First time using coreboot+edk2, I didn't get to see the beginning.

Keith Hui <[email protected]>
Newsgroups gmane.linux.bios
Message-ID <CANTF=bTwgMrvW0FDAuG7QmOrufJo=zNM3+BoinSxDhH51kgcTQ@mail.gmail.com>
tldr: After my latest reflash of coreboot with edk2 payload, serial
log didn't start flowing right away and no on screen activity until OS
on drive has begun booting. What gives?

After hacking on coreboot with SeaBIOS for so long, I finally tried
edk2. It wasn't the smoothest transition.

My testing hard drive has a bit of special hackery done[1] in hope it
will boot under both legacy and UEFI schemes. I did add SeaBIOS as
secondary payload, and it couldn't boot. Then I pulled out the main
drive out of my laptop which is all UEFI, and it booted fine after
probably 30 seconds of nothing - the first thing I saw on screen is
the Fedora spinner. Nothing from edk2 or grub on the drive.

There also was a bit of delay on my connected serial console, then
when info finally started flowing, it's already well into ramstage.
And when I checked cbmem, it unfortunately overflowed so I lost logs
of raminit, which would be most important given my patch train now
under review. It would take a warm reboot before I start getting the
head of the boot logs.

I didn't set a boot logo.

What more set up I have to do to get my edk2 and grub boot menu back?

I've attached logs from minicom, cbmem, and my Kconfig, if it helps.

Thanks for any insights.
Keith

[1] If I remember correctly, it is GPT partitioned with ESP plus a
BIOS boot partition where grub can hide itself.

_______________________________________________
coreboot mailing list -- [email protected]
To unsubscribe send an email to [email protected]
minicom.log (text/x-log, 78.6 KB)
[DEBUG]  PNP: 002e.5 2a <- [0x0000000000000048 - 0x0000000000000047] size 0x00000000 gran 0x00 drq
[DEBUG]  PNP: 002e.5 22 <- [0x00000000000000d7 - 0x00000000000000d6] size 0x00000000 gran 0x00 drq
[DEBUG]  PNP: 002e.8 e0 <- [0x000000000000007f - 0x000000000000007e] size 0x00000000 gran 0x00 drq
[DEBUG]  PNP: 002e.8 e1 <- [0x0000000000000080 - 0x000000000000007f] size 0x00000000 gran 0x00 drq
[ERROR]  PNP: 002e.8 60 io size: 0x0000000008 not assigned in devicetree
[DEBUG]  PNP: 002e.a e7 <- [0x0000000000000011 - 0x0000000000000010] size 0x00000000 gran 0x00 drq
[DEBUG]  PNP: 002e.a f2 <- [0x000000000000005d - 0x000000000000005d] size 0x00000001 gran 0x00 drq
[DEBUG]  PNP: 002e.b 60 <- [0x0000000000000290 - 0x0000000000000291] size 0x00000002 gran 0x01 io
[DEBUG]  PNP: 002e.b 62 <- [0x0000000000000000 - 0x0000000000000001] size 0x00000002 gran 0x01 io
[DEBUG]  PNP: 002e.b e4 <- [0x00000000000000f9 - 0x00000000000000f8] size 0x00000000 gran 0x00 drq
[DEBUG]  PNP: 002e.b f0 <- [0x000000000000003e - 0x000000000000003e] size 0x00000001 gran 0x00 drq
[ERROR]  PNP: 002e.b 70 irq size: 0x0000000001 not assigned in devicetree
[DEBUG]  PNP: 002e.f e4 <- [0x00000000000000fc - 0x00000000000000fb] size 0x00000000 gran 0x00 drq
[DEBUG]  PNP: 002e.f e6 <- [0x000000000000007f - 0x000000000000007e] size 0x00000000 gran 0x00 drq
[DEBUG]  PNP: 002e.209 e0 <- [0x00000000000000bf - 0x00000000000000be] size 0x00000000 gran 0x00 drq
[DEBUG]  PNP: 002e.209 e1 <- [0x00000000000000c0 - 0x00000000000000bf] size 0x00000000 gran 0x00 drq
[DEBUG]  PNP: 002e.509 f4 <- [0x00000000000000fc - 0x00000000000000fc] size 0x00000001 gran 0x00 drq
[DEBUG]  PNP: 002e.509 f5 <- [0x00000000000000c4 - 0x00000000000000c4] size 0x00000001 gran 0x00 drq
[DEBUG]  PCI: 00:1f.2 10 <- [0x000000000000ef98 - 0x000000000000ef9f] size 0x00000008 gran 0x03 io
[DEBUG]  PCI: 00:1f.2 14 <- [0x000000000000ef8c - 0x000000000000ef8f] size 0x00000004 gran 0x02 io
[DEBUG]  PCI: 00:1f.2 18 <- [0x000000000000ef90 - 0x000000000000ef97] size 0x00000008 gran 0x03 io
[DEBUG]  PCI: 00:1f.2 1c <- [0x000000000000ef88 - 0x000000000000ef8b] size 0x00000004 gran 0x02 io
[DEBUG]  PCI: 00:1f.2 20 <- [0x000000000000efa0 - 0x000000000000efbf] size 0x00000020 gran 0x05 io
[DEBUG]  PCI: 00:1f.2 24 <- [0x00000000fdaeb000 - 0x00000000fdaeb7ff] size 0x00000800 gran 0x0b mem
[DEBUG]  PCI: 00:1f.3 10 <- [0x00000000fdae8000 - 0x00000000fdae80ff] size 0x00000100 gran 0x08 mem64
[INFO ]  Done setting resources.
[INFO ]  Done allocating resources.
[DEBUG]  BS: BS_DEV_RESOURCES run times (exec / console): 1 / 1104 ms
[INFO ]  Enabling resources...
[DEBUG]  PCI: 00:00.0 subsystem <- 1043/84ca
[DEBUG]  PCI: 00:00.0 cmd <- 06
[DEBUG]  PCI: 00:01.0 bridge ctrl <- 0013
[DEBUG]  PCI: 00:01.0 subsystem <- 1043/84ca
[DEBUG]  PCI: 00:01.0 cmd <- 00
[DEBUG]  PCI: 00:02.0 subsystem <- 1043/84ca
[DEBUG]  PCI: 00:02.0 cmd <- 03
[DEBUG]  PCI: 00:14.0 subsystem <- 1043/84ca
[DEBUG]  PCI: 00:14.0 cmd <- 102
[DEBUG]  PCI: 00:16.0 subsystem <- 1043/84ca
[DEBUG]  PCI: 00:16.0 cmd <- 02
[DEBUG]  PCI: 00:1a.0 subsystem <- 1043/84ca
[DEBUG]  PCI: 00:1a.0 cmd <- 102
[DEBUG]  PCI: 00:1b.0 subsystem <- 1043/84ca
[DEBUG]  PCI: 00:1b.0 cmd <- 102
[DEBUG]  PCI: 00:1c.0 bridge ctrl <- 0013
[DEBUG]  PCI: 00:1c.0 subsystem <- 1043/84ca
[DEBUG]  PCI: 00:1c.0 cmd <- 100
[DEBUG]  PCI: 00:1c.4 bridge ctrl <- 0013
[DEBUG]  PCI: 00:1c.4 subsystem <- 1043/84ca
[DEBUG]  PCI: 00:1c.4 cmd <- 100
[DEBUG]  PCI: 00:1c.5 bridge ctrl <- 0013
[DEBUG]  PCI: 00:1c.5 subsystem <- 1849/1e1a
[DEBUG]  PCI: 00:1c.5 cmd <- 107
[DEBUG]  PCI: 00:1c.6 bridge ctrl <- 0013
[DEBUG]  PCI: 00:1c.6 subsystem <- 1043/84ca
[DEBUG]  PCI: 00:1c.6 cmd <- 100
[DEBUG]  PCI: 00:1d.0 subsystem <- 1043/84ca
[DEBUG]  PCI: 00:1d.0 cmd <- 102
[DEBUG]  PCI: 00:1f.0 subsystem <- 1043/84ca
[DEBUG]  PCI: 00:1f.0 cmd <- 107
[DEBUG]  PCI: 00:1f.2 subsystem <- 1043/84ca
[DEBUG]  PCI: 00:1f.2 cmd <- 03
[DEBUG]  PCI: 00:1f.3 subsystem <- 1043/84ca
[DEBUG]  PCI: 00:1f.3 cmd <- 103
[DEBUG]  PCI: 04:00.0 subsystem <- 1043/84ca
[DEBUG]  PCI: 04:00.0 cmd <- 103
[DEBUG]  PCI: 05:00.0 bridge ctrl <- 0013
[DEBUG]  PCI: 05:00.0 cmd <- 00
[INFO ]  done.
[DEBUG]  BS: BS_DEV_ENABLE run times (exec / console): 1 / 139 ms
[INFO ]  Initializing devices...
[DEBUG]  CPU_CLUSTER: 0 init
[INFO ]  LAPIC 0x0 in XAPIC mode.
[DEBUG]  MTRR: Physical address space:
[DEBUG]  0x0000000000000000 - 0x000000000009ffff size 0x000a0000 type 6
[DEBUG]  0x00000000000a0000 - 0x00000000000bffff size 0x00020000 type 0
[DEBUG]  0x00000000000c0000 - 0x000000007fffffff size 0x7ff40000 type 6
[DEBUG]  0x0000000080000000 - 0x00000000dfffffff size 0x60000000 type 0
[DEBUG]  0x00000000e0000000 - 0x00000000efffffff size 0x10000000 type 1
[DEBUG]  0x00000000f0000000 - 0x00000000ffffffff size 0x10000000 type 0
[DEBUG]  0x0000000100000000 - 0x00000001705fffff size 0x70600000 type 6
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x250 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x258 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x259 0x0000000000000000
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x268 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x269 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26a 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26b 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26c 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26d 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26e 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26f 0x0606060606060606
[DEBUG]  apic_id 0x0 setup mtrr for CPU physical address size: 36 bits
[DEBUG]  MTRR: default type WB/UC MTRR counts: 4/3.
[DEBUG]  MTRR: UC selected as default type.
[DEBUG]  MTRR: 0 base 0x0000000000000000 mask 0x0000000f80000000 type 6
[DEBUG]  MTRR: 1 base 0x00000000e0000000 mask 0x0000000ff0000000 type 1
[DEBUG]  MTRR: 2 base 0x0000000100000000 mask 0x0000000f80000000 type 6

[DEBUG]  MTRR check
[DEBUG]  Fixed MTRRs   : Enabled
[DEBUG]  Variable MTRRs: Enabled

[DEBUG]  CPU has 4 cores, 8 threads enabled.
[DEBUG]  Setting up SMI for CPU
[INFO ]  Will perform SMM setup.
[DEBUG]  microcode: sig=0x306a9 pf=0x2 revision=0x21
[INFO ]  CBFS: Found 'cpu_microcode_blob.bin' @0x16bc0 size 0x6800 in mcache @0x7ffdd0ac
[INFO ]  CPU: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz.
[INFO ]  LAPIC 0x0 in XAPIC mode.
[DEBUG]  CPU: APIC: 00 enabled
[DEBUG]  CPU: APIC: 01 enabled
[DEBUG]  CPU: APIC: 02 enabled
[DEBUG]  CPU: APIC: 03 enabled
[DEBUG]  CPU: APIC: 04 enabled
[DEBUG]  CPU: APIC: 05 enabled
[DEBUG]  CPU: APIC: 06 enabled
[DEBUG]  CPU: APIC: 07 enabled
[DEBUG]  Loading module at 0x00030000 with entry 0x00030000. filesize: 0x178 memsize: 0x178
[DEBUG]  Processing 16 relocs. Offset value of 0x00030000
[DEBUG]  Attempting to start 7 APs
[DEBUG]  Waiting for 10ms after sending INIT.
[DEBUG]  Waiting for SIPI to complete...
[INFO ]  LAPIC 0x1 in XAPIC mode.
[DEBUG]  done.
[INFO ]  AP: slot 2 apic_id 1, MCU rev: 0x00000021
[DEBUG]  Waiting for SIPI to complete...
[DEBUG]  done.
[INFO ]  LAPIC 0x5 in XAPIC mode.
[INFO ]  LAPIC 0x4 in XAPIC mode.
[INFO ]  AP: slot 1 apic_id 5, MCU rev: 0x00000021
[INFO ]  LAPIC 0x2 in XAPIC mode.
[INFO ]  LAPIC 0x3 in XAPIC mode.
[INFO ]  AP: slot 6 apic_id 2, MCU rev: 0x00000021
[INFO ]  AP: slot 7 apic_id 3, MCU rev: 0x00000021
[INFO ]  LAPIC 0x6 in XAPIC mode.
[INFO ]  LAPIC 0x7 in XAPIC mode.
[INFO ]  AP: slot 4 apic_id 6, MCU rev: 0x00000021
[INFO ]  AP: slot 5 apic_id 7, MCU rev: 0x00000021
[INFO ]  AP: slot 3 apic_id 4, MCU rev: 0x00000021
[DEBUG]  Loading module at 0x00038000 with entry 0x00038000. filesize: 0x1a0 memsize: 0x1a0
[DEBUG]  Processing 9 relocs. Offset value of 0x00038000
[DEBUG]  smm_module_setup_stub: stack_top = 0x80002000
[DEBUG]  smm_module_setup_stub: per cpu stack_size = 0x400
[DEBUG]  smm_module_setup_stub: runtime.smm_size = 0x10000
[DEBUG]  SMM Module: stub loaded at 38000. Will call 0x7ffa41c3
[DEBUG]  Installing permanent SMM handler to 0x80000000
[DEBUG]  HANDLER      [0x802fe000-0x802ffcf0]

[DEBUG]  CPU 0
[DEBUG]    ss0        [0x802fdc00-0x802fe000]
[DEBUG]    stub0      [0x802f6000-0x802f61a0]

[DEBUG]  CPU 1
[DEBUG]    ss1        [0x802fd800-0x802fdc00]
[DEBUG]    stub1      [0x802f5c00-0x802f5da0]

[DEBUG]  CPU 2
[DEBUG]    ss2        [0x802fd400-0x802fd800]
[DEBUG]    stub2      [0x802f5800-0x802f59a0]

[DEBUG]  CPU 3
[DEBUG]    ss3        [0x802fd000-0x802fd400]
[DEBUG]    stub3      [0x802f5400-0x802f55a0]

[DEBUG]  CPU 4
[DEBUG]    ss4        [0x802fcc00-0x802fd000]
[DEBUG]    stub4      [0x802f5000-0x802f51a0]

[DEBUG]  CPU 5
[DEBUG]    ss5        [0x802fc800-0x802fcc00]
[DEBUG]    stub5      [0x802f4c00-0x802f4da0]

[DEBUG]  CPU 6
[DEBUG]    ss6        [0x802fc400-0x802fc800]
[DEBUG]    stub6      [0x802f4800-0x802f49a0]

[DEBUG]  CPU 7
[DEBUG]    ss7        [0x802fc000-0x802fc400]
[DEBUG]    stub7      [0x802f4400-0x802f45a0]

