Re: How to enable eSCO in linux 2.6.18?

Hey buddy:

 Yes, i'm using a minikit without a motherboard(I don't have a ST
motherboard in hand : ( ). I connect the minikit to my CPU on the
development board with both UART and PCM interface.The version of the
chip is STLC2500C R4.2. I also have ssf file (which can be loaded into
the chip with certain settings)configured with the pcm settings.Please
see the attached file.
 I'll check out my ssf file settings to make sure there's nothing
wrong with my pcm interface settings according to the spec of my
CPU/STLC2500C.Other than that , i have no idea why there's no sound
coming out of the bluetooth headset.....

Thanks!!

semiyd

2008/3/26, Sumeet VERMA <[email protected]>:
> Hi
> Are you using a minikit? What is the version of STLC2500 chip you are using?
> In case you are using minikit along with motherboard you have to enable the
> codec. Otherwise you will not hear any sound.
>
> Regards,
> Sumeet
>
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf Of dong yan
> Sent: Wednesday, March 26, 2008 11:30 AM
> To: BlueZ users
> Subject: Re: [Bluez-users] How to enable eSCO in linux 2.6.18?
>
> Hi Sumeet VERMA:
>
>   Thanks a lot!
>   As a matter of fact , im using ST's bluetooth chip STLC2500. This chip
> can't establish SCO connections under linux 2.6.18, so i had to try eSCO
> connection.....that's why i want this esco patch.  i applied your patch and
> eSCO seems to be connected. But still there's no sound coming out of my
> bluetooth headset...
> When i tried to disconnect the esco channel , hcid reports an error.....
> Please refer to the details in this log:
> (I use 'hstest' from bluez-utils to test the SCO/eSCO.)
>
>  $ hstest play /tmp1/1.wav 00:0D:3C:EB:53:F0 1 Voice setting: 0x0060
> hcid[173]: link_key_request (sba=00:80:E1:00:AB:BA, dba=00:0D:3C:EB:53:F0)
> hcid[173]: link_key_request (sba=00:80:E1:00:AB:BA, dba=00:0D:3C:EB:53:F0)
> RFCOMM channel connected
> KERNEL:sco_connect(): type=2,eSCO
>
> SCO audio channel connected (handle 8, mtu 60)
> hcid[173]: link_key_request (sba=00:80:E1:00:AB:BA, dba=00:0D:3C:EB:53:F0)
>
>
> / $
> / $ hcid[173]: Disconnection failed: 0x0c
>
> At the sametime , if i use another  USB bluetooth module instead of STLC2500
> , i can hear the music with my bluetooth headset after established SCO
> connection.
>
> Please, let me know if you have any other suggestions,thanks!!
>
> semiyd
>
>
> 2008/3/26, Sumeet VERMA <[email protected]>:
> > Hi
> > Please find attached the esco patch for 2.6.18
> >
> > Sumeet
> >
> > -----Original Message-----
> > From: [email protected]
> > [mailto:[email protected]] On Behalf Of
> > Sent: Tuesday, March 25, 2008 11:41 AM
> > To: [email protected]
> > Subject: [Bluez-users] How to enable eSCO in linux 2.6.18?
> >
> >
> > Hi All:
> >        I want to enable eSCO function in linux 2.6.18 for a certain
> > reason.... I know that 2.6.23 with the bluez-2.6.23mh1 patch can
> > enable simple eSCO support. But since i can't upgrade my kernel to
> > 2.6.23+ , is there any patches that can be applied on a 2.6.18 kernel
> > in order to make eSCO connections ?
> >
> >
> >
> > Thanks
> >
> >
> >
> >
> > semiyd
> >
> >
> >
> >
> >
> > _________________________________________________________________
> > News, entertainment and everything you care about at Live.com. Get it now!
> > http://www.live.com/getstarted.aspx
> >
> >
> > ----------------------------------------------------------------------
> > --- Check out the new SourceForge.net Marketplace.
> > It's the best place to buy or sell services for just about anything
> > Open Source.
> > http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marke
> > tplace _______________________________________________
> > Bluez-users mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/bluez-users
> >
> >
> >
>
> -------------------------------------------------------------------------
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services for just about anything Open
> Source.
> http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
> _______________________________________________
> Bluez-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>
>
> -------------------------------------------------------------------------
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services for
> just about anything Open Source.
> http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
> _______________________________________________
> Bluez-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace

_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users