Re: Porting Coreboot to a Mini PC
Matt DeVillier <[email protected]>
| Newsgroups | gmane.linux.bios |
|---|---|
| Message-ID | <CAFTm+6C29v+xhAb726utZLWtjSo5WHg7xT+3tP09CecZF-F+-w@mail.gmail.com> |
that's still going to cost more than $400. Add a zero and I'll think about it ;-) On Wed, Apr 3, 2024, 7:30 PM Mason Corkern <[email protected]> wrote: > Yeah, I only want the port, not ongoing support. > > Thanks, > Mason Corkern > ------------------------------ > *From:* Matt DeVillier <[email protected]> > *Sent:* Wednesday, April 3, 2024 8:25 PM > *To:* Mason Corkern <[email protected]> > *Cc:* [email protected] <[email protected]> > *Subject:* Re: [coreboot] Porting Coreboot to a Mini PC > > *[EXTERNAL SENDER]* > The minisforum MiniPC you have linked is a completely different device > from the one offered by Purism/Nitrokey; the only thing similar is the form > factor. > > coreboot support has to be added on a per-mainboard basis, so the > Minisforum device you linked would need to be ported by someone who > understands coreboot and x86 firmware (or who has a lot of free time to > learn). And the mainboard on the device would need to be unencumbered by > things like Intel Bootguard (which fortunately IME most devices like that > are, but it's not a guarantee). > > If you want not just a coreboot port, but ongoing support, it's going to > cost you a heck of a lot more than the $400 you think Purism/Nitrokey are > "overcharging" by. And I say that as the developer who did the initial port > on the Purism Librem Mini/Mini v2 boards. > > -Matt > (speaking on behalf of myself, not any present or past employer) > > On Wed, Apr 3, 2024 at 5:43 PM Mason Corkern <[email protected]> wrote: > > Greetings, > > I recently purchased a Mini PC from mini forums, a company based in Hong > Kong [1]. I want to replace their custom BIOS with Coreboot since it's > FOSS. Prisim and Nitro has been able to install Coreboot, but they said > they did a custom port for the motherboard/cpu and they overcharge by $400 > and justify it due to the R&D spent on porting Coreboot to the minipc [2]. > Has anyone tried porting Coreboot for similar boars and/or made a tutorial? > I couldn't find it when I googled around and looked in docs. > > > > 1. Minisforum NAB6/NPB7 Intel i7-12650H/Intel i7-13700H > <https://store.minisforum.com/products/minisforum-nab6?variant=44164535288053> > 2. Purism– Librem Mini <https://puri.sm/products/librem-mini/> and NitroPC > 1 | shop.nitrokey.com <https://shop.nitrokey.com/shop/nitropc-1-132>. > 3. > > Thanks, > Mason Corkern > _______________________________________________ > coreboot mailing list -- [email protected] > To unsubscribe send an email to [email protected] > > _______________________________________________ coreboot mailing list -- [email protected] To unsubscribe send an email to [email protected]