Re: BIOS say ''rebuild" but drive seems to keep being desynchronized
Adam Cécile <[email protected]>
| Newsgroups | gmane.linux.ataraid |
|---|---|
| Message-ID | <[email protected]> |
No I didn't, isn't rebuild supposed to continue after starting linux ? Phillip Susi a écrit : > Adam Cécile wrote: >> Hello, >> >> I set up a RAID1 array on a sunfire x2200 (nvidia raid controller), >> running Debian Etch, dmraid version 1.0.0.rc13-2, kernel 2.6.18. >> I replaced one drive (testing purpose) and asked the controller to >> rebuild the array with this drive (through the nvidia raid bios). >> >> However, some days later, the BIOS controller still say "status: >> rebuild". > > Did you let the bios finish resynchronizing before rebooting? This > should have taken a good while on the order of an hour. > > _______________________________________________ > Ataraid-list mailing list > [email protected] > https://www.redhat.com/mailman/listinfo/ataraid-list -- Adam CECILE Linbox / Free&ALter Soft 152 rue de Grigy tél: +33 3 87 50 87 95 Technopôle Metz 2000 fax: +33 3 87 75 19 26 57070 METZ - France http://www.linbox.com