Re: Trouble booting with mt8183 (google/kukui)

Yu-Ping Wu via coreboot <[email protected]>
Newsgroups gmane.linux.bios
Message-ID <CAFJq2TJNg3CrZ0TKsHWK0y1ntjgdm4WKxb8LO3qJ3k=8EmqPWg@mail.gmail.com>
Hi Jared,

MT8183 is able to boot from eMMC/UFS only (but not SPI-NOR). Therefore for
the Kukui Chromebook, we decided to emulate eMMC from EC (which contains
the bootblock). I guess the problem is that your EC doesn't contain a valid
bootblock. Did you ever flash an EC image to the Chromebook?

Did you modify any Kconfig options (in particular those related to
bootblock)? Please also double check if CONFIG_CONSOLE_SERIAL is enabled.

On Mon, Aug 14, 2023 at 7:02 PM Paul Menzel <[email protected]> wrote:

> [Cc: +Mediatek SOC maintainers]
>
> Dear Jared,
>
>
> Thank you for your message. I am sorry, nobody replied yet.
>
>
> Am 04.07.23 um 17:24 schrieb Jared Baur:
>
> > I am looking for some advice for configuring coreboot with a uImage
> > fit payload for an mt8183 chromebook (Kukui Fennel)? I have said
> > fitimage, I've modified the memlayout for the mt8183 board similar to
> >
> https://github.com/coreboot/coreboot/commit/22e605c2c06f553b98131a87b634709aa1818e1f
> > so that the fitimage fits in the cbfs and has space to load, and
> > coreboot successfully builds. I've also enabled a bunch of debug
> > settings for coreboot printing to serial. When flashing the ROM and
> > rebooting, the serial console doesn't show anything past bootrom
> > messages like so: >
> > ```
> > [DL] 00000000 00000000 010701
> >
> > F0: 102B 0000
> > F3: 1006 0033 [0200]
> > F3: 4001 00E0 [0200]
> > F3: 0000 0000
> > V0: 0000 0000 [0001]
> > 00: 1027 0002
> > 01: 0000 0000
> > BP: 0C00 0251 [0000]
> > G0: 1182 0000
> > EC: 0004 0000 [0001]
> > S7: 0000 0000 [0000]
> > CC: 0000 0000 [0001]
> > T0: 0000 00DB [000F]
> > Jump to BL
> > ```
> >
> > I am happy to post any configuration that would be helpful. I am
> > hoping to just get some serial output from coreboot at this point in
> > time, regardless of the payload.
> It’d be great, if you attached your configuration file and output of
> `build/cbfstool build/coreboot.rom print`.
>
>
> Kind regards,
>
> Paul
>


-- 

Yu-Ping Wu |  Software Engineer |  [email protected] |  +886 937 057 080

_______________________________________________
coreboot mailing list -- [email protected]
To unsubscribe send an email to [email protected]
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.