[DEBUG]  stacks       [0x80000000-0x80002000]
[DEBUG]  Loading module at 0x802fe000 with entry 0x802fe750. filesize: 0x1ca8 memsize: 0x1cf0
[DEBUG]  Processing 82 relocs. Offset value of 0x802fe000
[DEBUG]  Loading module at 0x802f6000 with entry 0x802f6000. filesize: 0x1a0 memsize: 0x1a0
[DEBUG]  Processing 9 relocs. Offset value of 0x802f6000
[DEBUG]  smm_module_setup_stub: stack_top = 0x80002000
[DEBUG]  smm_module_setup_stub: per cpu stack_size = 0x400
[DEBUG]  smm_module_setup_stub: runtime.smm_size = 0x300000
[DEBUG]  SMM Module: placing smm entry code at 802f5c00,  cpu # 0x1
[DEBUG]  SMM Module: placing smm entry code at 802f5800,  cpu # 0x2
[DEBUG]  SMM Module: placing smm entry code at 802f5400,  cpu # 0x3
[DEBUG]  SMM Module: placing smm entry code at 802f5000,  cpu # 0x4
[DEBUG]  SMM Module: placing smm entry code at 802f4c00,  cpu # 0x5
[DEBUG]  SMM Module: placing smm entry code at 802f4800,  cpu # 0x6
[DEBUG]  SMM Module: placing smm entry code at 802f4400,  cpu # 0x7
[DEBUG]  SMM Module: stub loaded at 802f6000. Will call 0x802fe750
[INFO ]  smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802ee000, cpu = 0
[DEBUG]  In relocation handler: cpu 0
[DEBUG]  New SMBASE=0x802ee000 IEDBASE=0x80400000
[DEBUG]  Writing SMRR. base = 0x80000006, mask=0xff800800
[DEBUG]  Relocation complete.
[INFO ]  smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802ed800, cpu = 2
[INFO ]  microcode: Update skipped, already up-to-date
[DEBUG]  In relocation handler: cpu 2
[DEBUG]  New SMBASE=0x802ed800 IEDBASE=0x80400000
[DEBUG]  Writing SMRR. base = 0x80000006, mask=0xff800800
[DEBUG]  Relocation complete.
[INFO ]  microcode: Update skipped, already up-to-date
[INFO ]  smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802edc00, cpu = 1
[DEBUG]  In relocation handler: cpu 1
[DEBUG]  New SMBASE=0x802edc00 IEDBASE=0x80400000
[DEBUG]  Writing SMRR. base = 0x80000006, mask=0xff800800
[DEBUG]  Relocation complete.
[INFO ]  smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802ed400, cpu = 3
[INFO ]  microcode: Update skipped, already up-to-date
[DEBUG]  In relocation handler: cpu 3
[DEBUG]  New SMBASE=0x802ed400 IEDBASE=0x80400000
[DEBUG]  Writing SMRR. base = 0x80000006, mask=0xff800800
[DEBUG]  Relocation complete.
[INFO ]  microcode: Update skipped, already up-to-date
[INFO ]  smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802ec800, cpu = 6
[DEBUG]  In relocation handler: cpu 6
[DEBUG]  New SMBASE=0x802ec800 IEDBASE=0x80400000
[DEBUG]  Writing SMRR. base = 0x80000006, mask=0xff800800
[DEBUG]  Relocation complete.
[INFO ]  smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802ec400, cpu = 7
[INFO ]  microcode: Update skipped, already up-to-date
[DEBUG]  In relocation handler: cpu 7
[DEBUG]  New SMBASE=0x802ec400 IEDBASE=0x80400000
[DEBUG]  Writing SMRR. base = 0x80000006, mask=0xff800800
[DEBUG]  Relocation complete.
[INFO ]  microcode: Update skipped, already up-to-date
[INFO ]  smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802ecc00, cpu = 5
[DEBUG]  In relocation handler: cpu 5
[DEBUG]  New SMBASE=0x802ecc00 IEDBASE=0x80400000
[DEBUG]  Writing SMRR. base = 0x80000006, mask=0xff800800
[DEBUG]  Relocation complete.
[INFO ]  smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802ed000, cpu = 4
[INFO ]  microcode: Update skipped, already up-to-date
[DEBUG]  In relocation handler: cpu 4
[DEBUG]  New SMBASE=0x802ed000 IEDBASE=0x80400000
[DEBUG]  Writing SMRR. base = 0x80000006, mask=0xff800800
[DEBUG]  Relocation complete.
[INFO ]  microcode: Update skipped, already up-to-date
[INFO ]  Initializing CPU #0
[DEBUG]  CPU: vendor Intel device 306a9
[DEBUG]  CPU: family 06, model 3a, stepping 09
[INFO ]  CPU: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz.
[INFO ]  CPU: platform id 1
[INFO ]  CPU: cpuid(1) 0x306a9
[INFO ]  CPU: AES supported
[INFO ]  CPU: TXT NOT supported
[INFO ]  CPU: VT supported
[DEBUG]  VMX status: enabled
[DEBUG]  IA32_FEATURE_CONTROL status: locked
[DEBUG]  cpu: energy policy set to 6
[DEBUG]  model_x06ax: frequency set to 3500
[INFO ]  Turbo is available but hidden
[INFO ]  Turbo is available and visible
[INFO ]  CPU #0 initialized
[INFO ]  Initializing CPU #2
[INFO ]  Initializing CPU #1
[INFO ]  Initializing CPU #3
[DEBUG]  CPU: vendor Intel device 306a9
[DEBUG]  CPU: family 06, model 3a, stepping 09
[DEBUG]  CPU: vendor Intel device 306a9
[DEBUG]  CPU: family 06, model 3a, stepping 09
[INFO ]  CPU: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz.
[INFO ]  CPU: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz.
[INFO ]  CPU: platform id 1
[INFO ]  CPU: platform id 1
[INFO ]  CPU: cpuid(1) 0x306a9
[INFO ]  CPU: cpuid(1) 0x306a9
[INFO ]  CPU: AES supported
[INFO ]  CPU: TXT NOT supported
[INFO ]  CPU: VT supported
[INFO ]  CPU: AES supported
[INFO ]  CPU: TXT NOT supported
[INFO ]  CPU: VT supported
[DEBUG]  VMX status: enabled
[DEBUG]  VMX status: enabled
[DEBUG]  IA32_FEATURE_CONTROL status: locked
[DEBUG]  IA32_FEATURE_CONTROL status: locked
[DEBUG]  cpu: energy policy set to 6
[DEBUG]  cpu: energy policy set to 6
[DEBUG]  model_x06ax: frequency set to 3500
[INFO ]  CPU #1 initialized
[DEBUG]  model_x06ax: frequency set to 3500
[INFO ]  CPU #3 initialized
[INFO ]  Initializing CPU #7
[INFO ]  Initializing CPU #6
[DEBUG]  CPU: vendor Intel device 306a9
[DEBUG]  CPU: family 06, model 3a, stepping 09
[DEBUG]  CPU: vendor Intel device 306a9
[DEBUG]  CPU: family 06, model 3a, stepping 09
[INFO ]  CPU: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz.
[INFO ]  CPU: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz.
[INFO ]  CPU: platform id 1
[INFO ]  CPU: platform id 1
[INFO ]  CPU: cpuid(1) 0x306a9
[INFO ]  CPU: cpuid(1) 0x306a9
[INFO ]  CPU: AES supported
[INFO ]  CPU: TXT NOT supported
[INFO ]  CPU: VT supported
[INFO ]  CPU: AES supported
[INFO ]  CPU: TXT NOT supported
[INFO ]  CPU: VT supported
[DEBUG]  VMX status: enabled
[DEBUG]  VMX status: enabled
[DEBUG]  IA32_FEATURE_CONTROL status: locked
[DEBUG]  IA32_FEATURE_CONTROL status: locked
[DEBUG]  cpu: energy policy set to 6
[DEBUG]  cpu: energy policy set to 6
[DEBUG]  model_x06ax: frequency set to 3500
[DEBUG]  model_x06ax: frequency set to 3500
[INFO ]  CPU #7 initialized
[INFO ]  CPU #6 initialized
[DEBUG]  CPU: vendor Intel device 306a9
[DEBUG]  CPU: family 06, model 3a, stepping 09
[INFO ]  Initializing CPU #4
[INFO ]  Initializing CPU #5
[DEBUG]  CPU: vendor Intel device 306a9
[DEBUG]  CPU: family 06, model 3a, stepping 09
[DEBUG]  CPU: vendor Intel device 306a9
[DEBUG]  CPU: family 06, model 3a, stepping 09
[INFO ]  CPU: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz.
[INFO ]  CPU: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz.
[INFO ]  CPU: platform id 1
[INFO ]  CPU: platform id 1
[INFO ]  CPU: cpuid(1) 0x306a9
[INFO ]  CPU: cpuid(1) 0x306a9
[INFO ]  CPU: AES supported
[INFO ]  CPU: TXT NOT supported
[INFO ]  CPU: VT supported
[INFO ]  CPU: AES supported
[INFO ]  CPU: TXT NOT supported
[INFO ]  CPU: VT supported
[DEBUG]  VMX status: enabled
[DEBUG]  VMX status: enabled
[DEBUG]  IA32_FEATURE_CONTROL status: locked
[DEBUG]  IA32_FEATURE_CONTROL status: locked
[DEBUG]  cpu: energy policy set to 6
[DEBUG]  cpu: energy policy set to 6
[DEBUG]  model_x06ax: frequency set to 3500
[DEBUG]  model_x06ax: frequency set to 3500
[INFO ]  CPU #4 initialized
[INFO ]  CPU #5 initialized
[INFO ]  CPU: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz.
[INFO ]  CPU: platform id 1
[INFO ]  CPU: cpuid(1) 0x306a9
[INFO ]  CPU: AES supported
[INFO ]  CPU: TXT NOT supported
[INFO ]  CPU: VT supported
[DEBUG]  VMX status: enabled
[DEBUG]  IA32_FEATURE_CONTROL status: locked
[DEBUG]  cpu: energy policy set to 6
[DEBUG]  model_x06ax: frequency set to 3500
[INFO ]  CPU #2 initialized
[INFO ]  bsp_do_flight_plan done after 849 msecs.
[DEBUG]  SMI_STS: PM1 
[DEBUG]  GPE0_STS: GPIO14 GPIO11 GPIO10 GPIO9 GPIO7 GPIO6 
[DEBUG]  ALT_GP_SMI_STS: GPI14 GPI13 GPI11 GPI10 GPI9 GPI7 GPI6 GPI5 GPI4 GPI3 GPI2 GPI1 
[DEBUG]  TCO_STS: 
[DEBUG]  Locking SMM.
[DEBUG]  CPU_CLUSTER: 0 init finished in 1128 msecs
[DEBUG]  PCI: 00:00.0 init
[DEBUG]  Disabling PEG12.
[DEBUG]  Disabling PEG11.
[DEBUG]  Disabling Device 4.
[DEBUG]  Disabling PEG60.
[DEBUG]  Disabling Device 7.
[DEBUG]  Set BIOS_RESET_CPL
[DEBUG]  CPU TDP: 77 Watts
[DEBUG]  PCI: 00:00.0 init finished in 18 msecs
[DEBUG]  PCI: 00:01.0 init
[DEBUG]  PCI: 00:01.0 init finished in 0 msecs
[DEBUG]  PCI: 00:02.0 init
[INFO ]  CBFS: Found 'vbt.bin' @0x42d80 size 0x4dd in mcache @0x7ffdd1b0
[INFO ]  Found a VBT of 3902 bytes after decompression
[INFO ]  GMA: Found VBT in CBFS
[INFO ]  GMA: Found valid VBT in CBFS
[DEBUG]  GT Power Management Init
[DEBUG]  IVB GT2 35W Power Meter Weights
[DEBUG]  GT Power Management Init (post VBIOS)
[DEBUG]  PCI: 00:02.0 init finished in 41 msecs
[DEBUG]  PCI: 00:14.0 init
[DEBUG]  XHCI: Setting up controller.. done.
[DEBUG]  PCI: 00:14.0 init finished in 3 msecs
[DEBUG]  PCI: 00:16.0 init
[DEBUG]  ME: FW Partition Table      : OK
[DEBUG]  ME: Bringup Loader Failure  : NO
[DEBUG]  ME: Firmware Init Complete  : YES
[DEBUG]  ME: Manufacturing Mode      : YES
[DEBUG]  ME: Boot Options Present    : NO
[DEBUG]  ME: Update In Progress      : NO
[DEBUG]  ME: Current Working State   : Normal
[DEBUG]  ME: Current Operation State : M0 with UMA
[DEBUG]  ME: Current Operation Mode  : Normal
[DEBUG]  ME: Error Code              : No Error
[DEBUG]  ME: Progress Phase          : Host Communication
[DEBUG]  ME: Power Management Event  : Power cycle reset through Moff
[DEBUG]  ME: Progress Phase State    : Host communication established
[NOTE ]  ME: BIOS path: Normal
[DEBUG]  No CMOS option 'me_state'.
[DEBUG]  No CMOS option 'me_state_prev'.
[DEBUG]  ME: me_state=0, me_state_prev=0
[DEBUG]  ME: Extend SHA-256: 88cdce2cfa55c4884272f0b35648cbb01caa6e7b03bbd7f814da3bd6cc758d71
[INFO ]  ME: MBP item header 00020103
[INFO ]  ME: MBP item header 00050102
[INFO ]  ME: MBP item header 00020501
[INFO ]  ME: MBP item header 00020201
[INFO ]  ME: MBP item header 02030101
[INFO ]  ME: MBP item header 02060301
[INFO ]  ME: MBP item header 02090401
[DEBUG]  ME: found version 8.0.4.1441
[DEBUG]  ME Capability: Full Network manageability                : disabled
[DEBUG]  ME Capability: Regular Network manageability             : disabled
[DEBUG]  ME Capability: Manageability                             : disabled
[DEBUG]  ME Capability: Small business technology                 : disabled
[DEBUG]  ME Capability: Level III manageability                   : disabled
[DEBUG]  ME Capability: IntelR Anti-Theft (AT)                    : disabled
[DEBUG]  ME Capability: IntelR Capability Licensing Service (CLS) :  enabled
[DEBUG]  ME Capability: IntelR Power Sharing Technology (MPC)     :  enabled
[DEBUG]  ME Capability: ICC Over Clocking                         :  enabled
