Intel Matrix Raid 1

Hi there,

I am trying to install Kubuntu Edgy to my machine with an Intel 82801GR/GH SATA RAID Controller. I have two disks and would like to install as raid 1.
Following the documents/howto-s found on the net I am trying the following:

 During install I exit to a shell and try to load dmraid. I install the following packages:

lsb-base_3.1-10ubuntu4_all.deb
libselinux1_1.30-1_i386.deb
checkpolicy_1.10-1_i386.deb
libdevmapper1.02-udeb_1.02.08-1_i386.udeb
dmraid-udeb_1.0.0.rc13-2ubuntu1_i386.udeb

When everything is installed i run 'dmraid -ay -i -v -d' and I get the following output:

DEBUG: _find_set: searching isw_dafaddhbif
DEBUG: _find_set: not found isw_dafaddhbif
DEBUG: _find_set: searching isw_dafaddhbif_WinVol
DEBUG: _find_set: searching isw_dafaddhbif_WinVol
DEBUG: _find_set: not found isw_dafaddhbif_WinVol
DEBUG: _find_set: not found isw_dafaddhbif_WinVol
DEBUG: _find_set: searching isw_dafaddhbif_LinVol
DEBUG: _find_set: searching isw_dafaddhbif_LinVol
DEBUG: _find_set: searching isw_dafaddhbif_LinVol
DEBUG: _find_set: not found isw_dafaddhbif_LinVol
DEBUG: _find_set: not found isw_dafaddhbif_LinVol
DEBUG: _find_set: not found isw_dafaddhbif_LinVol
DEBUG: _find_set: searching isw_dafaddhbif
DEBUG: _find_set: found isw_dafaddhbif
DEBUG: _find_set: searching isw_dafaddhbif_WinVol
DEBUG: _find_set: searching isw_dafaddhbif_WinVol
DEBUG: _find_set: found isw_dafaddhbif_WinVol
DEBUG: _find_set: found isw_dafaddhbif_WinVol
DEBUG: _find_set: searching isw_dafaddhbif_LinVol
DEBUG: _find_set: searching isw_dafaddhbif_LinVol
DEBUG: _find_set: found isw_dafaddhbif_LinVol
DEBUG: _find_set: found isw_dafaddhbif_LinVol
DEBUG: checking isw device "/dev/sdb"
DEBUG: checking isw device "/dev/sdc"
DEBUG: set status of set "isw_dafaddhbif_WinVol" to 16
DEBUG: checking isw device "/dev/sdb"
DEBUG: checking isw device "/dev/sdc"
DEBUG: set status of set "isw_dafaddhbif_LinVol" to 16
DEBUG: set status of set "isw_dafaddhbif" to 16
isw_dafaddhbif_WinVol: 0 136314880 mirror core 2 131072 nosync 2 /dev/sdb 0 /dev/sdc 0
isw_dafaddhbif_LinVol: 0 351956992 mirror core 2 131072 nosync 2 /dev/sdb 136318976 /dev/sdc 136318976
INFO: Activating GROUP RAID set "isw_dafaddhbif"
DEBUG: freeing devices of RAID set "isw_dafaddhbif_WinVol"
DEBUG: freeing device "isw_dafaddhbif_WinVol", path "/dev/sdb"
DEBUG: freeing device "isw_dafaddhbif_WinVol", path "/dev/sdc"
DEBUG: freeing devices of RAID set "isw_dafaddhbif_LinVol"
DEBUG: freeing device "isw_dafaddhbif_LinVol", path "/dev/sdb"
DEBUG: freeing device "isw_dafaddhbif_LinVol", path "/dev/sdc"
DEBUG: freeing devices of RAID set "isw_dafaddhbif"
DEBUG: freeing device "isw_dafaddhbif", path "/dev/sdb"
DEBUG: freeing device "isw_dafaddhbif", path "/dev/sdc"

So, it seems as it finds my volumes and sets them up and then frees them. As such, I don't get any /dev/mapper setup which I could use for the install. Can anybody help me out? What is status 16? Why is freeing the device? There is no error in the messages log (dmesg).

thanks,
Attila

ps: before I found this list I found a web-based newsgroup at "http://groups.archivesat.com/ATA_RAID/thread304167.htm" which allowed me to post. If that post and this mail goes to the same list I apologize.




 
____________________________________________________________________________________
TV dinner still cooling? 
Check out "Tonight's Picks" on Yahoo! TV.
http://tv.yahoo.com/

_______________________________________________
Ataraid-list mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/ataraid-list