-do] Error 1
make[4]: Leaving directory `/build-gcc-x86_64/BUILD/gcc-4.3.0/build/x86_64-ark-linux/libgcc'
make[3]: *** [all-multi] Error 2
make[3]: Leaving directory `/build-gcc-x86_64/BUILD/gcc-4.3.0/build/x86_64-ark-linux/libgcc'
make[2]: *** [all-stage1-target-libgcc] Error 2
make[2]: Leaving directory `/build-gcc-x86_64/BUILD/gcc-4.3.0/build'
make[1]: *** [stage1-bubble] Error 2
make[1]: Leaving directory `/build-gcc-x86_64/BUILD/gcc-4.3.0/build'
make: *** [bootstrap] Error 2
error: Bad exit status from /var/tmp/rpm-tmp.39879 (%build)


RPM build errors:
    user arklinux does not exist - using root
    Bad exit status from /var/tmp/rpm-tmp.39879 (%build)