[DEBUG]  ME Capability: Protected Audio Video Path (PAVP)         :  enabled
[DEBUG]  ME Capability: IPV6                                      : disabled
[DEBUG]  ME Capability: KVM Remote Control (KVM)                  : disabled
[DEBUG]  ME Capability: Outbreak Containment Heuristic (OCH)      : disabled
[DEBUG]  ME Capability: Virtual LAN (VLAN)                        :  enabled
[DEBUG]  ME Capability: TLS                                       : disabled
[DEBUG]  ME Capability: Wireless LAN (WLAN)                       : disabled
[DEBUG]  PCI: 00:16.0 init finished in 213 msecs
[DEBUG]  PCI: 00:1a.0 init
[DEBUG]  EHCI: Setting up controller.. done.
[DEBUG]  PCI: 00:1a.0 init finished in 3 msecs
[DEBUG]  PCI: 00:1b.0 init
[DEBUG]  Azalia: base = 0xfdaec000
[DEBUG]  Azalia: codec_mask = 09
[DEBUG]  azalia_audio: Initializing codec #3
[DEBUG]  azalia_audio: codec viddid: 80862806
[DEBUG]  azalia_audio: verb_size: 16
[DEBUG]  azalia_audio: verb loaded.
[DEBUG]  azalia_audio: Initializing codec #0
[DEBUG]  azalia_audio: codec viddid: 10ec0887
[DEBUG]  azalia_audio: verb_size: 60
[DEBUG]  azalia_audio: verb loaded.
[DEBUG]  PCI: 00:1b.0 init finished in 39 msecs
[DEBUG]  PCI: 00:1c.0 init
[DEBUG]  Initializing PCH PCIe bridge.
[DEBUG]  PCI: 00:1c.0 init finished in 3 msecs
[DEBUG]  PCI: 00:1c.4 init
[DEBUG]  Initializing PCH PCIe bridge.
[DEBUG]  PCI: 00:1c.4 init finished in 3 msecs
[DEBUG]  PCI: 00:1c.5 init
[DEBUG]  Initializing PCH PCIe bridge.
[DEBUG]  PCI: 00:1c.5 init finished in 3 msecs
[DEBUG]  PCI: 00:1c.6 init
[DEBUG]  Initializing PCH PCIe bridge.
[DEBUG]  PCI: 00:1c.6 init finished in 3 msecs
[DEBUG]  PCI: 00:1d.0 init
[DEBUG]  EHCI: Setting up controller.. done.
[DEBUG]  PCI: 00:1d.0 init finished in 3 msecs
[DEBUG]  PCI: 00:1f.0 init
[DEBUG]  pch: lpc_init
[INFO ]  PCH: detected Z77, device id: 0x1e44, rev id 0x4
[DEBUG]  IOAPIC: Initializing IOAPIC at 0xfec00000
[DEBUG]  IOAPIC: ID = 0x00
[DEBUG]  IOAPIC: 24 interrupts
[DEBUG]  IOAPIC: Clearing IOAPIC at 0xfec00000
[DEBUG]  IOAPIC: Bootstrap Processor Local APIC = 0x00
[INFO ]  Set power off after power failure.
[INFO ]  NMI sources disabled.
[DEBUG]  PantherPoint PM init
[DEBUG]  RTC: failed = 0x0
[DEBUG]  RTC Init
[DEBUG]  apm_control: Disabling ACPI.
[DEBUG]  APMC done.
[DEBUG]  pch_spi_init
[DEBUG]  PCI: 00:1f.0 init finished in 46 msecs
[DEBUG]  PCI: 00:1f.2 init
[DEBUG]  SATA: Initializing...
[DEBUG]  SATA: Controller in AHCI mode.
[DEBUG]  ABAR: 0xfdaeb000
[DEBUG]  PCI: 00:1f.2 init finished in 8 msecs
[DEBUG]  PCI: 00:1f.3 init
[DEBUG]  PCI: 00:1f.3 init finished in 0 msecs
[DEBUG]  PCI: 04:00.0 init
[DEBUG]  PCI: 04:00.0 init finished in 0 msecs
[DEBUG]  PNP: 002e.2 init
[DEBUG]  PNP: 002e.2 init finished in 0 msecs
[DEBUG]  PNP: 002e.5 init
[DEBUG]  PNP: 002e.5 init finished in 0 msecs
[DEBUG]  PNP: 002e.8 init
[DEBUG]  PNP: 002e.8 init finished in 0 msecs
[DEBUG]  PNP: 002e.a init
[DEBUG]  PNP: 002e.a init finished in 0 msecs
[DEBUG]  PNP: 002e.b init
[DEBUG]  PNP: 002e.b init finished in 0 msecs
[DEBUG]  PNP: 002e.f init
[DEBUG]  PNP: 002e.f init finished in 0 msecs
[DEBUG]  PNP: 002e.108 init
[DEBUG]  PNP: 002e.108 init finished in 0 msecs
[DEBUG]  PNP: 002e.109 init
[DEBUG]  PNP: 002e.109 init finished in 0 msecs
[DEBUG]  PNP: 002e.209 init
[DEBUG]  PNP: 002e.209 init finished in 0 msecs
[DEBUG]  PNP: 002e.509 init
[DEBUG]  PNP: 002e.509 init finished in 0 msecs
[DEBUG]  PNP: 002e.d init
[DEBUG]  PNP: 002e.d init finished in 0 msecs
[DEBUG]  PNP: 002e.14 init
[DEBUG]  PNP: 002e.14 init finished in 0 msecs
[DEBUG]  PNP: 002e.16 init
[DEBUG]  PNP: 002e.16 init finished in 0 msecs
[INFO ]  Devices initialized
[DEBUG]  BS: BS_DEV_INIT run times (exec / console): 597 / 1128 ms
[INFO ]  Finalize devices...
[DEBUG]  PCI: 00:1f.0 final
[INFO ]  Manufacturer: ef
[WARN ]  SF: no match for ID 7017 0000
[DEBUG]  flash size 0x800000 bytes
[INFO ]  SF: Detected 00 0000 with sector size 0x1000, total 0x800000
[DEBUG]  apm_control: Finalizing SMM.
[DEBUG]  APMC done.
[INFO ]  Devices finalized
[DEBUG]  BS: BS_POST_DEVICE run times (exec / console): 7 / 28 ms
[INFO ]  CBFS: Found 'fallback/dsdt.aml' @0x40ac0 size 0x226e in mcache @0x7ffdd184
[WARN ]  CBFS: 'fallback/slic' not found.
[INFO ]  ACPI: Writing ACPI tables at 7ff46000.
[DEBUG]  ACPI:    * FACS
[DEBUG]  ACPI:    * FACP
[DEBUG]  ACPI: added table 1/32, length now 44
[DEBUG]  Found 1 CPU(s) with 8 core(s) each.
[DEBUG]  PSS: 3501MHz power 77000 control 0x2700 status 0x2700
[DEBUG]  PSS: 3500MHz power 77000 control 0x2300 status 0x2300
[DEBUG]  PSS: 2800MHz power 56733 control 0x1c00 status 0x1c00
[DEBUG]  PSS: 2400MHz power 46310 control 0x1800 status 0x1800
[DEBUG]  PSS: 2000MHz power 36756 control 0x1400 status 0x1400
[DEBUG]  PSS: 1600MHz power 27975 control 0x1000 status 0x1000
[DEBUG]  PSS: 3501MHz power 77000 control 0x2700 status 0x2700
[DEBUG]  PSS: 3500MHz power 77000 control 0x2300 status 0x2300
[DEBUG]  PSS: 2800MHz power 56733 control 0x1c00 status 0x1c00
[DEBUG]  PSS: 2400MHz power 46310 control 0x1800 status 0x1800
[DEBUG]  PSS: 2000MHz power 36756 control 0x1400 status 0x1400
[DEBUG]  PSS: 1600MHz power 27975 control 0x1000 status 0x1000
[DEBUG]  PSS: 3501MHz power 77000 control 0x2700 status 0x2700
[DEBUG]  PSS: 3500MHz power 77000 control 0x2300 status 0x2300
[DEBUG]  PSS: 2800MHz power 56733 control 0x1c00 status 0x1c00
[DEBUG]  PSS: 2400MHz power 46310 control 0x1800 status 0x1800
[DEBUG]  PSS: 2000MHz power 36756 control 0x1400 status 0x1400
[DEBUG]  PSS: 1600MHz power 27975 control 0x1000 status 0x1000
[DEBUG]  PSS: 3501MHz power 77000 control 0x2700 status 0x2700
[DEBUG]  PSS: 3500MHz power 77000 control 0x2300 status 0x2300
[DEBUG]  PSS: 2800MHz power 56733 control 0x1c00 status 0x1c00
[DEBUG]  PSS: 2400MHz power 46310 control 0x1800 status 0x1800
[DEBUG]  PSS: 2000MHz power 36756 control 0x1400 status 0x1400
[DEBUG]  PSS: 1600MHz power 27975 control 0x1000 status 0x1000
[DEBUG]  PSS: 3501MHz power 77000 control 0x2700 status 0x2700
[DEBUG]  PSS: 3500MHz power 77000 control 0x2300 status 0x2300
[DEBUG]  PSS: 2800MHz power 56733 control 0x1c00 status 0x1c00
[DEBUG]  PSS: 2400MHz power 46310 control 0x1800 status 0x1800
[DEBUG]  PSS: 2000MHz power 36756 control 0x1400 status 0x1400
[DEBUG]  PSS: 1600MHz power 27975 control 0x1000 status 0x1000
[DEBUG]  PSS: 3501MHz power 77000 control 0x2700 status 0x2700
[DEBUG]  PSS: 3500MHz power 77000 control 0x2300 status 0x2300
[DEBUG]  PSS: 2800MHz power 56733 control 0x1c00 status 0x1c00
[DEBUG]  PSS: 2400MHz power 46310 control 0x1800 status 0x1800
[DEBUG]  PSS: 2000MHz power 36756 control 0x1400 status 0x1400
[DEBUG]  PSS: 1600MHz power 27975 control 0x1000 status 0x1000
[DEBUG]  PSS: 3501MHz power 77000 control 0x2700 status 0x2700
[DEBUG]  PSS: 3500MHz power 77000 control 0x2300 status 0x2300
[DEBUG]  PSS: 2800MHz power 56733 control 0x1c00 status 0x1c00
[DEBUG]  PSS: 2400MHz power 46310 control 0x1800 status 0x1800
[DEBUG]  PSS: 2000MHz power 36756 control 0x1400 status 0x1400
[DEBUG]  PSS: 1600MHz power 27975 control 0x1000 status 0x1000
[DEBUG]  PSS: 3501MHz power 77000 control 0x2700 status 0x2700
[DEBUG]  PSS: 3500MHz power 77000 control 0x2300 status 0x2300
[DEBUG]  PSS: 2800MHz power 56733 control 0x1c00 status 0x1c00
[DEBUG]  PSS: 2400MHz power 46310 control 0x1800 status 0x1800
[DEBUG]  PSS: 2000MHz power 36756 control 0x1400 status 0x1400
[DEBUG]  PSS: 1600MHz power 27975 control 0x1000 status 0x1000
[DEBUG]  PCI space above 4GB MMIO is at 0x170600000, len = 0xe8fa00000
[DEBUG]  Generating ACPI PIRQ entries
[DEBUG]  ACPI:    * SSDT
[DEBUG]  ACPI: added table 2/32, length now 52
[DEBUG]  ACPI:    * MCFG
[DEBUG]  ACPI: added table 3/32, length now 60
[DEBUG]  IOAPIC: 24 interrupts
[DEBUG]  ACPI:    * APIC
[DEBUG]  ACPI: added table 4/32, length now 68
[DEBUG]  ACPI:    * SPCR
[DEBUG]  ACPI: added table 5/32, length now 76
[DEBUG]  current = 7ff4acb0
[DEBUG]  ACPI:    * HPET
[DEBUG]  ACPI: added table 6/32, length now 84
[INFO ]  ACPI: done.
[DEBUG]  ACPI tables: 19696 bytes.
[DEBUG]  smbios_write_tables: 7ff3e000
[DEBUG]  SMBIOS firmware version is set to coreboot_version: '4.21-265-g5aa8d1d6add1-dirty'
[INFO ]  Create SMBIOS type 16
[INFO ]  Create SMBIOS type 17
[INFO ]  Create SMBIOS type 20
[DEBUG]  SMBIOS tables: 1034 bytes.
[DEBUG]  Writing table forward entry at 0x00000500
[DEBUG]  Wrote coreboot table at: 0x00000500, 0x10 bytes, checksum dfe7
[DEBUG]  Writing coreboot table at 0x7ff6a000
[INFO ]  CBFS: Found 'cmos_layout.bin' @0x43400 size 0x638 in mcache @0x7ffdd208
[DEBUG]   0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES
[DEBUG]   1. 0000000000001000-000000000009ffff: RAM
[DEBUG]   2. 00000000000a0000-00000000000fffff: RESERVED
[DEBUG]   3. 0000000000100000-000000007ff3dfff: RAM
[DEBUG]   4. 000000007ff3e000-000000007ff85fff: CONFIGURATION TABLES
[DEBUG]   5. 000000007ff86000-000000007ffcffff: RAMSTAGE
[DEBUG]   6. 000000007ffd0000-000000007fffffff: CONFIGURATION TABLES
[DEBUG]   7. 0000000080000000-000000008e9fffff: RESERVED
[DEBUG]   8. 00000000f0000000-00000000f3ffffff: RESERVED
[DEBUG]   9. 0000000100000000-00000001705fffff: RAM
[DEBUG]  Wrote coreboot table at: 0x7ff6a000, 0x9e4 bytes, checksum 1ecc
[DEBUG]  coreboot table: 2556 bytes.
[DEBUG]  IMD ROOT    0. 0x7ffff000 0x00001000
[DEBUG]  IMD SMALL   1. 0x7fffe000 0x00001000
[DEBUG]  CONSOLE     2. 0x7ffde000 0x00020000
[DEBUG]  RO MCACHE   3. 0x7ffdd000 0x00000334
[DEBUG]  TIME STAMP  4. 0x7ffdc000 0x00000910
[DEBUG]  MEM INFO    5. 0x7ffdb000 0x00000f48
[DEBUG]  AFTER CAR   6. 0x7ffd0000 0x0000b000
[DEBUG]  RAMSTAGE    7. 0x7ff85000 0x0004b000
[DEBUG]  SMM BACKUP  8. 0x7ff75000 0x00010000
[DEBUG]  IGD OPREGION 9. 0x7ff72000 0x00002f3e
[DEBUG]  COREBOOT   10. 0x7ff6a000 0x00008000
[DEBUG]  ACPI       11. 0x7ff46000 0x00024000
[DEBUG]  SMBIOS     12. 0x7ff3e000 0x00008000
[DEBUG]  IMD small region:
[DEBUG]    IMD ROOT    0. 0x7fffec00 0x00000400
[DEBUG]    FMAP        1. 0x7fffeb20 0x000000e0
[DEBUG]    ROMSTAGE    2. 0x7fffeb00 0x00000004
[DEBUG]    ROMSTG STCK 3. 0x7fffea40 0x000000a8
[DEBUG]    ACPI GNVS   4. 0x7fffe940 0x00000100
[DEBUG]  BS: BS_WRITE_TABLES run times (exec / console): 3 / 528 ms
[INFO ]  CBFS: Found 'fallback/payload' @0x46f40 size 0x103ab3 in mcache @0x7ffdd274
[DEBUG]  Checking segment from ROM address 0xffc5716c
[DEBUG]  Checking segment from ROM address 0xffc57188
[DEBUG]  Loading segment from ROM address 0xffc5716c
[DEBUG]    code (compression=1)
[DEBUG]    New segment dstaddr 0x00800000 memsize 0x1000000 srcaddr 0xffc571a4 filesize 0x103a7b
[DEBUG]  Loading Segment: addr: 0x00800000 memsz: 0x0000000001000000 filesz: 0x0000000000103a7b
[DEBUG]  using LZMA
[DEBUG]  Loading segment from ROM address 0xffc57188
[DEBUG]    Entry Point 0x008035f8
[DEBUG]  BS: BS_PAYLOAD_LOAD run times (exec / console): 304 / 51 ms
[DEBUG]  ICH-NM10-PCH: watchdog disabled
[DEBUG]  Jumping to boot code at 0x008035f8(0x7ff6a000)


