Simultaneous ingoing and outgoing connections issue

Alexander Kerner <[email protected]>
Newsgroups gmane.linux.bluez.devel,gmane.linux.bluez.user
Message-ID <[email protected]>
Hello!

I have a problem running bt server and client at one time on one machine.
Inquiry scan and ingoing conenctions do not work when an outgoing connection is
active. I can reproduce it using only rctest utility. The machine is visible to
other bt devices and the clients can connect, but when I start 
"rctest -n <random bt address>" the machine cannot be discovered and the 
incoming connections stop working until rctest is stopped. hcidump shows only
the outgoing connection attempt and nothing else. 

I tested on two different machines with different bt devices and the behaviour
is the same.


Regards

Alexander


1. bluez 3.32, usb dongle EPOX BT-DG02

hci0:   Type: USB
        BD Address: 00:04:61:80:2C:DB ACL MTU: 192:8 SCO MTU: 64:8
        HCI Ver: 1.1 (0x1) HCI Rev: 0x110 LMP Ver: 1.1 (0x1) LMP Subver: 0x110
        Manufacturer: Cambridge Silicon Radio (10)
hci0:   Type: USB
        BD Address: 00:04:61:80:2C:DB ACL MTU: 192:8 SCO MTU: 64:8
        HCI 14.3
        Chip version: BlueCore02-External (ES2)
        Max key size: 56 bit
        SCO mapping:  HCI
hci0:   Type: USB
        BD Address: 00:04:61:80:2C:DB ACL MTU: 192:8 SCO MTU: 64:8
        Features: 0xff 0xff 0x0b 0x00 0x00 0x00 0x00 0x00
                <3-slot packets> <5-slot packets> <encryption> <slot offset> 
                <timing accuracy> <role switch> <hold mode> <sniff mode> 
                <park state> <RSSI> <channel quality> <SCO link> <HV2 packets> 
                <HV3 packets> <u-law log> <A-law log> <CVSD> <paging scheme> 
                <transparent SCO>

2. bluez 3.29, hp compaq 6910p with built-in BT

hci0:	Type: USB
	BD Address: 00:1A:6B:88:42:AA ACL MTU: 1017:8 SCO MTU: 64:8
	HCI Ver: 2.0 (0x3) HCI Rev: 0x2129 LMP Ver: 2.0 (0x3) LMP Subver: 0x41cf
	Manufacturer: Broadcom Corporation (15)
hci0:	Type: USB
	BD Address: 00:1A:6B:88:42:AA ACL MTU: 1017:8 SCO MTU: 64:8
	Firmware 41.65 / 207
hci0:	Type: USB
	BD Address: 00:1A:6B:88:42:AA ACL MTU: 1017:8 SCO MTU: 64:8
	Features: 0xff 0xff 0x8f 0xfe 0x9b 0xf9 0x00 0x80
		<3-slot packets> <5-slot packets> <encryption> <slot offset> 
		<timing accuracy> <role switch> <hold mode> <sniff mode> 
		<park state> <RSSI> <channel quality> <SCO link> <HV2 packets> 
		<HV3 packets> <u-law log> <A-law log> <CVSD> <paging scheme> 
		<power control> <transparent SCO> <broadcast encrypt> 
		<EDR ACL 2 Mbps> <EDR ACL 3 Mbps> <enhanced iscan> 
		<interlaced iscan> <interlaced pscan> <inquiry with RSSI> 
		<extended SCO> <EV4 packets> <EV5 packets> <AFH cap. slave> 
		<AFH class. slave> <3-slot EDR ACL> <5-slot EDR ACL> 
		<AFH cap. master> <AFH class. master> <EDR eSCO 2 Mbps> 
		<EDR eSCO 3 Mbps> <3-slot EDR eSCO> <extended features> 



-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.