kernel failed on x86_64 dockyard-devel (c64.arklinux.org)

kernel failed to build on x86_64 for dockyard-devel.
Last 250 lines of build log:

Installing kernel-2.6.23-0.rc6.2ark.src.rpm
Building target platforms: x86_64
Building for target x86_64
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.57041
+ umask 022
+ cd /build-kernel-x86_64/BUILD
+ cd /build-kernel-x86_64/BUILD
+ rm -rf linux-2.6.22
+ /usr/bin/bzip2 -dc /usr/src/ark/SOURCES/linux-2.6.22.tar.bz2
+ tar -xf -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd linux-2.6.22
+ tar -xf /usr/src/ark/SOURCES/rt2400-20070822.tar.lz
+ tar -xf /usr/src/ark/SOURCES/rt2500-20070822.tar.lz
+ tar -xf /usr/src/ark/SOURCES/rt2570-20070822.tar.lz
+ tar -xf /usr/src/ark/SOURCES/rt61-20070822.tar.lz
+ tar -xf /usr/src/ark/SOURCES/rt73-20070822.tar.lz
+ tar -xf /usr/src/ark/SOURCES/rt2x00-20070822.tar.lz
+ tar -xf /usr/src/ark/SOURCES/dadwifi-openhal-2592.tar.lz
+ /usr/bin/bzip2 -dc /usr/src/ark/SOURCES/rtl-mac80211-20070729.tar.bz2
+ tar -xf -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ tar -xf /usr/src/ark/SOURCES/orinoco-20060409.tar.lz
+ tar -xf /usr/src/ark/SOURCES/ndiswrapper-driver-1.49rc1.tar.lz
+ tar -xf /usr/src/ark/SOURCES/linux-fbdev-kernel-src_2.6.00.03a.tar.lz
+ tar -xf /usr/src/ark/SOURCES/v4l-dvb-20070924.tar.lz
+ tar -xf /usr/src/ark/SOURCES/gspcav1-20070508.tar.lz
+ /usr/bin/bzip2 -dc /usr/src/ark/SOURCES/zc030x-20050819.tar.bz2
+ tar -xf -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ tar -xf /usr/src/ark/SOURCES/ov51x-jpeg-1.5.2.tar.lz
+ tar -xf /usr/src/ark/SOURCES/linux-uvc-125.tar.lz
+ /usr/bin/bzip2 -dc /usr/src/ark/SOURCES/sqcam-20060125.tar.bz2
+ tar -xf -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ tar -xf /usr/src/ark/SOURCES/qc-usb-0.6.5.tar.lz
+ tar -xf /usr/src/ark/SOURCES/qc-usb-messenger-1.6.tar.lz
+ tar -xf /usr/src/ark/SOURCES/nw802-2.4-20070915.tar.lz
+ /usr/bin/bzip2 -dc /usr/src/ark/SOURCES/oss-v4.1test0-070717-src-gpl.tar.bz2
+ tar -xf -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ tar -xf /usr/src/ark/SOURCES/aufs-20070914.tar.lz
+ tar -xf /usr/src/ark/SOURCES/thinkpad_6.0.tar.lz
+ tar -xf /usr/src/ark/SOURCES/acer_acpi-0.7.tar.lz
+ tar -xf /usr/src/ark/SOURCES/omnibook-261.tar.lz
+ tar -xf /usr/src/ark/SOURCES/lirc-drivers-0.8.2.tar.lz
+ tar -xf /usr/src/ark/SOURCES/kqemu-1.3.0pre11.tar.lz
++ /usr/bin/id -u
+ '[' 0 = 0 ']'
+ /bin/chown -Rhf root .
++ /usr/bin/id -u
+ '[' 0 = 0 ']'
+ /bin/chgrp -Rhf root .
+ /bin/chmod -Rf a+rX,g-w,o-w .
