Re: Inexpensive laptops (was: ARM laptops)

Les Kitchen via linux-aus <[email protected]>
Newsgroups gmane.linux.australia
Message-ID <[email protected]>
Hi MC!

On Sat, Oct 21, 2023, at 16:59, Mike Carden via linux-aus wrote:

> I'm typing this on a circa 2010 Lenovo X201 laptop which I
> bought second hand in late 2012. It has an Intel i5 M 580 (4)
> @ 2.667GHz CPU and 7728MiB of RAM. By modern standards it's a
> tad chunky, but its keyboard is perhaps still the best laptop
> keyboard ever made with proper full-throw keys.

Your post inspired me to reply on my Lenovo Thinkpad X200
(around 2008 vintage), though I first read it on my much newer
MNT Reform (see below).

I bought the X200 off a free-software buddy for $20, then spent
about $200 upgrading to 8G RAM and 500GB SSD and new 9-cell
battery.

I've had a similar experience: excellent keyboard (having real
PgUp, PgDn, etc., keys is a big win), easily swappable battery,
repairability.  A very nice machine for almost all everyday use.
I've even put in an ExpressCard to get USB3, though that works
only a fresh boot, and seems not to wake up properly after
hibernation, and I haven't had time to fix that.

I guess the overall comment is that one route for getting a
cheap laptop is to buy an old machine second-hand, and upgrade
the hardware as needed — if the design allows it, which is sadly
not true of most new laptops.  Russell's suggestion serves well
if you particularly need to work on ARM or even a particular SoC
like the RK3399 (Pinebook Pro) or RK3399S (PinePhone Pro).

In daily use I mainly cycle through four laptops: the
abovementioned Thinkpad X200; a 2007-vintage "Santa Rosa"
Macbook (black polycarbonate, hand-me-down from my son)
similarly upgraded; newer a Pinebook Pro (with 1TB NVMe
upgrade); and newest an MNT Reform (a very nice machine, with
very good keyboard and built-in trackball, but a much more
expensive proposition).  Running Debian on all but the Pinebook
Pro (Manjaro).  The older two machines have only 1280×800 displays,
but that serves well enough for most use.

Even though it's expensive, the MNT Reform is a very interesting
machine.  Besides the keyboard and trackball (and the very solid
construction with repairability in mind), of particular note is
that the CPU and RAM are on a daughterboard, and the machine
runs off a bank of eight standard 18650 LiFePO4 cells, instead
of a bespoke battery.  MNT are already selling daughterboards
with faster CPUs and more RAM.  Well worth looking into as a
machine with a long life (good for the environment) and with a
commitment to Free Software (good for everything ;-) ).

If you do want to keep running laptops of the age with easily
removable batteries, then I've found
https//www.betterbatt.com.au/ a very reliable source of
reasonably priced, third-party batteries.  No connection with
them aside from being a customer for over eight years.

And if you do want to keep such old laptops running with
up-to-date software, then pretty much the only option, as most
of you know, is to install some FOSS operating system, because
mainstream vendors drop software support after only a few years.
Such is the way of the world.

— Happy Hacking, Les.
_______________________________________________
linux-aus mailing list
[email protected]
http://lists.linux.org.au/mailman/listinfo/linux-aus

To unsubscribe from this list, send a blank email to
[email protected]
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.