[NOTE ]  coreboot-4.21-265-g5aa8d1d6add1-dirty Wed Sep 13 22:34:05 UTC 2023 x86_32 bootblock starting (log level: 7)...
[INFO ]  CBFS: Found 'fallback/romstage' @0x80 size 0x16ab8 in mcache @0xfeff0e2c
[DEBUG]  BS: bootblock times (exec / console): total (unknown) / 18 ms


[NOTE ]  coreboot-4.21-265-g5aa8d1d6add1-dirty Wed Sep 13 22:34:05 UTC 2023 x86_32 romstage starting (log level: 7)...
[DEBUG]  SMBus controller enabled
[DEBUG]  Setting up static northbridge registers... done
[DEBUG]  Initializing Graphics...
[DEBUG]  Back from systemagent_early_init()
[INFO ]  Intel ME early init
[INFO ]  Intel ME firmware is ready
[DEBUG]  ME: Requested 16MB UMA
[DEBUG]  Starting native Platform init
[DEBUG]  DMI: Running at X4 @ 5000MT/s
[DEBUG]  FMAP: area RW_MRC_CACHE found @ 400000 (65536 bytes)
[DEBUG]  Trying stored timings.
[DEBUG]  Starting Ivy Bridge RAM training (fast boot).
[DEBUG]  100MHz reference clock support: yes
[DEBUG]  PLL_REF100_CFG value: 0x2
[DEBUG]  Trying CAS 11, tCK 320.
[DEBUG]  Trying CAS 10, tCK 365.
[DEBUG]  Trying CAS 9, tCK 384.
[DEBUG]  Found compatible clock, CAS pair.
[DEBUG]  Selected DRAM frequency: 666 MHz
[DEBUG]  Selected CAS latency   : 9T
[DEBUG]  MPLL busy... done in 10 us
[DEBUG]  MPLL frequency is set at : 666 MHz
[DEBUG]  Done dimm mapping
[DEBUG]  Update PCI-E configuration space:
[DEBUG]  PCI(0, 0, 0)[a0] = 0
[DEBUG]  PCI(0, 0, 0)[a4] = 1
[DEBUG]  PCI(0, 0, 0)[bc] = 8ea00000
[DEBUG]  PCI(0, 0, 0)[a8] = 70600000
[DEBUG]  PCI(0, 0, 0)[ac] = 1
[DEBUG]  PCI(0, 0, 0)[b8] = 80000000
[DEBUG]  PCI(0, 0, 0)[b0] = 80a00000
[DEBUG]  PCI(0, 0, 0)[b4] = 80800000
[DEBUG]  PCI(0, 0, 0)[7c] = 7f
[DEBUG]  PCI(0, 0, 0)[70] = ff000000
[DEBUG]  PCI(0, 0, 0)[74] = 0
[DEBUG]  PCI(0, 0, 0)[78] = ff000c00
[DEBUG]  Done memory map
[DEBUG]  Done io registers
[DEBUG]  t123: 1912, 6000, 7620
[NOTE ]  ME: FWS2: 0x161f0126
[NOTE ]  ME:  Bist in progress: 0x0
[NOTE ]  ME:  ICC Status      : 0x3
[NOTE ]  ME:  Invoke MEBx     : 0x0
[NOTE ]  ME:  CPU replaced    : 0x0
[NOTE ]  ME:  MBP ready       : 0x1
[NOTE ]  ME:  MFS failure     : 0x0
[NOTE ]  ME:  Warm reset req  : 0x0
[NOTE ]  ME:  CPU repl valid  : 0x1
[NOTE ]  ME:  (Reserved)      : 0x0
[NOTE ]  ME:  FW update req   : 0x0
[NOTE ]  ME:  (Reserved)      : 0x0
[NOTE ]  ME:  Current state   : 0x1f
[NOTE ]  ME:  Current PM event: 0x6
[NOTE ]  ME:  Progress code   : 0x1
[NOTE ]  PASSED! Tell ME that DRAM is ready
[NOTE ]  ME: FWS2: 0x162c0126
[NOTE ]  ME:  Bist in progress: 0x0
[NOTE ]  ME:  ICC Status      : 0x3
[NOTE ]  ME:  Invoke MEBx     : 0x0
[NOTE ]  ME:  CPU replaced    : 0x0
[NOTE ]  ME:  MBP ready       : 0x1
[NOTE ]  ME:  MFS failure     : 0x0
[NOTE ]  ME:  Warm reset req  : 0x0
[NOTE ]  ME:  CPU repl valid  : 0x1
[NOTE ]  ME:  (Reserved)      : 0x0
[NOTE ]  ME:  FW update req   : 0x0
[NOTE ]  ME:  (Reserved)      : 0x0
[NOTE ]  ME:  Current state   : 0x2c
[NOTE ]  ME:  Current PM event: 0x6
[NOTE ]  ME:  Progress code   : 0x1
[NOTE ]  ME: Requested BIOS Action: Continue to boot
[DEBUG]  ME: FW Partition Table      : OK
[DEBUG]  ME: Bringup Loader Failure  : NO
[DEBUG]  ME: Firmware Init Complete  : NO
[DEBUG]  ME: Manufacturing Mode      : NO
[DEBUG]  ME: Boot Options Present    : NO
[DEBUG]  ME: Update In Progress      : NO
[DEBUG]  ME: Current Working State   : Normal
[DEBUG]  ME: Current Operation State : M0 with UMA
[DEBUG]  ME: Current Operation Mode  : Normal
[DEBUG]  ME: Error Code              : No Error
[DEBUG]  ME: Progress Phase          : BUP Phase
[DEBUG]  ME: Power Management Event  : Pseudo-global reset
[DEBUG]  ME: Progress Phase State    : M0 kernel load
[DEBUG]  memcfg DDR3 ref clock 133 MHz
[DEBUG]  memcfg DDR3 clock 1330 MHz
[DEBUG]  memcfg channel assignment: A: 0, B  1, C  2
[DEBUG]  memcfg channel[0] config (00630008):
[DEBUG]     ECC inactive
[DEBUG]     enhanced interleave mode on
[DEBUG]     rank interleave on
[DEBUG]     DIMMA 2048 MB width x8 dual rank
[DEBUG]     DIMMB 0 MB width x8 single rank, selected
[DEBUG]  memcfg channel[1] config (00630008):
[DEBUG]     ECC inactive
[DEBUG]     enhanced interleave mode on
[DEBUG]     rank interleave on
[DEBUG]     DIMMA 2048 MB width x8 dual rank
[DEBUG]     DIMMB 0 MB width x8 single rank, selected
[DEBUG]  CBMEM:
[DEBUG]  IMD: root @ 0x7ffff000 254 entries.
[DEBUG]  IMD: root @ 0x7fffec00 62 entries.
[DEBUG]  CBMEM entry for DIMM info: 0x7ffdb000
[DEBUG]  SMM Memory Map
[DEBUG]  SMRAM       : 0x80000000 0x800000
[DEBUG]   Subregion 0: 0x80000000 0x300000
[DEBUG]   Subregion 1: 0x80300000 0x100000
[DEBUG]   Subregion 2: 0x80400000 0x400000
[INFO ]  CBFS: Found 'fallback/postcar' @0x43a80 size 0x3444 in mcache @0xfeff1030
[DEBUG]  Loading module at 0x7ffd1000 with entry 0x7ffd1031. filesize: 0x3320 memsize: 0x91f0
[DEBUG]  Processing 57 relocs. Offset value of 0x7dfd1000
[DEBUG]  BS: romstage times (exec / console): total (unknown) / 400 ms


