Re: FLOSS-and-Linux-friendly weather stations?

FWIW I suggest just buying yourself an rtl-sdr.com dongle + antennas for $50 and
sniff around to see if you can find one in your local area.

IMHO rtl_433 is pretty much magic and supports decoding tons of wireless weather
stations. eg look for fineoffset wh* devices here:
  https://github.com/merbanan/rtl_433/tree/master/src/devices

rtl_433 can then export it via MQTT (open standard) to something like
homeassistant for a nice interface.

Mikey

On Fri, 2022-12-16 at 17:37 +1000, Paul Gear via linux-aus wrote:
> Hi folks,
> I'm looking to get a weather station for the family and don't really know
> where to start - I'm hoping some of you might have been down this road before.
> Thinking about what I would like to get out of a weather station, I came up
> with the following:
> Essentials
>  * dual indoor & outdoor stations
>  * metrics: temperature, humidity, rainfall
>  * can get data out via HTTP, FTP, or other standards-based protocol in a
>    sensible format like JSON, CSV, or plain text
>  * doesn't require a cloud service to operate
>  * wireless connection to outdoor unit
>  * 15 minute resolution
>  * accurate clock
> Nice to have
>  * solar power for outdoor unit
>  * metrics: wind speed & direction, barometric pressure, battery/solar levels
>  * self-emptying/no-reservoir rain gauge
>  * wireless connection to indoor unit
>  * 1 minute resolution
>  * (S)NTP client
>  * HTTP proxy support if it needs to make outbound connections to the Internet
>  * decent web interface
>  * option to contribute data to collaborative open data projects without
>    compromising privacy
> Anything else I should think about?  Am I dreamin' [1]?  I am assuming that I
> would put them on their own wireless SSID & VLAN with no access to anything
> but what I permit.
> What price should I expect to pay?  What brands are worth investigating or
> avoiding?  I'm in South-East Queensland, if that makes any difference to what
> temperature or humidity tolerances it needs.
> Thanks in advance,
> Paul
> [1] https://www.youtube.com/watch?v=dik_wnOE4dk
> _______________________________________________
> linux-aus mailing list
> [email protected]
> http://lists.linux.org.au/mailman/listinfo/linux-aus
> 
> To unsubscribe from this list, send a blank email to
> linux-aus-unsubscribe-cunTk1MwBs8iFSDQTTA3OBCuuivNXqWP@public.gmane.org

_______________________________________________
linux-aus mailing list
[email protected]
http://lists.linux.org.au/mailman/listinfo/linux-aus

To unsubscribe from this list, send a blank email to
linux-aus-unsubscribe-cunTk1MwBs8iFSDQTTA3OBCuuivNXqWP@public.gmane.org