[coreboot - Bug #614] USE_OPTION_TABLE=y with HAVE_ACPI_RESUME=y build Error 1 on baytrail

Issue #614 has been updated by Walter Sonius.


Tried adding `C_ENV_BOOTBLOCK_SIZE` from the `emulation/qemu-i440fx/Kconfig` example tried 0x80000 and 0x160000 0x1600000 all with same error, any suggestion for a size?

```
config C_ENV_BOOTBLOCK_SIZE
        hex
        default 0x80000
```
If I revert patch [Stop resetting CMOS during s3 resume CB:78288](https://review.coreboot.org/c/coreboot/+/78288) I can get it to build without the `acpi_is_wakeup_s3` errors when serial console coreboot log output is active `CONFIG_CONSOLE_SERIAL=y`, but it will probably reset CMOS on acpi S3 as side effect.

There has been more cleanup patch series "replace_option_api" and "clean_Includes" which might have affected this behavior.

----------------------------------------
Bug #614: USE_OPTION_TABLE=y with HAVE_ACPI_RESUME=y build Error 1 on baytrail
https://ticket.coreboot.org/issues/614#change-2169

* Author: Walter Sonius
* Status: New
* Priority: Normal
* Target version: none
* Start date: 2025-10-19
* Affected versions: main
* Affected hardware: baytrail
----------------------------------------
On multiple tested Baytrail platforms, building coreboot errors when enabling CMOS support `USE_OPTION_TABLE` and `HAVE_ACPI_RESUME` active, while the later is the default for most platforms.

Affected hardware:
* bostentech/gbyt4
* jetwayipc/nf9n-2930 [CB:89279](https://review.coreboot.org/c/coreboot/+/89279)
* lenovo/h500s_10157 [CB:89170](https://review.coreboot.org/c/coreboot/+/89170)

Affected coreboot versions:
```
coreboot 25.06-77-g812d0e2f626d
coreboot 25.09-70-g98a54453284e
```

Reproduce:
```
make distclean
touch .config
./util/scripts/config --enable VENDOR_BOSTENTECH
./util/scripts/config --enable BOARD_BOSTENTECH_GBYT4

./util/scripts/config --enable USE_OPTION_TABLE
make olddefconfig

make
```

Error message:
```
...
    CC         bootblock/southbridge/intel/common/spi.o
    CC         bootblock/superio/ite/common/early_serial.o
    CC         bootblock/superio/ite/common/gpio.o
    LINK       cbfs/fallback/bootblock.debug
/home/neon/Desktop/coreboot/util/crossgcc/xgcc/bin/i386-elf-ld.bfd: section .car.mrc_var LMA wraps around address space
/home/neon/Desktop/coreboot/util/crossgcc/xgcc/bin/i386-elf-ld.bfd: build/bootblock/drivers/pc80/rtc/option.o: in function `acpi_is_wakeup_s3':
/home/neon/Desktop/coreboot/src/include/acpi/acpi.h:1984:(.text.sanitize_cmos+0xf): undefined reference to `acpi_get_sleep_type'
make: *** [src/arch/x86/Makefile.mk:83: build/cbfs/fallback/bootblock.debug] Error 1

```

A workaround to get CMOS support enabled and build is to have `HAVE_ACPI_RESUME` disabled (removed from Kconfig) for these boards. 

However if the board also has an active serial port with `CONFIG_CONSOLE_SERIAL` coreboot console output, you have to disable that as well otherwise you get the Error below (Jetway nf9n-2930).

```
    CC         bootblock/southbridge/intel/common/reset.o
    CC         bootblock/southbridge/intel/common/spi.o
    CC         bootblock/superio/fintek/common/early_serial.o
    LINK       cbfs/fallback/bootblock.debug
/home/neon/Desktop/coreboot/util/crossgcc/xgcc/bin/i386-elf-ld.bfd: section .car.mrc_var LMA wraps around address space
make: *** [src/arch/x86/Makefile.mk:83: build/cbfs/fallback/bootblock.debug] Error 1

```

Contrary the `google/rambi/ninja` image builds without this error:
```
make distclean
touch .config
./util/scripts/config --enable VENDOR_GOOGLE
./util/scripts/config --enable BOARD_GOOGLE_NINJA

./util/scripts/config --enable USE_OPTION_TABLE
make olddefconfig

make
```



-- 
You have received this notification because you have either subscribed to it, or are involved in it.
To change your notification preferences, please click here: https://ticket.coreboot.org/my/account
_______________________________________________
coreboot mailing list -- [email protected]
To unsubscribe send an email to [email protected]