Re: regarding coreboot source level debugging

"Naresh G. Solanki" <[email protected]>
Newsgroups gmane.linux.bios
Message-ID <CAB-+3=BTOah=XGu6SZdNdW4ejX+rB_6V6E8DBUSKb2RijowWfw@mail.gmail.com>
Hi Ritul,

It's possible to use SoC vendor specific tools.

For example Intel System Debugger supports loading debug
symbols(bootblock.debug, romstage.debug, ramstage.debug etc) and do source
level debug.

To debug bootblock from reset vector:
enable reset break,
load bootblock.debug,
power on the platform.
This will allow for doing source level debug.


Regards,
Naresh Solanki


On Sat, 23 Nov, 2024, 8:43 pm ritul guru, <[email protected]> wrote:

> Hi All,
> Recently had a need to debug the coreboot at source level.
> Is it that we can only debug coreboot from romstage and not in bootblock
> or verstage via gdb or any other source level debugger?
> any pointers will be helpful here.
>
> I see a few pointers below to use gdb for coreboot source level debugging,
> any other guidelines or help available for the same?
> https://www.coreboot.org/Debugging
>
>
>
>
> *Thanks & RegardsRitul Guru+91-9916513186*
> _______________________________________________
> coreboot mailing list -- [email protected]
> To unsubscribe send an email to [email protected]
>

_______________________________________________
coreboot mailing list -- [email protected]
To unsubscribe send an email to [email protected]
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.