Re: FC5 install and device mapper issue

( sorry things got messed up in my previous email )


> > If you boot the FC5 cd and type linux rescue, can you post the output of # dmraid -ay and # fdisk -l /dev/mapper/isw_hgbhgbbcd commands?
>
> The first time I run :
> # dmraid -ay  :
> RAID set "isw_hgbhgbbcd_Volume0" already active
> RAID set "isw_hgbhgbbcd_Volume1" already active
> The second time , I get
>  # dmraid -ay  :
> RAID set "isw_hgbhgbbcd_Volume0" already active
> RAID set "isw_hgbhgbbcd_Volume1" already active
> RAID set "isw_hgbhgbbcd_Volume01" already active
> ----------------------------------------------------------------------------------------------------------------------------------
> # fdisk -l /dev/mapper/isw_hgbhgbbcd_Volume0
> Disk /dev/mapper/isw_hgbhgbbcd_Volume0: 161.0 GB, 161061538816 bytes
> 255 heads, 63 sectors/track, 19581 cylinders
> Units = cylinders of 16065 * 512 = 8225280 bytes
>
>                              Device Boot      Start         End
> Blocks   Id  System
> /dev/mapper/isw_hgbhgbbcd_Volume0p1   *           1        5222
> 41945683+   7  HPFS/NTFS
> /dev/mapper/isw_hgbhgbbcd_Volume0p2            5223       19928
> 118125945    f  W95 Ext'd (LBA)
> --------------------------------------------------------------------------------------------------------------------------------
> # fdisk -l /dev/mapper/isw_hgbhgbbcd_Volume1
> Disk /dev/mapper/isw_hgbhgbbcd_Volume1: 166.7 GB, 166786763776 bytes
> 255 heads, 63 sectors/track, 20277 cylinders
> Units = cylinders of 16065 * 512 = 8225280 bytes
> ----------------------------------------------------------------------------------------------------------------------------------
> # fdisk -l /dev/mapper/isw_hgbhgbbcd_Volume01
>
> Disk /dev/mapper/isw_hgbhgbbcd_Volume01: 42.9 GB, 42952379904 bytes
> 255 heads, 63 sectors/track, 5221 cylinders
> Units = cylinders of 16065 * 512 = 8225280 bytes
>
> This doesn't look like a partition table
> Probably you selected the wrong device.
>
>                               Device Boot      Start         End
> Blocks   Id  System
> /dev/mapper/isw_hgbhgbbcd_Volume01p1   ?      119529      232583
> 908105142   74  Unknown
> Partition 1 does not end on cylinder boundary.
> /dev/mapper/isw_hgbhgbbcd_Volume01p2   ?      119534      224381
> 842184976   70  DiskSecure Multi-Boot
> Partition 2 does not end on cylinder boundary.
> /dev/mapper/isw_hgbhgbbcd_Volume01p3   ?       10497       10497
>     0   72  Unknown
> Partition 3 does not end on cylinder boundary.
> /dev/mapper/isw_hgbhgbbcd_Volume01p4          160318      160321
> 24404    0  Empty
> Partition 4 does not end on cylinder boundary.
>
> Partition table entries are not in disk order
> -------------------------------------------------------------------------------------------------------------------------------------
>
>
> note I don't intend to use software raid in fc5 anyway for the moment
>
> hicham
>