Re: Headset not playing audio HELP PLEASE

On Fri, 8 Feb 2008, pramod gurav wrote:

-> On the console where i run the audio service I get these log
-> audio[3032]: Accepted new client connection on unix socket (fd=9) audio[3032]: Audio API: received BT_GETCAPABILITIES_REQ
-> audio[3032]: Got path /org/bluez/hci0 for adapter with address 00:0B:0D:33:9E:FB
-> audio[3032]: /org/bluez/hci0 GetRemoteName(): Not available
-> Passkey request for device 00:0F:DE:B1:02:42


Did you also start auth-agent? My headset uses both:

Passkey request for device 00:1A:45:01:F9:42 
Authorization request for device 00:1A:45:01:F9:42


-> audio[3032]: Audio service discovery completed with success
-> audio[3032]: Found Headset record
-> audio[3032]: Discovered Headset service on RFCOMM channel 1
-> audio[3032]: Selecting default device
-> audio[3032]: Audio API: sending BT_GETCAPABILITIES_RSP
-> audio[3032]: Audio API: received BT_SETCONFIGURATION_REQ
-> audio[3032]: config sbc - frequency = 0 channel_mode = 0 allocation = 0 subbands = 0 blocks = 0 bitpool = 0
-> audio[3032]: State changed /org/bluez/audio/device0: HEADSET_STATE_DISCONNECTED -> HEADSET_STATE_CONNECT_IN_PROGRESS
-> audio[3032]: /org/bluez/audio/device0: Connecting to 00:0F:DE:B1:02:42 channel 1
-> audio[3032]: State changed /org/bluez/audio/device0: HEADSET_STATE_CONNECT_IN_PROGRESS -> HEADSET_STATE_CONNECTED
-> audio[3032]: /org/bluez/audio/device0: Connected to 00:0F:DE:B1:02:42
-> audio[3032]: State changed /org/bluez/audio/device0: HEADSET_STATE_CONNECTED -> HEADSET_STATE_PLAY_IN_PROGRESS
-> audio[3032]: Received AT*ECBP=?
-> audio[3032]: Badly formated or unrecognized command: AT*ECBP=?

I had errors like these the day before. If I remeber right, setting 
force_scofix=1 on the device's module (hci_usb) seemed to clear them up. But I 
forgot if your Bluetooth adapter is usb or not.

Did you pair the devices first? My headset had a button to press which makes 
it pair. I've heard the noise too, like the one you're getting. I upgraded to
3.25, set the force_scofix to 1 and tried a few different values in
audio.conf. After that it just worked.



-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/