[coreboot - Bug #589] (New) X230 eDP panel not detected by libgfxinit but works in Linux
Jens Moelzer <[email protected]>
| Newsgroups | gmane.linux.bios |
|---|---|
| Message-ID | <[email protected]> |
Issue #589 has been reported by Jens Moelzer. ---------------------------------------- Bug #589: X230 eDP panel not detected by libgfxinit but works in Linux https://ticket.coreboot.org/issues/589 * Author: Jens Moelzer * Status: New * Priority: Normal * Target version: none * Start date: 2025-04-09 * Affected versions: 25.03 * Affected hardware: X230 eDP ---------------------------------------- I have a X230 with a eDP panel (LP125WF4-SPB1). My FHD mod board is self designed but somewhat similar to the nitrocaster mod (just much simpler). It takes DP_D from the docking port (2 lanes plus AUX plus HDP) and BACKLIGHT_ON + PANEL_BKLT_CTRL from the LVDS connector and connects everything directly to the eDP panel. It is totally passive and has no MCU and no EEPROM. I also attached the schematic (dasher-fhd.pdf). The panel stays blank until Linux boots and from the debug output it seems libgfxinit does not detect it at all. Once drm/i915 in Linux takes over the panel starts up and works perfectly fine including backlight control. From the log it seems that coreboot/libgfxinit for some reason can't read the EDID but Linux has no problem reading the EDID. An external display attached to the mini-DP port is detected by libgfxinit and does work with coreboot. I'm using coreboot 25.03 with "ThinkPad X230 eDP Mod (2K/FHD)" as mainboard and libgfxinit with linear framebuffer and edk2 payload. Though I also tried other payloads, gfx initialization settings, various changes to `gma-mainboard.ads`, `devicetree.cb` and other hacks I though worth a try. I also played around a lot with modifications to the VBT (explicitly configuring my panel including DTD, enabling edidless, ...). But nothing made any difference. Attached you find a coreboot log with Ada debug enabled (cbmem.log) and a full Linux boot log with `drm.debug=0x1ff` (linux.log) from the same boot since I though it might help to see what i915 is doing to get the panel working. ---Files-------------------------------- cbmem.log (58.3 KB) linux.log (301 KB) dasher-fhd.pdf (74.4 KB) -- You have received this notification because you have either subscribed to it, or are involved in it. To change your notification preferences, please click here: https://ticket.coreboot.org/my/account _______________________________________________ coreboot mailing list -- [email protected] To unsubscribe send an email to [email protected]