[NOTE ]  coreboot-4.21-265-g5aa8d1d6add1-dirty Wed Sep 13 22:34:05 UTC 2023 x86_32 ramstage starting (log level: 7)...
[DEBUG]  Normal boot
[INFO ]  Enumerating buses...
[DEBUG]  Root Device scanning...
[DEBUG]  CPU_CLUSTER: 0 enabled
[DEBUG]  DOMAIN: 0000 enabled
[DEBUG]  DOMAIN: 0000 scanning...
[DEBUG]  PCI: pci_scan_bus for bus 00
[DEBUG]  PCI: 00:00.0 [8086/0150] enabled
[DEBUG]  PCI: 00:01.0 [8086/0151] enabled
[DEBUG]  PCI: 00:02.0 [8086/0162] enabled
[DEBUG]  PCI: 00:14.0 [8086/1e31] enabled
[DEBUG]  PCI: 00:16.0 [8086/1e3a] enabled
[DEBUG]  PCI: 00:16.1: Disabling device
[DEBUG]  PCI: 00:16.1 [8086/1e3b] disabled No operations
[DEBUG]  PCI: 00:16.2: Disabling device
[DEBUG]  PCI: 00:16.3: Disabling device
[DEBUG]  PCI: 00:19.0: Disabling device
[DEBUG]  PCI: 00:1a.0 [8086/1e2d] enabled
[DEBUG]  PCI: 00:1b.0 [8086/1e20] enabled
[DEBUG]  PCI: 00:1c.0 [8086/1e10] enabled
[DEBUG]  PCI: 00:1c.1: Disabling device
[DEBUG]  PCI: 00:1c.2: Disabling device
[DEBUG]  PCI: 00:1c.3: Disabling device
[DEBUG]  PCI: 00:1c.4 [8086/1e18] enabled
[DEBUG]  PCI: 00:1c.5 [8086/1e1a] enabled
[DEBUG]  PCI: 00:1c.6 [8086/1e1c] enabled
[DEBUG]  PCI: 00:1c.7: Disabling device
[DEBUG]  PCI: 00:1d.0 [8086/1e26] enabled
[DEBUG]  PCI: 00:1e.0: Disabling device
[DEBUG]  PCI: 00:1e.0 [8086/244e] disabled
[DEBUG]  PCI: 00:1f.0 [8086/1e44] enabled
[DEBUG]  PCI: 00:1f.2 [8086/1e00] enabled
[DEBUG]  PCI: 00:1f.3 [8086/1e22] enabled
[DEBUG]  PCI: 00:1f.5: Disabling device
[DEBUG]  PCI: 00:1f.5 [8086/1e08] disabled No operations
[DEBUG]  PCI: 00:1f.6: Disabling device
[DEBUG]  PCI: 00:1f.6 [8086/1e24] disabled No operations
[WARN ]  PCI: Leftover static devices:
[WARN ]  PCI: 00:01.1
[WARN ]  PCI: 00:01.2
[WARN ]  PCI: 00:04.0
[WARN ]  PCI: 00:06.0
[WARN ]  PCI: 00:16.2
[WARN ]  PCI: 00:16.3
[WARN ]  PCI: 00:19.0
[WARN ]  PCI: 00:1c.1
[WARN ]  PCI: 00:1c.2
[WARN ]  PCI: 00:1c.3
[WARN ]  PCI: 00:1c.7
[WARN ]  PCI: Check your devicetree.cb.
[DEBUG]  PCI: 00:01.0 scanning...
[DEBUG]  PCI: pci_scan_bus for bus 01
[DEBUG]  scan_bus: bus PCI: 00:01.0 finished in 3 msecs
[DEBUG]  PCI: 00:1c.0 scanning...
[DEBUG]  PCI: pci_scan_bus for bus 02
[DEBUG]  scan_bus: bus PCI: 00:1c.0 finished in 3 msecs
[DEBUG]  PCI: 00:1c.4 scanning...
[DEBUG]  PCI: pci_scan_bus for bus 03
[DEBUG]  scan_bus: bus PCI: 00:1c.4 finished in 3 msecs
[DEBUG]  PCI: 00:1c.5 scanning...
[DEBUG]  PCI: pci_scan_bus for bus 04
[DEBUG]  PCI: 04:00.0 [10ec/8168] enabled
[INFO ]  Enabling Common Clock Configuration
[INFO ]  ASPM: Enabled L1
[INFO ]  PCIe: Max_Payload_Size adjusted to 128
[DEBUG]  PCI: 04:00.0: No LTR support
[DEBUG]  scan_bus: bus PCI: 00:1c.5 finished in 21 msecs
[DEBUG]  PCI: 00:1c.6 scanning...
[DEBUG]  PCI: pci_scan_bus for bus 05
[DEBUG]  PCI: 05:00.0 subordinate PCI
[DEBUG]  PCI: 05:00.0 [1b21/1080] enabled
[DEBUG]  PCI: 05:00.0 scanning...
[DEBUG]  PCI: pci_scan_bus for bus 06
[DEBUG]  scan_bus: bus PCI: 05:00.0 finished in 3 msecs
[INFO ]  ASPM: Enabled None
[INFO ]  PCIe: Max_Payload_Size adjusted to 128
[DEBUG]  PCI: 05:00.0: No LTR support
[DEBUG]  scan_bus: bus PCI: 00:1c.6 finished in 31 msecs
[DEBUG]  PCI: 00:1f.0 scanning...
[DEBUG]  PNP: 002e.1 disabled
[DEBUG]  PNP: 002e.2 enabled
[DEBUG]  PNP: 002e.3 disabled
[DEBUG]  PNP: 002e.5 enabled
[DEBUG]  PNP: 002e.6 disabled
[DEBUG]  PNP: 002e.8 enabled
[DEBUG]  PNP: 002e.a enabled
[DEBUG]  PNP: 002e.b enabled
[DEBUG]  PNP: 002e.e disabled
[DEBUG]  PNP: 002e.f enabled
[DEBUG]  PNP: 002e.9 disabled
[DEBUG]  PNP: 002e.308 enabled
[DEBUG]  PNP: 002e.108 enabled
[DEBUG]  PNP: 002e.109 enabled
[DEBUG]  PNP: 002e.209 enabled
[DEBUG]  PNP: 002e.309 disabled
[DEBUG]  PNP: 002e.409 disabled
[DEBUG]  PNP: 002e.509 enabled
[DEBUG]  PNP: 002e.609 disabled
[DEBUG]  PNP: 002e.709 disabled
[DEBUG]  PNP: 004e.0 enabled
[DEBUG]  PNP: 002e.d enabled
[DEBUG]  PNP: 002e.14 enabled
[DEBUG]  PNP: 002e.16 enabled
[DEBUG]  scan_bus: bus PCI: 00:1f.0 finished in 64 msecs
[DEBUG]  PCI: 00:1f.3 scanning...
[DEBUG]  scan_bus: bus PCI: 00:1f.3 finished in 0 msecs
[DEBUG]  scan_bus: bus DOMAIN: 0000 finished in 329 msecs
[DEBUG]  scan_bus: bus Root Device finished in 343 msecs
[INFO ]  done
[DEBUG]  BS: BS_DEV_ENUMERATE run times (exec / console): 1 / 354 ms
[DEBUG]  found VGA at PCI: 00:02.0
[DEBUG]  Setting up VGA for PCI: 00:02.0
[DEBUG]  Setting PCI_BRIDGE_CTL_VGA for bridge DOMAIN: 0000
[DEBUG]  Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
[INFO ]  Allocating resources...
[INFO ]  Reading resources...
[DEBUG]  Adding PCIe enhanced config space BAR 0xf0000000-0xf4000000.
[DEBUG]  TOUUD 0x170600000 TOLUD 0x8ea00000 TOM 0x100000000
[DEBUG]  MEBASE 0xff000000
[DEBUG]  IGD decoded, subtracting 224M UMA and 2M GTT
[DEBUG]  TSEG base 0x80000000 size 8M
[INFO ]  Available memory below 4GB: 2048M
[INFO ]  Available memory above 4GB: 1798M
[ERROR]  PNP: 002e.308 missing read_resources
[ERROR]  PNP: 004e.0 missing read_resources
[INFO ]  Done reading resources.
[INFO ]  === Resource allocator: DOMAIN: 0000 - Pass 1 (relative placement) ===
[DEBUG]   PCI: 00:1c.5 io: size: 0 align: 12 gran: 12 limit: ffff
[DEBUG]    PCI: 04:00.0 10 *  [0x0 - 0xff] io
[DEBUG]   PCI: 00:1c.5 io: size: 1000 align: 12 gran: 12 limit: ffff done
[DEBUG]   PCI: 00:1c.5 mem: size: 0 align: 20 gran: 20 limit: ffffffff
[DEBUG]   PCI: 00:1c.5 mem: size: 0 align: 20 gran: 20 limit: ffffffff done
[DEBUG]   PCI: 00:1c.5 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff
[DEBUG]    PCI: 04:00.0 20 *  [0x0 - 0x3fff] prefmem
[DEBUG]    PCI: 04:00.0 18 *  [0x4000 - 0x4fff] prefmem
[DEBUG]   PCI: 00:1c.5 prefmem: size: 100000 align: 20 gran: 20 limit: ffffffff done
[DEBUG]   PCI: 00:1c.6 io: size: 0 align: 12 gran: 12 limit: ffff
[DEBUG]   PCI: 00:1c.6 io: size: 0 align: 12 gran: 12 limit: ffff done
[DEBUG]   PCI: 00:1c.6 mem: size: 0 align: 20 gran: 20 limit: ffffffff
[DEBUG]   PCI: 00:1c.6 mem: size: 0 align: 20 gran: 20 limit: ffffffff done
[DEBUG]   PCI: 00:1c.6 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff
[DEBUG]   PCI: 00:1c.6 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff done
[INFO ]  === Resource allocator: DOMAIN: 0000 - Pass 2 (allocating resources) ===
[DEBUG]  DOMAIN: 0000 io: base: 0 size: 0 align: 0 gran: 0 limit: ffff
[DEBUG]   avoid_fixed_resources: PCI: 00:1f.0 10000000 base 00000000 limit 00000fff io (fixed)
[DEBUG]   avoid_fixed_resources: PNP: 002e.2 60 base 000003f8 limit 000003ff io (fixed)
[DEBUG]   avoid_fixed_resources: PNP: 002e.5 60 base 00000060 limit 00000060 io (fixed)
[DEBUG]   avoid_fixed_resources: PNP: 002e.5 62 base 00000064 limit 00000064 io (fixed)
[DEBUG]   avoid_fixed_resources: PNP: 002e.b 60 base 00000290 limit 00000291 io (fixed)
[DEBUG]   avoid_fixed_resources: PNP: 002e.b 62 base 00000000 limit 00000001 io (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:1f.3 20 base 00000400 limit 0000041f io (fixed)
[INFO ]   DOMAIN: 0000: Resource ranges:
[INFO ]   * Base: 1000, Size: f000, Tag: 100
[DEBUG]    PCI: 00:1c.5 1c *  [0xf000 - 0xffff] limit: ffff io
[DEBUG]    PCI: 00:02.0 20 *  [0xefc0 - 0xefff] limit: efff io
[DEBUG]    PCI: 00:1f.2 20 *  [0xefa0 - 0xefbf] limit: efbf io
[ERROR]  Resource didn't fit!!!
[DEBUG]    PNP: 002e.8 60 *  size: 0x8 limit: fff io
[DEBUG]    PCI: 00:1f.2 10 *  [0xef98 - 0xef9f] limit: ef9f io
[DEBUG]    PCI: 00:1f.2 18 *  [0xef90 - 0xef97] limit: ef97 io
[DEBUG]    PCI: 00:1f.2 14 *  [0xef8c - 0xef8f] limit: ef8f io
[DEBUG]    PCI: 00:1f.2 1c *  [0xef88 - 0xef8b] limit: ef8b io
[DEBUG]  DOMAIN: 0000 io: base: 0 size: 0 align: 0 gran: 0 limit: ffff done
[DEBUG]  DOMAIN: 0000 mem: base: 80000000 size: 0 align: 0 gran: 0 limit: fdffffff
[DEBUG]  DOMAIN: 0000 mem: base: 100000000 size: 0 align: 0 gran: 0 limit: fffffffff
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 60 base f0000000 limit f3ffffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 03 base 00000000 limit 0009ffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 04 base 00100000 limit 7fffffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 05 base 100000000 limit 1705fffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 06 base 80000000 limit 8e9fffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 07 base 000a0000 limit 000bffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 08 base 000c0000 limit 000fffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:1f.0 10000100 base ff000000 limit ffffffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:1f.0 03 base fec00000 limit fec00fff mem (fixed)
[INFO ]   DOMAIN: 0000: Resource ranges:
[INFO ]   * Base: 8ea00000, Size: 61600000, Tag: 200
[INFO ]   * Base: f4000000, Size: a000000, Tag: 200
[INFO ]   * Base: 170600000, Size: e8fa00000, Tag: 200
[DEBUG]    PCI: 00:02.0 18 *  [0xe0000000 - 0xefffffff] limit: efffffff prefmem
[DEBUG]    PCI: 00:02.0 10 *  [0xfdc00000 - 0xfdffffff] limit: fdffffff mem
[DEBUG]    PCI: 00:1c.5 24 *  [0xfdb00000 - 0xfdbfffff] limit: fdbfffff prefmem
[DEBUG]    PCI: 00:14.0 10 *  [0xfdaf0000 - 0xfdafffff] limit: fdafffff mem
[DEBUG]    PCI: 00:1b.0 10 *  [0xfdaec000 - 0xfdaeffff] limit: fdaeffff mem
[DEBUG]    PCI: 00:1f.2 24 *  [0xfdaeb000 - 0xfdaeb7ff] limit: fdaeb7ff mem
[DEBUG]    PCI: 00:1a.0 10 *  [0xfdaea000 - 0xfdaea3ff] limit: fdaea3ff mem
[DEBUG]    PCI: 00:1d.0 10 *  [0xfdae9000 - 0xfdae93ff] limit: fdae93ff mem
[DEBUG]    PCI: 00:1f.3 10 *  [0xfdae8000 - 0xfdae80ff] limit: fdae80ff mem
[DEBUG]    PCI: 00:16.0 10 *  [0xfdae7000 - 0xfdae700f] limit: fdae700f mem
[DEBUG]  DOMAIN: 0000 mem: base: 80000000 size: 0 align: 0 gran: 0 limit: fdffffff done
[DEBUG]  DOMAIN: 0000 mem: base: 100000000 size: 0 align: 0 gran: 0 limit: fffffffff done
[DEBUG]    PCI: 04:00.0 10 *  [0xf000 - 0xf0ff] limit: f0ff io
[DEBUG]    PCI: 04:00.0 18 *  [0xfdb04000 - 0xfdb04fff] limit: fdb04fff prefmem
[DEBUG]    PCI: 04:00.0 20 *  [0xfdb00000 - 0xfdb03fff] limit: fdb03fff prefmem
[INFO ]  === Resource allocator: DOMAIN: 0000 - resource allocation complete ===
[DEBUG]  PCI: 00:01.0 1c <- [0x000000000000ffff - 0x000000000000fffe] size 0x00000000 gran 0x0c bus 01 io
[DEBUG]  PCI: 00:01.0 24 <- [0xffffffffffffffff - 0xfffffffffffffffe] size 0x00000000 gran 0x14 bus 01 prefmem
[DEBUG]  PCI: 00:01.0 20 <- [0x00000000ffffffff - 0x00000000fffffffe] size 0x00000000 gran 0x14 bus 01 mem
[DEBUG]  PCI: 00:02.0 10 <- [0x00000000fdc00000 - 0x00000000fdffffff] size 0x00400000 gran 0x16 mem64
[DEBUG]  PCI: 00:02.0 18 <- [0x00000000e0000000 - 0x00000000efffffff] size 0x10000000 gran 0x1c prefmem64
[DEBUG]  PCI: 00:02.0 20 <- [0x000000000000efc0 - 0x000000000000efff] size 0x00000040 gran 0x06 io
[DEBUG]  PCI: 00:14.0 10 <- [0x00000000fdaf0000 - 0x00000000fdafffff] size 0x00010000 gran 0x10 mem64
[DEBUG]  PCI: 00:16.0 10 <- [0x00000000fdae7000 - 0x00000000fdae700f] size 0x00000010 gran 0x04 mem64
[DEBUG]  PCI: 00:1a.0 10 <- [0x00000000fdaea000 - 0x00000000fdaea3ff] size 0x00000400 gran 0x0a mem
[DEBUG]  PCI: 00:1b.0 10 <- [0x00000000fdaec000 - 0x00000000fdaeffff] size 0x00004000 gran 0x0e mem64
[DEBUG]  PCI: 00:1c.0 1c <- [0x000000000000ffff - 0x000000000000fffe] size 0x00000000 gran 0x0c bus 02 io
[DEBUG]  PCI: 00:1c.0 24 <- [0xffffffffffffffff - 0xfffffffffffffffe] size 0x00000000 gran 0x14 bus 02 prefmem
[DEBUG]  PCI: 00:1c.0 20 <- [0x00000000ffffffff - 0x00000000fffffffe] size 0x00000000 gran 0x14 bus 02 mem
[DEBUG]  PCI: 00:1c.4 1c <- [0x000000000000ffff - 0x000000000000fffe] size 0x00000000 gran 0x0c bus 03 io
[DEBUG]  PCI: 00:1c.4 24 <- [0xffffffffffffffff - 0xfffffffffffffffe] size 0x00000000 gran 0x14 bus 03 prefmem
[DEBUG]  PCI: 00:1c.4 20 <- [0x00000000ffffffff - 0x00000000fffffffe] size 0x00000000 gran 0x14 bus 03 mem
[DEBUG]  PCI: 00:1c.5 1c <- [0x000000000000f000 - 0x000000000000ffff] size 0x00001000 gran 0x0c bus 04 io
[DEBUG]  PCI: 00:1c.5 24 <- [0x00000000fdb00000 - 0x00000000fdbfffff] size 0x00100000 gran 0x14 bus 04 prefmem
[DEBUG]  PCI: 00:1c.5 20 <- [0x00000000ffffffff - 0x00000000fffffffe] size 0x00000000 gran 0x14 bus 04 mem
[DEBUG]  PCI: 04:00.0 10 <- [0x000000000000f000 - 0x000000000000f0ff] size 0x00000100 gran 0x08 io
[DEBUG]  PCI: 04:00.0 18 <- [0x00000000fdb04000 - 0x00000000fdb04fff] size 0x00001000 gran 0x0c prefmem64
[DEBUG]  PCI: 04:00.0 20 <- [0x00000000fdb00000 - 0x00000000fdb03fff] size 0x00004000 gran 0x0e prefmem64
[DEBUG]  PCI: 00:1c.6 1c <- [0x000000000000ffff - 0x000000000000fffe] size 0x00000000 gran 0x0c bus 05 io
[DEBUG]  PCI: 00:1c.6 24 <- [0xffffffffffffffff - 0xfffffffffffffffe] size 0x00000000 gran 0x14 bus 05 prefmem
[DEBUG]  PCI: 00:1c.6 20 <- [0x00000000ffffffff - 0x00000000fffffffe] size 0x00000000 gran 0x14 bus 05 mem
[DEBUG]  PCI: 05:00.0 1c <- [0x00000000ffffffff - 0x00000000fffffffe] size 0x00000000 gran 0x0c bus 06 io
[DEBUG]  PCI: 05:00.0 24 <- [0xffffffffffffffff - 0xfffffffffffffffe] size 0x00000000 gran 0x14 bus 06 prefmem
[DEBUG]  PCI: 05:00.0 20 <- [0x00000000ffffffff - 0x00000000fffffffe] size 0x00000000 gran 0x14 bus 06 mem
[DEBUG]  PCI: 00:1d.0 10 <- [0x00000000fdae9000 - 0x00000000fdae93ff] size 0x00000400 gran 0x0a mem
[DEBUG]  PNP: 002e.2 60 <- [0x00000000000003f8 - 0x00000000000003ff] size 0x00000008 gran 0x03 io
[DEBUG]  PNP: 002e.2 70 <- [0x0000000000000004 - 0x0000000000000004] size 0x00000001 gran 0x00 irq
[DEBUG]  PNP: 002e.2 26 <- [0x0000000000000010 - 0x000000000000000f] size 0x00000000 gran 0x00 drq
[DEBUG]  PNP: 002e.2 13 <- [0x00000000000000ff - 0x00000000000000fe] size 0x00000000 gran 0x00 drq
[DEBUG]  PNP: 002e.2 14 <- [0x00000000000000ff - 0x00000000000000fe] size 0x00000000 gran 0x00 drq
[DEBUG]  PNP: 002e.2 1a <- [0x0000000000000002 - 0x0000000000000001] size 0x00000000 gran 0x00 drq
[DEBUG]  PNP: 002e.2 1b <- [0x0000000000000060 - 0x000000000000005f] size 0x00000000 gran 0x00 drq
[DEBUG]  PNP: 002e.2 2c <- [0x0000000000000000 - 0xffffffffffffffff] size 0x00000000 gran 0x00 drq
[DEBUG]  PNP: 002e.5 60 <- [0x0000000000000060 - 0x0000000000000060] size 0x00000001 gran 0x00 io
[DEBUG]  PNP: 002e.5 62 <- [0x0000000000000064 - 0x0000000000000064] size 0x00000001 gran 0x00 io
[DEBUG]  PNP: 002e.5 70 <- [0x0000000000000001 - 0x0000000000000001] size 0x00000001 gran 0x00 irq
[DEBUG]  PNP: 002e.5 72 <- [0x000000000000000c - 0x000000000000000c] size 0x00000001 gran 0x00 irq
[DEBUG]  PNP: 002e.5 f0 <- [0x0000000000000082 - 0x0000000000000081] size 0x00000000 gran 0x00 drq
[DEBUG]  PNP: 002e.5 2a <- [0x0000000000000048 - 0x0000000000000047] size 0x00000000 gran 0x00 drq
[DEBUG]  PNP: 002e.5 22 <- [0x00000000000000d7 - 0x00000000000000d6] size 0x00000000 gran 0x00 drq
[DEBUG]  PNP: 002e.8 e0 <- [0x000000000000007f - 0x000000000000007e] size 0x00000000 gran 0x00 drq
[DEBUG]  PNP: 002e.8 e1 <- [0x0000000000000080 - 0x000000000000007f] size 0x00000000 gran 0x00 drq
[ERROR]  PNP: 002e.8 60 io size: 0x0000000008 not assigned in devicetree
[DEBUG]  PNP: 002e.a e7 <- [0x0000000000000011 - 0x0000000000000010] size 0x00000000 gran 0x00 drq
[DEBUG]  PNP: 002e.a f2 <- [0x000000000000005d - 0x000000000000005d] size 0x00000001 gran 0x00 drq
[DEBUG]  PNP: 002e.b 60 <- [0x0000000000000290 - 0x0000000000000291] size 0x00000002 gran 0x01 io
[DEBUG]  PNP: 002e.b 62 <- [0x0000000000000000 - 0x0000000000000001] size 0x00000002 gran 0x01 io
[DEBUG]  PNP: 002e.b e4 <- [0x00000000000000f9 - 0x00000000000000f8] size 0x00000000 gran 0x00 drq
[DEBUG]  PNP: 002e.b f0 <- [0x000000000000003e - 0x000000000000003e] size 0x00000001 gran 0x00 drq
[ERROR]  PNP: 002e.b 70 irq size: 0x0000000001 not assigned in devicetree
[DEBUG]  PNP: 002e.f e4 <- [0x00000000000000fc - 0x00000000000000fb] size 0x00000000 gran 0x00 drq
[DEBUG]  PNP: 002e.f e6 <- [0x000000000000007f - 0x000000000000007e] size 0x00000000 gran 0x00 drq
[DEBUG]  PNP: 002e.209 e0 <- [0x00000000000000bf - 0x00000000000000be] size 0x00000000 gran 0x00 drq
[DEBUG]  PNP: 002e.209 e1 <- [0x00000000000000c0 - 0x00000000000000bf] size 0x00000000 gran 0x00 drq
[DEBUG]  PNP: 002e.509 f4 <- [0x00000000000000fc - 0x00000000000000fc] size 0x00000001 gran 0x00 drq
[DEBUG]  PNP: 002e.509 f5 <- [0x00000000000000c4 - 0x00000000000000c4] size 0x00000001 gran 0x00 drq
[DEBUG]  PCI: 00:1f.2 10 <- [0x000000000000ef98 - 0x000000000000ef9f] size 0x00000008 gran 0x03 io
[DEBUG]  PCI: 00:1f.2 14 <- [0x000000000000ef8c - 0x000000000000ef8f] size 0x00000004 gran 0x02 io
[DEBUG]  PCI: 00:1f.2 18 <- [0x000000000000ef90 - 0x000000000000ef97] size 0x00000008 gran 0x03 io
[DEBUG]  PCI: 00:1f.2 1c <- [0x000000000000ef88 - 0x000000000000ef8b] size 0x00000004 gran 0x02 io
[DEBUG]  PCI: 00:1f.2 20 <- [0x000000000000efa0 - 0x000000000000efbf] size 0x00000020 gran 0x05 io
[DEBUG]  PCI: 00:1f.2 24 <- [0x00000000fdaeb000 - 0x00000000fdaeb7ff] size 0x00000800 gran 0x0b mem
[DEBUG]  PCI: 00:1f.3 10 <- [0x00000000fdae8000 - 0x00000000fdae80ff] size 0x00000100 gran 0x08 mem64
[INFO ]  Done setting resources.
[INFO ]  Done allocating resources.
[DEBUG]  BS: BS_DEV_RESOURCES run times (exec / console): 1 / 1104 ms
[INFO ]  Enabling resources...
[DEBUG]  PCI: 00:00.0 subsystem <- 1043/84ca
[DEBUG]  PCI: 00:00.0 cmd <- 06
[DEBUG]  PCI: 00:01.0 bridge ctrl <- 0013
[DEBUG]  PCI: 00:01.0 subsystem <- 1043/84ca
[DEBUG]  PCI: 00:01.0 cmd <- 00
[DEBUG]  PCI: 00:02.0 subsystem <- 1043/84ca
[DEBUG]  PCI: 00:02.0 cmd <- 03
[DEBUG]  PCI: 00:14.0 subsystem <- 1043/84ca
[DEBUG]  PCI: 00:14.0 cmd <- 102
[DEBUG]  PCI: 00:16.0 subsystem <- 1043/84ca
[DEBUG]  PCI: 00:16.0 cmd <- 02
[DEBUG]  PCI: 00:1a.0 subsystem <- 1043/84ca
[DEBUG]  PCI: 00:1a.0 cmd <- 102
[DEBUG]  PCI: 00:1b.0 subsystem <- 1043/84ca
[DEBUG]  PCI: 00:1b.0 cmd <- 102
[DEBUG]  PCI: 00:1c.0 bridge ctrl <- 0013
[DEBUG]  PCI: 00:1c.0 subsystem <- 1043/84ca
[DEBUG]  PCI: 00:1c.0 cmd <- 100
[DEBUG]  PCI: 00:1c.4 bridge ctrl <- 0013
[DEBUG]  PCI: 00:1c.4 subsystem <- 1043/84ca
[DEBUG]  PCI: 00:1c.4 cmd <- 100
[DEBUG]  PCI: 00:1c.5 bridge ctrl <- 0013
[DEBUG]  PCI: 00:1c.5 subsystem <- 1849/1e1a
[DEBUG]  PCI: 00:1c.5 cmd <- 107
[DEBUG]  PCI: 00:1c.6 bridge ctrl <- 0013
[DEBUG]  PCI: 00:1c.6 subsystem <- 1043/84ca
[DEBUG]  PCI: 00:1c.6 cmd <- 100
[DEBUG]  PCI: 00:1d.0 subsystem <- 1043/84ca
[DEBUG]  PCI: 00:1d.0 cmd <- 102
[DEBUG]  PCI: 00:1f.0 subsystem <- 1043/84ca
[DEBUG]  PCI: 00:1f.0 cmd <- 107
[DEBUG]  PCI: 00:1f.2 subsystem <- 1043/84ca
[DEBUG]  PCI: 00:1f.2 cmd <- 03
[DEBUG]  PCI: 00:1f.3 subsystem <- 1043/84ca
[DEBUG]  PCI: 00:1f.3 cmd <- 103
[DEBUG]  PCI: 04:00.0 subsystem <- 1043/84ca
[DEBUG]  PCI: 04:00.0 cmd <- 103
[DEBUG]  PCI: 05:00.0 bridge ctrl <- 0013
[DEBUG]  PCI: 05:00.0 cmd <- 00
[INFO ]  done.
[DEBUG]  BS: BS_DEV_ENABLE run times (exec / console): 1 / 139 ms
[INFO ]  Initializing devices...
[DEBUG]  CPU_CLUSTER: 0 init
[INFO ]  LAPIC 0x0 in XAPIC mode.
[DEBUG]  MTRR: Physical address space:
[DEBUG]  0x0000000000000000 - 0x000000000009ffff size 0x000a0000 type 6
[DEBUG]  0x00000000000a0000 - 0x00000000000bffff size 0x00020000 type 0
[DEBUG]  0x00000000000c0000 - 0x000000007fffffff size 0x7ff40000 type 6
[DEBUG]  0x0000000080000000 - 0x00000000dfffffff size 0x60000000 type 0
[DEBUG]  0x00000000e0000000 - 0x00000000efffffff size 0x10000000 type 1
[DEBUG]  0x00000000f0000000 - 0x00000000ffffffff size 0x10000000 type 0
[DEBUG]  0x0000000100000000 - 0x00000001705fffff size 0x70600000 type 6
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x250 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x258 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x259 0x0000000000000000
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x268 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x269 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26a 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26b 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26c 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26d 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26e 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26f 0x0606060606060606
[DEBUG]  apic_id 0x0 setup mtrr for CPU physical address size: 36 bits
[DEBUG]  MTRR: default type WB/UC MTRR counts: 4/3.
[DEBUG]  MTRR: UC selected as default type.
[DEBUG]  MTRR: 0 base 0x0000000000000000 mask 0x0000000f80000000 type 6
[DEBUG]  MTRR: 1 base 0x00000000e0000000 mask 0x0000000ff0000000 type 1
[DEBUG]  MTRR: 2 base 0x0000000100000000 mask 0x0000000f80000000 type 6

