Re: Same Old Speed Issues
Robert Rawlins <[email protected]>
| Newsgroups | gmane.linux.bluez.devel |
|---|---|
| Message-ID | <[email protected]> |
Good morning, Another update on my progress with the problem. This morning I had two new version 2.0 + EDR dongles arrive in the post, both from different manufacturer and both listed on the compatibility list for bluez. I've run some tests this morning on these other two dongles and receive the exact same problem, still not getting anything over 25kBytes/s. I'm running out of different tests to run, I've tried different dongles, system boards, linux builds, kernel versions, bluez versions and every single one keep presenting the same problems, Am I missing something? Thanks guys, I would really appreciate any ideas you might have. Rob From: [email protected]: [email protected]: Mon, 21 Jan 2008 16:11:14 +0000Subject: Re: [Bluez-devel] Same Old Speed Issues Hello Guys, I've been playing around with this again today, looking into ALC MTU's and things like that but really can't find any resources to suggest why I might be getting such poor speeds, I thought it would be a plug-and-play kinds of affair. I also made an effort to try a couple of other kernel versions, just in case, but they all gave the same results as 2.6.23. Thanks for any further advice guys. Is it worth me giving you some HCI_DUMP information? Is that likely to hold any clues as to what's going wrong? Cheers, Rob > From: [email protected]> To: [email protected]> Date: Fri, 18 Jan 2008 20:17:35 +0000> Subject: Re: [Bluez-devel] Same Old Speed Issues> > On Friday 18 January 2008 15:04:58 Robert Rawlins wrote:> > At the moment I've tried using both ussp-push and open-obex push clients to> > transfer the file, both giving me the same results. I'm achieving roughly> > 25Kbytes/s transfer speed both up and down. I've tried running these same> > dongles from my Windows PC and achieve well over 100kBytes/s. (This is> > transmitting to a Sony k850i handset which is v2.0 + EDR). This would lead> > me to believe its not an issue with the Dongle, more likely something with> > my Linux configuration> >> > Have you tried changing the OBEX block size - try forcing the minimum size to > 64kB-1?> > Cheers,> Tim> > > -------------------------------------------------------------------------> This SF.net email is sponsored by: Microsoft> Defy all challenges. Microsoft(R) Visual Studio 2008.> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/> _______________________________________________> Bluez-devel mailing list> [email protected]> https://lists.sourceforge.net/lists/listinfo/bluez-devel Everything in one place. All new Windows Live! _________________________________________________________________ Share what Santa brought you https://www.mycooluncool.com ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Bluez-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/bluez-devel