++ pwd
+ TOP=/build-kernel-x86_64/BUILD/linux-2.6.22
+ echo 'Patch #0 (patch-2.6.23-rc6.bz2):'
Patch #0 (patch-2.6.23-rc6.bz2):
+ /usr/bin/bzip2 -d
+ patch -p1 -b --suffix .pre~ -s
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ echo 'Patch #1 (2.6.23-rc6-mm1.bz2):'
Patch #1 (2.6.23-rc6-mm1.bz2):
+ /usr/bin/bzip2 -d
+ patch -p1 -b --suffix .mmac~ -s
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ echo 'Patch #2 (build-failure-on-ppc64-drivers-net-ehea-ehea_mainc.patch):'
Patch #2 (build-failure-on-ppc64-drivers-net-ehea-ehea_mainc.patch):
+ patch -p1 -b --suffix .hf1~ -s
+ echo 'Patch #3 (fix-3-gregkh-driver-kobject-remove-the-static-array-for-the-name.patch):'
Patch #3 (fix-3-gregkh-driver-kobject-remove-the-static-array-for-the-name.patch):
+ patch -p1 -b --suffix .hf2~ -s
+ echo 'Patch #4 (ipc-integrate-ipc_checkid-into-ipc_lock-fix-2.patch):'
Patch #4 (ipc-integrate-ipc_checkid-into-ipc_lock-fix-2.patch):
+ patch -p1 -b --suffix .hf3~ -s
+ echo 'Patch #6 (2.6.23-rc6-mm1-kvm-compile.patch):'
Patch #6 (2.6.23-rc6-mm1-kvm-compile.patch):
+ patch -p1 -b --suffix .compilefix~ -s
+ echo 'Patch #100 (2.6.17-rc4-mm3-header-sanity.patch):'
Patch #100 (2.6.17-rc4-mm3-header-sanity.patch):
+ patch -p1 -b --suffix .headersanity~ -s
+ echo 'Patch #130 (ipaq-0.6-olivier.patch):'
Patch #130 (ipaq-0.6-olivier.patch):
+ patch -p1 -b --suffix .ipaq~ -s
+ echo 'Patch #140 (2.6.23-rc4-compilefixes.patch):'
Patch #140 (2.6.23-rc4-compilefixes.patch):
+ patch -p1 -b --suffix .compile~ -s
+ echo 'Patch #151 (linux-2.6.23-no-s390.patch):'
Patch #151 (linux-2.6.23-no-s390.patch):
+ patch -p1 -b --suffix .no-s390~ -s
+ echo 'Patch #152 (2.6.23-rc6-mm1-no-s390.patch):'
Patch #152 (2.6.23-rc6-mm1-no-s390.patch):
+ patch -p1 -b --suffix .no-s390-1~ -s
+ echo 'Patch #160 (linux-2.6.12-no-mac.patch):'
Patch #160 (linux-2.6.12-no-mac.patch):
+ patch -p1 -b --suffix .nomac~ -s
+ echo 'Patch #170 (for-mm-only-remove-remap_page_range-completely.patch):'
Patch #170 (for-mm-only-remove-remap_page_range-completely.patch):
+ patch -p1 -b --suffix .remap_page_range~ -R -s
+ echo 'Patch #180 (2.6.20-no-tileblitting-dep.patch):'
Patch #180 (2.6.20-no-tileblitting-dep.patch):
+ patch -p1 -b --suffix .deps~ -s
+ echo 'Patch #190 (shuttle-pn31.patch):'
Patch #190 (shuttle-pn31.patch):
+ patch -p1 -b --suffix .pn31~ -s
+ echo 'Patch #200 (2.6.15-clockspeed.patch):'
Patch #200 (2.6.15-clockspeed.patch):
+ patch -p1 -b --suffix .clockspeed~ -s
+ echo 'Patch #210 (2.6.18-rc5-mm1-8139cp-no-10ec-8139.patch):'
Patch #210 (2.6.18-rc5-mm1-8139cp-no-10ec-8139.patch):