[DEBUG]  MTRR check
[DEBUG]  Fixed MTRRs   : Enabled
[DEBUG]  Variable MTRRs: Enabled

[DEBUG]  CPU has 4 cores, 8 threads enabled.
[DEBUG]  Setting up SMI for CPU
[INFO ]  Will perform SMM setup.
[DEBUG]  microcode: sig=0x306a9 pf=0x2 revision=0x21
[INFO ]  CBFS: Found 'cpu_microcode_blob.bin' @0x16bc0 size 0x6800 in mcache @0x7ffdd0ac
[INFO ]  CPU: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz.
[INFO ]  LAPIC 0x0 in XAPIC mode.
[DEBUG]  CPU: APIC: 00 enabled
[DEBUG]  CPU: APIC: 01 enabled
[DEBUG]  CPU: APIC: 02 enabled
[DEBUG]  CPU: APIC: 03 enabled
[DEBUG]  CPU: APIC: 04 enabled
[DEBUG]  CPU: APIC: 05 enabled
[DEBUG]  CPU: APIC: 06 enabled
[DEBUG]  CPU: APIC: 07 enabled
[DEBUG]  Loading module at 0x00030000 with entry 0x00030000. filesize: 0x178 memsize: 0x178
[DEBUG]  Processing 16 relocs. Offset value of 0x00030000
[DEBUG]  Attempting to start 7 APs
[DEBUG]  Waiting for 10ms after sending INIT.
[DEBUG]  Waiting for SIPI to complete...
[INFO ]  LAPIC 0x1 in XAPIC mode.
[DEBUG]  done.
[INFO ]  AP: slot 2 apic_id 1, MCU rev: 0x00000021
[DEBUG]  Waiting for SIPI to complete...
[DEBUG]  done.
[INFO ]  LAPIC 0x5 in XAPIC mode.
[INFO ]  LAPIC 0x4 in XAPIC mode.
[INFO ]  AP: slot 1 apic_id 5, MCU rev: 0x00000021
[INFO ]  AP: slot 3 apic_id 4, MCU rev: 0x00000021
[INFO ]  LAPIC 0x2 in XAPIC mode.
[INFO ]  LAPIC 0x3 in XAPIC mode.
[INFO ]  AP: slot 7 apic_id 2, MCU rev: 0x00000021
[INFO ]  AP: slot 6 apic_id 3, MCU rev: 0x00000021
[INFO ]  LAPIC 0x6 in XAPIC mode.
[INFO ]  LAPIC 0x7 in XAPIC mode.
[INFO ]  AP: slot 5 apic_id 6, MCU rev: 0x00000021
[INFO ]  AP: slot 4 apic_id 7, MCU rev: 0x00000021
[DEBUG]  Loading module at 0x00038000 with entry 0x00038000. filesize: 0x1a0 memsize: 0x1a0
[DEBUG]  Processing 9 relocs. Offset value of 0x00038000
[DEBUG]  smm_module_setup_stub: stack_top = 0x80002000
[DEBUG]  smm_module_setup_stub: per cpu stack_size = 0x400
[DEBUG]  smm_module_setup_stub: runtime.smm_size = 0x10000
[DEBUG]  SMM Module: stub loaded at 38000. Will call 0x7ffa41c3
[DEBUG]  Installing permanent SMM handler to 0x80000000
[DEBUG]  HANDLER      [0x802fe000-0x802ffcf0]

[DEBUG]  CPU 0
[DEBUG]    ss0        [0x802fdc00-0x802fe000]
[DEBUG]    stub0      [0x802f6000-0x802f61a0]

[DEBUG]  CPU 1
[DEBUG]    ss1        [0x802fd800-0x802fdc00]
[DEBUG]    stub1      [0x802f5c00-0x802f5da0]

[DEBUG]  CPU 2
[DEBUG]    ss2        [0x802fd400-0x802fd800]
[DEBUG]    stub2      [0x802f5800-0x802f59a0]

[DEBUG]  CPU 3
[DEBUG]    ss3        [0x802fd000-0x802fd400]
[DEBUG]    stub3      [0x802f5400-0x802f55a0]

[DEBUG]  CPU 4
[DEBUG]    ss4        [0x802fcc00-0x802fd000]
[DEBUG]    stub4      [0x802f5000-0x802f51a0]

[DEBUG]  CPU 5
[DEBUG]    ss5        [0x802fc800-0x802fcc00]
[DEBUG]    stub5      [0x802f4c00-0x802f4da0]

[DEBUG]  CPU 6
[DEBUG]    ss6        [0x802fc400-0x802fc800]
[DEBUG]    stub6      [0x802f4800-0x802f49a0]

[DEBUG]  CPU 7
[DEBUG]    ss7        [0x802fc000-0x802fc400]
[DEBUG]    stub7      [0x802f4400-0x802f45a0]

