Bluetooth dongle not reconnecting

I posted this last week sometime, but here it is again in the hopes my
desperation will yield results.

I can pair my bluetooth mouse and keyboard perfectly fine, but after
rebooting, hidd doesn't re-establish the connections. I've tried
re-connecting manually, but the only way to get them working again, is by
re-pairing. I've tested other dongles which re-connect perfectly fine.

My dmesg displays the following messages whenever I move the mouse:

[  169.162683] hci_acldata_packet: hci0 ACL packet for unknown connection
handle 42
[  169.173697] hci_acldata_packet: hci0 ACL packet for unknown connection
handle 42
[  169.185666] hci_acldata_packet: hci0 ACL packet for unknown connection
handle 42
[  169.196648] hci_acldata_packet: hci0 ACL packet for unknown connection
handle 42
[  169.207684] hci_acldata_packet: hci0 ACL packet for unknown connection
handle 42
[  169.218657] hci_acldata_packet: hci0 ACL packet for unknown connection
handle 42
[  169.230635] hci_acldata_packet: hci0 ACL packet for unknown connection
handle 42
[  169.231635] hci_acldata_packet: hci0 ACL packet for unknown connection
handle 42
[  169.241628] hci_acldata_packet: hci0 ACL packet for unknown connection
handle 42
[  169.252655] hci_acldata_packet: hci0 ACL packet for unknown connection
handle 42
[  169.263642] hci_acldata_packet: hci0 ACL packet for unknown connection
handle 42
[  169.275601] hci_acldata_packet: hci0 ACL packet for unknown connection
handle 42
[  169.286629] hci_acldata_packet: hci0 ACL packet for unknown connection
handle 42

And my hcidump -X -V displays the following:

> ACL data: handle 42 flags 0x02 dlen 10
    L2CAP(d): cid 0x0041 len 6 [psm 0]
      0000: a1 02 00 03 fd 00                                 ......
> ACL data: handle 42 flags 0x02 dlen 10
    L2CAP(d): cid 0x0041 len 6 [psm 0]
      0000: a1 02 00 03 fd 00                                 ......
> ACL data: handle 42 flags 0x02 dlen 10
    L2CAP(d): cid 0x0041 len 6 [psm 0]
      0000: a1 02 00 01 00 00                                 ......
> ACL data: handle 42 flags 0x02 dlen 10
    L2CAP(d): cid 0x0041 len 6 [psm 0]
      0000: a1 02 00 02 fe 00                                 ......
> ACL data: handle 42 flags 0x02 dlen 10
    L2CAP(d): cid 0x0041 len 6 [psm 0]
      0000: a1 02 00 01 ff 00                                 ......
> ACL data: handle 42 flags 0x02 dlen 10
    L2CAP(d): cid 0x0041 len 6 [psm 0]
      0000: a1 02 00 02 ff 00                                 ......
> ACL data: handle 42 flags 0x02 dlen 10
    L2CAP(d): cid 0x0041 len 6 [psm 0]
      0000: a1 02 00 01 00 00                                 ......
> ACL data: handle 42 flags 0x02 dlen 10
    L2CAP(d): cid 0x0041 len 6 [psm 0]
      0000: a1 02 00 01 00 00                                 ......
> HCI Event: Mode Change (0x14) plen 6
    status 0x00 handle 42 mode 0x00 interval 0
    Mode: Active
> HCI Event: Mode Change (0x14) plen 6
    status 0x00 handle 42 mode 0x02 interval 112
    Mode: Sniff

If I do a sudo hidd --connect [MAC] I get the following:

Can't get device information: Operation already in progress

I'm using an Edimax EB-DGC2 USB 2.0 bluetooth dongle running on Ubuntu
7.10with bluez-utils
3.19-0ubuntu3.

This is a shame, since the Edimax manufacturer's website actually advertises
linux compatibility (
http://www.edimax.co.uk/en/produce_detail.php?pd_id=127&pl1_id=13&pl2_id=43),
but state they don't develop or maintain the drivers. Perhaps they can be
contacted to help provide specs to solve the problem?

Many thanks,
Alex

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/

_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users