+ patch -p1 -b --suffix .8139cp~ -s
+ echo 'Patch #230 (usb-storage-no-ide-dep.patch):'
Patch #230 (usb-storage-no-ide-dep.patch):
+ patch -p1 -b --suffix .usbide~ -s
+ echo 'Patch #240 (2.6.18-rc4-mm1-install-v4l1.patch):'
Patch #240 (2.6.18-rc4-mm1-install-v4l1.patch):
+ patch -p1 -b --suffix .v4l1~ -s
+ echo 'Patch #400 (linux-2.6.22-wistron-Medion-WIM2160.patch):'
Patch #400 (linux-2.6.22-wistron-Medion-WIM2160.patch):
+ patch -p1 -b --suffix .medion~ -s
+ echo 'Patch #410 (medion-wim2160-sound-try2.patch):'
Patch #410 (medion-wim2160-sound-try2.patch):
+ patch -p1 -b --suffix .wim2160snd~ -s
+ sed -i -e /endmenu/d drivers/net/wireless/Kconfig
+ echo 'Patch #1000 (acx-mac80211-20070718.patch.bz2):'
Patch #1000 (acx-mac80211-20070718.patch.bz2):
+ /usr/bin/bzip2 -d
+ patch -p0 -b --suffix .acx~ -s
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ mv drivers/net/wireless/mac80211/acx drivers/net/wireless
+ rmdir drivers/net/wireless/mac80211
+ cat
+ echo 'obj-$(CONFIG_ACX_MAC80211)	+= acx/'
+ echo 'Patch #1001 (acx-mm-api.patch):'
Patch #1001 (acx-mm-api.patch):
+ patch -p1 -b --suffix .acxmm~ -s
+ mv rt2400/Module drivers/net/wireless/rt2400
+ echo 'obj-$(CONFIG_RT2400)	+= rt2400/'
+ cat
+ cat
+ rm -rf rt2400
+ mv rt2500/Module drivers/net/wireless/rt2500
+ echo 'obj-$(CONFIG_RT2500)	+= rt2500/'
+ cat
+ cat
+ rm -rf rt2500
+ mv rt2570/Module drivers/net/wireless/rt2570
+ echo 'obj-$(CONFIG_RT2500)	+= rt2570/'
+ cat
+ cat
+ rm -rf rt2570
+ mv rt61/Module drivers/net/wireless/rt61
+ echo 'obj-$(CONFIG_RT61)	+= rt61/'
+ cat
+ cat
+ sed -i -e s,/etc/Wireless/RT61STA/,/usr/lib/hotplug/firmware/,g drivers/net/wireless/rt61/rt_config.h
+ rm -rf rt61
+ mv rt73/Module drivers/net/wireless/rt73
+ cd drivers/net/wireless/rt73
+ chmod -x CVS Makefile TESTING assoc.c auth.c auth_rsp.c connect.c iwpriv_usage.txt md5.c md5.h mlme.c mlme.h oid.h rt2x00debug.h rt73.bin rt73.h rt_config.h rtmp.h rtmp_def.h rtmp_info.c rtmp_init.c rtmp_main.c rtmp_tkip.c rtmp_type.h rtmp_wep.c rtusb_bulk.c rtusb_data.c rtusb_io.c sanity.c sync.c wpa.c wpa.h
+ rm Makefile iwpriv_usage.txt
+ dos2unix assoc.c auth.c auth_rsp.c connect.c md5.c mlme.c rtmp_info.c rtmp_init.c rtmp_main.c rtmp_tkip.c rtmp_wep.c rtusb_bulk.c rtusb_data.c rtusb_io.c sanity.c sync.c wpa.c md5.h mlme.h oid.h rt2x00debug.h rt73.h rt_config.h rtmp.h rtmp_def.h rtmp_type.h wpa.h
/var/tmp/rpm-tmp.57041: line 262: dos2unix: command not found
error: Bad exit status from /var/tmp/rpm-tmp.57041 (%prep)


RPM build errors:
    Bad exit status from /var/tmp/rpm-tmp.57041 (%prep)