>>>>> "Christian" == Christian Jönsson <[email protected]> writes:
Christian> Is there anyone here that has experience of running Aurora SPARC Linux
Christian> on system's equipped with ROSS hyperSPARC processors?
Christian> I have two dual ROSS 125 MHz that I am not sure if they work at all,
Christian> if they are "burnt", but I can't get 1.0 (Ansel) to work with them
Christian> plugged in.
Christian> If I have a UP superSPARC-II, it's fine with 2.4.20 UP kernel, dual
Christian> spuerSPARC-II, fine also, well, 0.32 was... with 2.4.18.. SMP kernel,
Christian> haven't tried 1.0 yet..
I'm presently running 0.4 on a SS20 with a pair of dual ross
hypersparc cpu's. I haven't yet had the time/courage to make the leap
to 1.0 though probably will soon.
Here is the content of /proc/cpuinfo for your reference:
cpu : ROSS HyperSparc RT625 or RT626
fpu : ROSS HyperSparc combined IU/FPU
promlib : Version 3 Revision 2
prom : 2.22
type : sun4m
ncpus probed : 4
ncpus active : 4
Cpu0Bogo : 99.73
Cpu1Bogo : 99.94
Cpu2Bogo : 99.94
Cpu3Bogo : 99.94
MMU type : ROSS HyperSparc
contexts : 4096
nocache total : 5242880
nocache used : 187904
CPU0 : online
CPU1 : online
CPU2 : online
CPU3 : online
Bruce
lmpx.com only provides a reader for public news (NNTP) servers. It is not
affiliated with the servers or forums shown here and is not responsible for
the content of articles, which is written by their respective authors.