Getting FSPM XIP base does not match Error, after flashing the fspm stitched Coreboot

hi ,
I am trying to stitch the fspm.bin binary in the coreboot file by using the
below steps.















*sudo cbfstool "${IMAGE}" remove -r FW_MAIN_A -n fspm.binsudo cbfstool
"${IMAGE}" remove -r FW_MAIN_B -n fspm.binsudo cbfstool "${IMAGE}" remove
-n fspm.binsudo cbfstool "${IMAGE}" expand -r FW_MAIN_Asudo cbfstool
"${IMAGE}" expand -r FW_MAIN_Bsudo cbfstool "${IMAGE}" add -t fsp -r
FW_MAIN_A  --xip -n fspm.bin -f "${FSPM}"sudo cbfstool "${IMAGE}" add -t
fsp -r FW_MAIN_B --xip -n fspm.bin -f "${FSPM}"*
*sudo cbfstool "${IMAGE}" add -t fsp  --xip -n fspm.bin -f "${FSPM}"*

After stitching fspm.bin binary file in the coreboot file. i flashed the
coreboot , its failing to boot and stuck at the below error.


*CBFS: Found 'fspm.bin' @0xc3fc0 size 0xd0000 in mcache @0xfef87804FSPM XIP
base does not match: 0x00510000 vs 0xf95d3fe4*

I can be able to stitch the fspm.bin at the correct offset in the CBFS, but
i can't update the fspm XIP

Any help is much appreciated.

Thanks in advance
--sameer.

_______________________________________________
coreboot mailing list -- [email protected]
To unsubscribe send an email to [email protected]