[DEBUG]  stacks       [0x80000000-0x80002000]
[DEBUG]  Loading module at 0x802fe000 with entry 0x802fe750. filesize: 0x1ca8 memsize: 0x1cf0
[DEBUG]  Processing 82 relocs. Offset value of 0x802fe000
[DEBUG]  Loading module at 0x802f6000 with entry 0x802f6000. filesize: 0x1a0 memsize: 0x1a0
[DEBUG]  Processing 9 relocs. Offset value of 0x802f6000
[DEBUG]  smm_module_setup_stub: stack_top = 0x80002000
[DEBUG]  smm_module_setup_stub: per cpu stack_size = 0x400
[DEBUG]  smm_module_setup_stub: runtime.smm_size = 0x300000
[DEBUG]  SMM Module: placing smm entry code at 802f5c00,  cpu # 0x1
[DEBUG]  SMM Module: placing smm entry code at 802f5800,  cpu # 0x2
[DEBUG]  SMM Module: placing smm entry code at 802f5400,  cpu # 0x3
[DEBUG]  SMM Module: placing smm entry code at 802f5000,  cpu # 0x4
[DEBUG]  SMM Module: placing smm entry code at 802f4c00,  cpu # 0x5
[DEBUG]  SMM Module: placing smm entry code at 802f4800,  cpu # 0x6
[DEBUG]  SMM Module: placing smm entry code at 802f4400,  cpu # 0x7
[DEBUG]  SMM Module: stub loaded at 802f6000. Will call 0x802fe750
[INFO ]  smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802ee000, cpu = 0
[DEBUG]  In relocation handler: cpu 0
[DEBUG]  New SMBASE=0x802ee000 IEDBASE=0x80400000
[DEBUG]  Writing SMRR. base = 0x80000006, mask=0xff800800
[DEBUG]  Relocation complete.
[INFO ]  microcode: Update skipped, already up-to-date
[INFO ]  smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802ed800, cpu = 2
[DEBUG]  In relocation handler: cpu 2
[DEBUG]  New SMBASE=0x802ed800 IEDBASE=0x80400000
[DEBUG]  Writing SMRR. base = 0x80000006, mask=0xff800800
[DEBUG]  Relocation complete.
[INFO ]  microcode: Update skipped, already up-to-date
[INFO ]  smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802edc00, cpu = 1
[DEBUG]  In relocation handler: cpu 1
[DEBUG]  New SMBASE=0x802edc00 IEDBASE=0x80400000
[DEBUG]  Writing SMRR. base = 0x80000006, mask=0xff800800
[DEBUG]  Relocation complete.
[INFO ]  smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802ed400, cpu = 3
[INFO ]  microcode: Update skipped, already up-to-date
[DEBUG]  In relocation handler: cpu 3
[DEBUG]  New SMBASE=0x802ed400 IEDBASE=0x80400000
[DEBUG]  Writing SMRR. base = 0x80000006, mask=0xff800800
[DEBUG]  Relocation complete.
[INFO ]  microcode: Update skipped, already up-to-date
[INFO ]  smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802ec800, cpu = 6
[DEBUG]  In relocation handler: cpu 6
[DEBUG]  New SMBASE=0x802ec800 IEDBASE=0x80400000
[DEBUG]  Writing SMRR. base = 0x80000006, mask=0xff800800
[DEBUG]  Relocation complete.
[INFO ]  smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802ec400, cpu = 7
[INFO ]  microcode: Update skipped, already up-to-date
[DEBUG]  In relocation handler: cpu 7
[DEBUG]  New SMBASE=0x802ec400 IEDBASE=0x80400000
[DEBUG]  Writing SMRR. base = 0x80000006, mask=0xff800800
[DEBUG]  Relocation complete.
[INFO ]  microcode: Update skipped, already up-to-date
[INFO ]  smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802ecc00, cpu = 5
[DEBUG]  In relocation handler: cpu 5
[DEBUG]  New SMBASE=0x802ecc00 IEDBASE=0x80400000
[DEBUG]  Writing SMRR. base = 0x80000006, mask=0xff800800
[DEBUG]  Relocation complete.
[INFO ]  smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802ed000, cpu = 4
[INFO ]  microcode: Update skipped, already up-to-date
[DEBUG]  In relocation handler: cpu 4
[DEBUG]  New SMBASE=0x802ed000 IEDBASE=0x80400000
[DEBUG]  Writing SMRR. base = 0x80000006, mask=0xff800800
[DEBUG]  Relocation complete.
[INFO ]  microcode: Update skipped, already up-to-date
[INFO ]  Initializing CPU #0
[DEBUG]  CPU: vendor Intel device 306a9
[DEBUG]  CPU: family 06, model 3a, stepping 09
[INFO ]  CPU: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz.
[INFO ]  CPU: platform id 1
[INFO ]  CPU: cpuid(1) 0x306a9
[INFO ]  CPU: AES supported
[INFO ]  CPU: TXT NOT supported
[INFO ]  CPU: VT supported
[DEBUG]  IA32_FEATURE_CONTROL already locked; VMX status: enabled
[DEBUG]  IA32_FEATURE_CONTROL already locked
[DEBUG]  cpu: energy policy set to 6
[DEBUG]  model_x06ax: frequency set to 3500
[INFO ]  Turbo is available but hidden
[INFO ]  Turbo is available and visible
[INFO ]  CPU #0 initialized
[INFO ]  Initializing CPU #2
[INFO ]  Initializing CPU #1
[INFO ]  Initializing CPU #3
[DEBUG]  CPU: vendor Intel device 306a9
[DEBUG]  CPU: family 06, model 3a, stepping 09
[DEBUG]  CPU: vendor Intel device 306a9
[DEBUG]  CPU: family 06, model 3a, stepping 09
[INFO ]  CPU: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz.
[INFO ]  CPU: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz.
[INFO ]  CPU: platform id 1
[INFO ]  CPU: platform id 1
[INFO ]  CPU: cpuid(1) 0x306a9
[INFO ]  CPU: cpuid(1) 0x306a9
[INFO ]  CPU: AES supported
[INFO ]  CPU: TXT NOT supported
[INFO ]  CPU: VT supported
[INFO ]  CPU: AES supported
[INFO ]  CPU: TXT NOT supported
[INFO ]  CPU: VT supported
[DEBUG]  IA32_FEATURE_CONTROL already locked; VMX status: enabled
[DEBUG]  IA32_FEATURE_CONTROL already locked; VMX status: enabled
[DEBUG]  IA32_FEATURE_CONTROL already locked
[DEBUG]  IA32_FEATURE_CONTROL already locked
[DEBUG]  cpu: energy policy set to 6
[DEBUG]  cpu: energy policy set to 6
[DEBUG]  model_x06ax: frequency set to 3500
[DEBUG]  model_x06ax: frequency set to 3500
[INFO ]  CPU #1 initialized
[INFO ]  CPU #3 initialized
[INFO ]  Initializing CPU #4
[INFO ]  Initializing CPU #5
[DEBUG]  CPU: vendor Intel device 306a9
[DEBUG]  CPU: family 06, model 3a, stepping 09
[DEBUG]  CPU: vendor Intel device 306a9
[DEBUG]  CPU: family 06, model 3a, stepping 09
[INFO ]  CPU: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz.
[INFO ]  CPU: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz.
[INFO ]  CPU: platform id 1
[INFO ]  CPU: platform id 1
[INFO ]  CPU: cpuid(1) 0x306a9
[INFO ]  CPU: cpuid(1) 0x306a9
[INFO ]  CPU: AES supported
[INFO ]  CPU: TXT NOT supported
[INFO ]  CPU: VT supported
[INFO ]  CPU: AES supported
[INFO ]  CPU: TXT NOT supported
[INFO ]  CPU: VT supported
[DEBUG]  IA32_FEATURE_CONTROL already locked; VMX status: enabled
[DEBUG]  IA32_FEATURE_CONTROL already locked; VMX status: enabled
[DEBUG]  IA32_FEATURE_CONTROL already locked
[DEBUG]  IA32_FEATURE_CONTROL already locked
[DEBUG]  cpu: energy policy set to 6
[DEBUG]  cpu: energy policy set to 6
[DEBUG]  model_x06ax: frequency set to 3500
[DEBUG]  model_x06ax: frequency set to 3500
[INFO ]  CPU #4 initialized
[INFO ]  CPU #5 initialized
[INFO ]  Initializing CPU #7
[INFO ]  Initializing CPU #6
[DEBUG]  CPU: vendor Intel device 306a9
[DEBUG]  CPU: family 06, model 3a, stepping 09
[DEBUG]  CPU: vendor Intel device 306a9
[DEBUG]  CPU: family 06, model 3a, stepping 09
[INFO ]  CPU: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz.
[INFO ]  CPU: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz.
[INFO ]  CPU: platform id 1
[INFO ]  CPU: platform id 1
[INFO ]  CPU: cpuid(1) 0x306a9
[INFO ]  CPU: cpuid(1) 0x306a9
[INFO ]  CPU: AES supported
[INFO ]  CPU: TXT NOT supported
[INFO ]  CPU: VT supported
[INFO ]  CPU: AES supported
[INFO ]  CPU: TXT NOT supported
[INFO ]  CPU: VT supported
[DEBUG]  IA32_FEATURE_CONTROL already locked; VMX status: enabled
[DEBUG]  IA32_FEATURE_CONTROL already locked; VMX status: enabled
[DEBUG]  IA32_FEATURE_CONTROL already locked
[DEBUG]  IA32_FEATURE_CONTROL already locked
[DEBUG]  cpu: energy policy set to 6
[DEBUG]  cpu: energy policy set to 6
[DEBUG]  model_x06ax: frequency set to 3500
[DEBUG]  model_x06ax: frequency set to 3500
[INFO ]  CPU #6 initialized
[INFO ]  CPU #7 initialized
[DEBUG]  CPU: vendor Intel device 306a9
[DEBUG]  CPU: family 06, model 3a, stepping 09
[INFO ]  CPU: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz.
[INFO ]  CPU: platform id 1
[INFO ]  CPU: cpuid(1) 0x306a9
[INFO ]  CPU: AES supported
[INFO ]  CPU: TXT NOT supported
[INFO ]  CPU: VT supported
[DEBUG]  IA32_FEATURE_CONTROL already locked; VMX status: enabled
[DEBUG]  IA32_FEATURE_CONTROL already locked
[DEBUG]  cpu: energy policy set to 6
[DEBUG]  model_x06ax: frequency set to 3500
[INFO ]  CPU #2 initialized
[INFO ]  bsp_do_flight_plan done after 875 msecs.
[DEBUG]  SMI_STS: 
[DEBUG]  GPE0_STS: GPIO14 GPIO11 GPIO10 GPIO9 GPIO7 GPIO6 
[DEBUG]  ALT_GP_SMI_STS: GPI14 GPI13 GPI11 GPI10 GPI9 GPI7 GPI6 GPI5 GPI4 GPI3 GPI2 GPI1 
[DEBUG]  TCO_STS: 
[DEBUG]  Locking SMM.
[DEBUG]  CPU_CLUSTER: 0 init finished in 1153 msecs
[DEBUG]  PCI: 00:00.0 init
[DEBUG]  Disabling PEG12.
[DEBUG]  Disabling PEG11.
[DEBUG]  Disabling Device 4.
[DEBUG]  Disabling PEG60.
[DEBUG]  Disabling Device 7.
[DEBUG]  Set BIOS_RESET_CPL
[DEBUG]  CPU TDP: 77 Watts
[DEBUG]  PCI: 00:00.0 init finished in 18 msecs
[DEBUG]  PCI: 00:01.0 init
[DEBUG]  PCI: 00:01.0 init finished in 0 msecs
[DEBUG]  PCI: 00:02.0 init
[INFO ]  CBFS: Found 'vbt.bin' @0x42d80 size 0x4dd in mcache @0x7ffdd1b0
[INFO ]  Found a VBT of 3902 bytes after decompression
[INFO ]  GMA: Found VBT in CBFS
[INFO ]  GMA: Found valid VBT in CBFS
[DEBUG]  GT Power Management Init
[DEBUG]  IVB GT2 35W Power Meter Weights
[DEBUG]  GT Power Management Init (post VBIOS)
[DEBUG]  PCI: 00:02.0 init finished in 41 msecs
[DEBUG]  PCI: 00:14.0 init
[DEBUG]  XHCI: Setting up controller.. done.
[DEBUG]  PCI: 00:14.0 init finished in 3 msecs
[DEBUG]  PCI: 00:16.0 init
[DEBUG]  ME: FW Partition Table      : OK
[DEBUG]  ME: Bringup Loader Failure  : NO
[DEBUG]  ME: Firmware Init Complete  : YES
[DEBUG]  ME: Manufacturing Mode      : YES
[DEBUG]  ME: Boot Options Present    : NO
[DEBUG]  ME: Update In Progress      : NO
[DEBUG]  ME: Current Working State   : Normal
[DEBUG]  ME: Current Operation State : M0 with UMA
[DEBUG]  ME: Current Operation Mode  : Normal
[DEBUG]  ME: Error Code              : No Error
[DEBUG]  ME: Progress Phase          : Host Communication
[DEBUG]  ME: Power Management Event  : Pseudo-global reset
[DEBUG]  ME: Progress Phase State    : Host communication established
[NOTE ]  ME: BIOS path: Normal
[DEBUG]  No CMOS option 'me_state'.
[DEBUG]  No CMOS option 'me_state_prev'.
[DEBUG]  ME: me_state=0, me_state_prev=0
[DEBUG]  ME: Extend SHA-256: 88cdce2cfa55c4884272f0b35648cbb01caa6e7b03bbd7f814da3bd6cc758d71
[INFO ]  ME: MBP item header 00020103
[INFO ]  ME: MBP item header 00050102
[INFO ]  ME: MBP item header 00020501
[INFO ]  ME: MBP item header 00020201
[INFO ]  ME: MBP item header 02030101
[INFO ]  ME: MBP item header 02060301
[INFO ]  ME: MBP item header 02090401
[DEBUG]  ME: found version 8.0.4.1441
[DEBUG]  ME Capability: Full Network manageability                : disabled
[DEBUG]  ME Capability: Regular Network manageability             : disabled
[DEBUG]  ME Capability: Manageability                             : disabled
[DEBUG]  ME Capability: Small business technology                 : disabled
[DEBUG]  ME Capability: Level III manageability                   : disabled
[DEBUG]  ME Capability: IntelR Anti-Theft (AT)                    : disabled
[DEBUG]  ME Capability: IntelR Capability Licensing Service (CLS) :  enabled
[DEBUG]  ME Capability: IntelR Power Sharing Technology (MPC)     :  enabled
[DEBUG]  ME Capability: ICC Over Clocking                         :  enabled
