Re: Newbie needs help to start

Le 22/1/2008, "Manuel Naranjo" <[email protected]> a écrit:

>> Ok, I got it. But how and where do I generate link keys?
>>
>You don't after the PIN transaction has completed successfully the
>stacks handle the link generation. Links are stored under
>/var/lib/bluetooth/<hci address>/linkkeys take into account that if you
>switch from windows into linux, or if you plug your bluetooth dongle to
>another pc, you will need to remove the linkkey from the file or it will
>never work. It's like when RSA keys changes for a server.

That's a precious information! I found that I had a:

    /var/lib/bluetooth/00:11:E0:02:FA:85/

directory. 00:11:E0:02:FA:85 is my BT adapter address. I deleted this
dir, and tried again: it now works :o) Don't know what happened first
time I tried to connect. I should have done something wrong, and lock
the entire process...

>> So, after I connect the BT device to the rfcomm channel, I can read/write
>> to it using the /dev/rfcomm entry, like if I'm using a /dev/ttySxx ?
>>
>Exactly.

Good :o) I tried, and it seems to wok. At least, the /dev/rfcomm0 entry
is created, and I can open it from my python software. I can't
communicate yet, but I think there is something I don't understand
about the Serial3. I will post another question on the AIRcable ML...

>> If I understand correctly, rfcomm is not supported anymore? If it is the
>> old way, what is the new way?
>>
>rfcomm as a tool isn't supported any more, rfcomm as technology is and
>is the base for most of the bluetooth services. The new way is using the
>dbus serial service. Which will also generate the rfcomm node, in a more
>simple way, but if your distro is not well configured, it can be a
>headhacke to get it to work.

Hope I will find why it does not work as it should under debian.

>> I certainly don't want to deep inside d-bus, but the fact is that python
>> examples on bluez wiki use d-bus module :o/
>>
>You WANT to get deep into bluez dbus api, not into the old hci lib api ;).

Ok. If examples could work, I guess it could be easy to understand.

>> I attached it.
>>
>Where? I don't think this list can take attached files.

I forgot to attached it, anyway! As it now works, I don't need to send
it.

Thanks you very much, Manuel!

--
    Frédéric

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/