Re: Headset, ALSA and other issues

Peter,

You are going to have problems emptying the UART FIFO's fast enough on 
your target hardware at a baud rate fast enough to transfer audio I know 
I have seen these issues before.
You would be better using another medium for the transport USB or SPI or 
something other than a UART.

Regards.
Rod Boyce

Peter Wurmsdobler wrote:
> Hello,
>   
>> 115k is probably too slow to be workable for audio. That's one reason
>> it's more common to connect the adapter to the pc over  usb.
>>     
> you are right in principal. One thing I neglected to mention, however, 
> is that the target hardware is based on the imx27 ADS board. We are 
> going to use the hardware facilities, i.e. UART to the BC4-ROM for 
> control, and PCM over SSI. How this is going to work in terms of routing 
> the signals through ALSA and the Linux kernel, I hope to find out soon.
>
> peter
>
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> Bluez-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>
>   


-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/