[DEBUG]  ME Capability: Protected Audio Video Path (PAVP)         :  enabled
[DEBUG]  ME Capability: IPV6                                      : disabled
[DEBUG]  ME Capability: KVM Remote Control (KVM)                  : disabled
[DEBUG]  ME Capability: Outbreak Containment Heuristic (OCH)      : disabled
[DEBUG]  ME Capability: Virtual LAN (VLAN)                        :  enabled
[DEBUG]  ME Capability: TLS                                       : disabled
[DEBUG]  ME Capability: Wireless LAN (WLAN)                       : disabled
[DEBUG]  PCI: 00:16.0 init finished in 212 msecs
[DEBUG]  PCI: 00:1a.0 init
[DEBUG]  EHCI: Setting up controller.. done.
[DEBUG]  PCI: 00:1a.0 init finished in 3 msecs
[DEBUG]  PCI: 00:1b.0 init
[DEBUG]  Azalia: base = 0xfdaec000
[DEBUG]  Azalia: codec_mask = 09
[DEBUG]  azalia_audio: Initializing codec #3
[DEBUG]  azalia_audio: codec viddid: 80862806
[DEBUG]  azalia_audio: verb_size: 16
[DEBUG]  azalia_audio: verb loaded.
[DEBUG]  azalia_audio: Initializing codec #0
[DEBUG]  azalia_audio: codec viddid: 10ec0887
[DEBUG]  azalia_audio: verb_size: 60
[DEBUG]  azalia_audio: verb loaded.
[DEBUG]  PCI: 00:1b.0 init finished in 39 msecs
[DEBUG]  PCI: 00:1c.0 init
[DEBUG]  Initializing PCH PCIe bridge.
[DEBUG]  PCI: 00:1c.0 init finished in 3 msecs
[DEBUG]  PCI: 00:1c.4 init
[DEBUG]  Initializing PCH PCIe bridge.
[DEBUG]  PCI: 00:1c.4 init finished in 3 msecs
[DEBUG]  PCI: 00:1c.5 init
[DEBUG]  Initializing PCH PCIe bridge.
[DEBUG]  PCI: 00:1c.5 init finished in 3 msecs
[DEBUG]  PCI: 00:1c.6 init
[DEBUG]  Initializing PCH PCIe bridge.
[DEBUG]  PCI: 00:1c.6 init finished in 3 msecs
[DEBUG]  PCI: 00:1d.0 init
[DEBUG]  EHCI: Setting up controller.. done.
[DEBUG]  PCI: 00:1d.0 init finished in 3 msecs
[DEBUG]  PCI: 00:1f.0 init
[DEBUG]  pch: lpc_init
[INFO ]  PCH: detected Z77, device id: 0x1e44, rev id 0x4
[DEBUG]  IOAPIC: Initializing IOAPIC at 0xfec00000
[DEBUG]  IOAPIC: ID = 0x00
[DEBUG]  IOAPIC: 24 interrupts
[DEBUG]  IOAPIC: Clearing IOAPIC at 0xfec00000
[DEBUG]  IOAPIC: Bootstrap Processor Local APIC = 0x00
[INFO ]  Set power off after power failure.
[INFO ]  NMI sources disabled.
[DEBUG]  PantherPoint PM init
[DEBUG]  RTC: failed = 0x0
[DEBUG]  RTC Init
[DEBUG]  apm_control: Disabling ACPI.
[DEBUG]  APMC done.
[DEBUG]  pch_spi_init
[DEBUG]  PCI: 00:1f.0 init finished in 46 msecs
[DEBUG]  PCI: 00:1f.2 init
[DEBUG]  SATA: Initializing...
[DEBUG]  SATA: Controller in AHCI mode.
[DEBUG]  ABAR: 0xfdaeb000
[DEBUG]  PCI: 00:1f.2 init finished in 8 msecs
[DEBUG]  PCI: 00:1f.3 init
[DEBUG]  PCI: 00:1f.3 init finished in 0 msecs
[DEBUG]  PCI: 04:00.0 init
[DEBUG]  PCI: 04:00.0 init finished in 0 msecs
[DEBUG]  PNP: 002e.2 init
[DEBUG]  PNP: 002e.2 init finished in 0 msecs
[DEBUG]  PNP: 002e.5 init
[DEBUG]  PNP: 002e.5 init finished in 0 msecs
[DEBUG]  PNP: 002e.8 init
[DEBUG]  PNP: 002e.8 init finished in 0 msecs
[DEBUG]  PNP: 002e.a init
[DEBUG]  PNP: 002e.a init finished in 0 msecs
[DEBUG]  PNP: 002e.b init
[DEBUG]  PNP: 002e.b init finished in 0 msecs
[DEBUG]  PNP: 002e.f init
[DEBUG]  PNP: 002e.f init finished in 0 msecs
[DEBUG]  PNP: 002e.108 init
[DEBUG]  PNP: 002e.108 init finished in 0 msecs
[DEBUG]  PNP: 002e.109 init
[DEBUG]  PNP: 002e.109 init finished in 0 msecs
[DEBUG]  PNP: 002e.209 init
[DEBUG]  PNP: 002e.209 init finished in 0 msecs
[DEBUG]  PNP: 002e.509 init
[DEBUG]  PNP: 002e.509 init finished in 0 msecs
[DEBUG]  PNP: 002e.d init
[DEBUG]  PNP: 002e.d init finished in 0 msecs
[DEBUG]  PNP: 002e.14 init
[DEBUG]  PNP: 002e.14 init finished in 0 msecs
[DEBUG]  PNP: 002e.16 init
[DEBUG]  PNP: 002e.16 init finished in 0 msecs
[INFO ]  Devices initialized
[DEBUG]  BS: BS_DEV_INIT run times (exec / console): 619 / 1130 ms
[INFO ]  Finalize devices...
[DEBUG]  PCI: 00:1f.0 final
[INFO ]  Manufacturer: ef
[WARN ]  SF: no match for ID 7017 0000
[DEBUG]  flash size 0x800000 bytes
[INFO ]  SF: Detected 00 0000 with sector size 0x1000, total 0x800000
[DEBUG]  apm_control: Finalizing SMM.
[DEBUG]  APMC done.
[INFO ]  Devices finalized
[DEBUG]  BS: BS_POST_DEVICE run times (exec / console): 5 / 28 ms
[INFO ]  CBFS: Found 'fallback/dsdt.aml' @0x40ac0 size 0x226e in mcache @0x7ffdd184
[WARN ]  CBFS: 'fallback/slic' not found.
[INFO ]  ACPI: Writing ACPI tables at 7ff46000.
[DEBUG]  ACPI:    * FACS
[DEBUG]  ACPI:    * FACP
[DEBUG]  ACPI: added table 1/32, length now 44
[DEBUG]  Found 1 CPU(s) with 8 core(s) each.
[DEBUG]  PSS: 3501MHz power 77000 control 0x2700 status 0x2700
[DEBUG]  PSS: 3500MHz power 77000 control 0x2300 status 0x2300
[DEBUG]  PSS: 2800MHz power 56733 control 0x1c00 status 0x1c00
[DEBUG]  PSS: 2400MHz power 46310 control 0x1800 status 0x1800
[DEBUG]  PSS: 2000MHz power 36756 control 0x1400 status 0x1400
[DEBUG]  PSS: 1600MHz power 27975 control 0x1000 status 0x1000
[DEBUG]  PSS: 3501MHz power 77000 control 0x2700 status 0x2700
[DEBUG]  PSS: 3500MHz power 77000 control 0x2300 status 0x2300
[DEBUG]  PSS: 2800MHz power 56733 control 0x1c00 status 0x1c00
[DEBUG]  PSS: 2400MHz power 46310 control 0x1800 status 0x1800
[DEBUG]  PSS: 2000MHz power 36756 control 0x1400 status 0x1400
[DEBUG]  PSS: 1600MHz power 27975 control 0x1000 status 0x1000
[DEBUG]  PSS: 3501MHz power 77000 control 0x2700 status 0x2700
[DEBUG]  PSS: 3500MHz power 77000 control 0x2300 status 0x2300
[DEBUG]  PSS: 2800MHz power 56733 control 0x1c00 status 0x1c00
[DEBUG]  PSS: 2400MHz power 46310 control 0x1800 status 0x1800
[DEBUG]  PSS: 2000MHz power 36756 control 0x1400 status 0x1400
[DEBUG]  PSS: 1600MHz power 27975 control 0x1000 status 0x1000
[DEBUG]  PSS: 3501MHz power 77000 control 0x2700 status 0x2700
[DEBUG]  PSS: 3500MHz power 77000 control 0x2300 status 0x2300
[DEBUG]  PSS: 2800MHz power 56733 control 0x1c00 status 0x1c00
[DEBUG]  PSS: 2400MHz power 46310 control 0x1800 status 0x1800
[DEBUG]  PSS: 2000MHz power 36756 control 0x1400 status 0x1400
[DEBUG]  PSS: 1600MHz power 27975 control 0x1000 status 0x1000
[DEBUG]  PSS: 3501MHz power 77000 control 0x2700 status 0x2700
[DEBUG]  PSS: 3500MHz power 77000 control 0x2300 status 0x2300
[DEBUG]  PSS: 2800MHz power 56733 control 0x1c00 status 0x1c00
[DEBUG]  PSS: 2400MHz power 46310 control 0x1800 status 0x1800
[DEBUG]  PSS: 2000MHz power 36756 control 0x1400 status 0x1400
[DEBUG]  PSS: 1600MHz power 27975 control 0x1000 status 0x1000
[DEBUG]  PSS: 3501MHz power 77000 control 0x2700 status 0x2700
[DEBUG]  PSS: 3500MHz power 77000 control 0x2300 status 0x2300
[DEBUG]  PSS: 2800MHz power 56733 control 0x1c00 status 0x1c00
[DEBUG]  PSS: 2400MHz power 46310 control 0x1800 status 0x1800
[DEBUG]  PSS: 2000MHz power 36756 control 0x1400 status 0x1400
[DEBUG]  PSS: 1600MHz power 27975 control 0x1000 status 0x1000
[DEBUG]  PSS: 3501MHz power 77000 control 0x2700 status 0x2700
[DEBUG]  PSS: 3500MHz power 77000 control 0x2300 status 0x2300
[DEBUG]  PSS: 2800MHz power 56733 control 0x1c00 status 0x1c00
[DEBUG]  PSS: 2400MHz power 46310 control 0x1800 status 0x1800
[DEBUG]  PSS: 2000MHz power 36756 control 0x1400 status 0x1400
[DEBUG]  PSS: 1600MHz power 27975 control 0x1000 status 0x1000
[DEBUG]  PSS: 3501MHz power 77000 control 0x2700 status 0x2700
[DEBUG]  PSS: 3500MHz power 77000 control 0x2300 status 0x2300
[DEBUG]  PSS: 2800MHz power 56733 control 0x1c00 status 0x1c00
[DEBUG]  PSS: 2400MHz power 46310 control 0x1800 status 0x1800
[DEBUG]  PSS: 2000MHz power 36756 control 0x1400 status 0x1400
[DEBUG]  PSS: 1600MHz power 27975 control 0x1000 status 0x1000
[DEBUG]  PCI space above 4GB MMIO is at 0x170600000, len = 0xe8fa00000
[DEBUG]  Generating ACPI PIRQ entries
[DEBUG]  ACPI:    * SSDT
[DEBUG]  ACPI: added table 2/32, length now 52
[DEBUG]  ACPI:    * MCFG
[DEBUG]  ACPI: added table 3/32, length now 60
[DEBUG]  IOAPIC: 24 interrupts
[DEBUG]  ACPI:    * APIC
[DEBUG]  ACPI: added table 4/32, length now 68
[DEBUG]  ACPI:    * SPCR
[DEBUG]  ACPI: added table 5/32, length now 76
[DEBUG]  current = 7ff4acb0
[DEBUG]  ACPI:    * HPET
[DEBUG]  ACPI: added table 6/32, length now 84
[INFO ]  ACPI: done.
[DEBUG]  ACPI tables: 19696 bytes.
[DEBUG]  smbios_write_tables: 7ff3e000
[DEBUG]  SMBIOS firmware version is set to coreboot_version: '4.21-265-g5aa8d1d6add1-dirty'
[INFO ]  Create SMBIOS type 16
[INFO ]  Create SMBIOS type 17
[INFO ]  Create SMBIOS type 20
[DEBUG]  SMBIOS tables: 1034 bytes.
[DEBUG]  Writing table forward entry at 0x00000500
[DEBUG]  Wrote coreboot table at: 0x00000500, 0x10 bytes, checksum dfe7
[DEBUG]  Writing coreboot table at 0x7ff6a000
[INFO ]  CBFS: Found 'cmos_layout.bin' @0x43400 size 0x638 in mcache @0x7ffdd208
[DEBUG]   0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES
[DEBUG]   1. 0000000000001000-000000000009ffff: RAM
[DEBUG]   2. 00000000000a0000-00000000000fffff: RESERVED
[DEBUG]   3. 0000000000100000-000000007ff3dfff: RAM
[DEBUG]   4. 000000007ff3e000-000000007ff85fff: CONFIGURATION TABLES
[DEBUG]   5. 000000007ff86000-000000007ffcffff: RAMSTAGE
[DEBUG]   6. 000000007ffd0000-000000007fffffff: CONFIGURATION TABLES
[DEBUG]   7. 0000000080000000-000000008e9fffff: RESERVED
[DEBUG]   8. 00000000f0000000-00000000f3ffffff: RESERVED
[DEBUG]   9. 0000000100000000-00000001705fffff: RAM
[DEBUG]  Wrote coreboot table at: 0x7ff6a000, 0x9e4 bytes, checksum 1ecc
[DEBUG]  coreboot table: 2556 bytes.
[DEBUG]  IMD ROOT    0. 0x7ffff000 0x00001000
[DEBUG]  IMD SMALL   1. 0x7fffe000 0x00001000
[DEBUG]  CONSOLE     2. 0x7ffde000 0x00020000
[DEBUG]  RO MCACHE   3. 0x7ffdd000 0x00000334
[DEBUG]  TIME STAMP  4. 0x7ffdc000 0x00000910
[DEBUG]  MEM INFO    5. 0x7ffdb000 0x00000f48
[DEBUG]  AFTER CAR   6. 0x7ffd0000 0x0000b000
[DEBUG]  RAMSTAGE    7. 0x7ff85000 0x0004b000
[DEBUG]  SMM BACKUP  8. 0x7ff75000 0x00010000
[DEBUG]  IGD OPREGION 9. 0x7ff72000 0x00002f3e
[DEBUG]  COREBOOT   10. 0x7ff6a000 0x00008000
[DEBUG]  ACPI       11. 0x7ff46000 0x00024000
[DEBUG]  SMBIOS     12. 0x7ff3e000 0x00008000
[DEBUG]  IMD small region:
[DEBUG]    IMD ROOT    0. 0x7fffec00 0x00000400
[DEBUG]    FMAP        1. 0x7fffeb20 0x000000e0
[DEBUG]    ROMSTAGE    2. 0x7fffeb00 0x00000004
[DEBUG]    ROMSTG STCK 3. 0x7fffea40 0x000000a8
[DEBUG]    ACPI GNVS   4. 0x7fffe940 0x00000100
[DEBUG]  BS: BS_WRITE_TABLES run times (exec / console): 2 / 528 ms
[INFO ]  CBFS: Found 'fallback/payload' @0x46f40 size 0x103ab3 in mcache @0x7ffdd274
[DEBUG]  Checking segment from ROM address 0xffc5716c
[DEBUG]  Checking segment from ROM address 0xffc57188
[DEBUG]  Loading segment from ROM address 0xffc5716c
[DEBUG]    code (compression=1)
[DEBUG]    New segment dstaddr 0x00800000 memsize 0x1000000 srcaddr 0xffc571a4 filesize 0x103a7b
[DEBUG]  Loading Segment: addr: 0x00800000 memsz: 0x0000000001000000 filesz: 0x0000000000103a7b
[DEBUG]  using LZMA
[DEBUG]  Loading segment from ROM address 0xffc57188
[DEBUG]    Entry Point 0x008035f8
[DEBUG]  BS: BS_PAYLOAD_LOAD run times (exec / console): 303 / 51 ms
[DEBUG]  ICH-NM10-PCH: watchdog disabled
[DEBUG]  Jumping to boot code at 0x008035f8(0x7ff6a000)
cbmem.log (text/x-log, 135.7 KB) - not displayed
defconfig (application/octet-stream, 915 B) - not displayed
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.